998 (90) 174-57-84
51350100 Pepsin-HCl cleaning solution, 250 ml
SKU: 51350100
Manufacturer: Mettler Toledo
Availability: Order only
Hydrochloric acid solution with pepsin for electrodes cleaning, volume 250 ml.
Designed to effectively clean and remove contaminants from pH electrodes. The solution is specially formulated to support the performance, accuracy and durability of electrodes by removing deposits that can interfere with propper operation.
It is essential to follow the manufacturer's recommendations and instructions for cleaning and maintenance procedures specific to the type of electrode being used.
Recommended products
Recommended products
51344755 PerfectION electrolyte F, 5x60 ml
perfectION Mettler Toledo ion selective electrode filling solution for determining nitrate concentrations.
SKU: 51344755
Compare
HI6007 Calibration solution pH 7.010 ± 0.002 at 25°C
HI6007 is a pH 7.010 +/- 0.002 pH calibration buffer.
SKU: HI6007
HI7010L buffer pH 10.01, volume 500 ml
A pH 10.01 buffer solution is commonly used to calibrate equipment used to analyze samples of water and other liquids.
SKU: HI7010L
Buffer solution pH 7.00, 125 mL
Calibration solution for pH meters and electrodes.
SKU: LZW9461.98
51344750 PerfectION electrolyte A, 5x60 ml
perfectION Mettler Toledo ion selective electrode filling solution for determining calcium, fluoride or sulfide concentrations.
SKU: 51344750
51350076 FRISCOLYT B electrolyte, 250 ml
Electrolyte for filling electrodes.
SKU: 51350076
Ionic Strength Adjustor Nitrate (ISA), 100 pieces
Ionic Strength Adjustor for Hach Ion Selective Electrodes.
SKU: 2984799
51350080 Electrolyte 3 mol/l KCl, 6 x 250 ml
A 3 mol/L potassium chloride (KCl) solution is commonly used as a filling solution for reference electrodes in various electrochemical measurements. The solution is important for maintaining the stable reference potential required for accurate measurements.
SKU: 51350080
ISE standard solution, Fluoride (F-) concentration 10 mg/l; volume 500 ml
Standard Fluoride Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 35949
30095315 All-in-One Kit 2 6x250 ml
The kit contains 250 ml vials with the following components: technical buffers pH 4.01, pH 7.00, pH 10.00, 3 mol/L KCl electrolyte, cleaning solution (pepsin) and InLab storage solution.
SKU: 30095315
Powder Pillows buffer pH 10.01 (blue), 15 pcs
Sealed bags with powder for pH electrode calibration.
SKU: 2227195
HI6004 Calibration solution pH 4.010 ± 0.002 at 25°C
HI6004 is a pH 4.010 +/- 0.002 pH calibration buffer.
SKU: HI6004
51344761 PerfectION calcium ISA, 475 ml
Ionic strength adjuster for obtaining accurate readings from an ion-selective electrode that determines the concentration of calcium.
SKU: 51344761
30095313 Rainbow Kit 2 pH Buffer Set, 6 x 250 ml
Set of pH calibration solutions. The package contains pH 4.01/7.00/10.00 buffers, 2 bottles each.
SKU: 30095313
ISE standard solution, nitrate (NO3-N) concentration 100 mg/l; volume 500 ml
Standard Nitrate Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 194749
51350064 ORP buffer 468 mV/pH 0.1; package 6 x 30 ml
Standard solution for calibrating and checking the accuracy of ORP electrodes.
SKU: 51350064
KCl calibration solution for conductivity meters 1412 μS/cm
Calibration solutions are designed to adjust the measurement accuracy of instruments when measuring the electrical conductivity of water.
SKU: 2974326, 2974349
51350034 Buffer pH 7.00, 250 ml
Certified pH buffer solution for electrode calibration.
SKU: 51350034
30458274 buffer pH 1.679
Calibration solution with a pH value of 1.679. Bottle 250 ml.
SKU: 30458274
Solution 12.88 mS/cm, KCl, 250 mL for conductivity meter calibration
Standard conductivity solution. 12.88 mS/cm ± 0.11 mS/cm @ 25 °C. Potassium chloride (KCl) (0.1 M). Bottle 250 ml.
SKU: LZW9720.99
SKU: HI7072
30094617 Standard solution conductivity 5 µs/cm
Mettler Toledo 30094617 Conductivity Standard is a high quality reference solution with a known and accurate conductivity value. Used to calibrate and test the performance of meters (conductivity meters) and conductivity sensors.
SKU: 30094617
HI7073L Cleansing Solution for Proteins
HI7073L is a solution for cleaning pH electrodes that come into contact with samples containing protein (food, biological samples). The volume of the bottle is 500 ml.
SKU: HI7073L
51350060 ORP buffer 220 mV/pH7, 250 ml
ORP buffer is a standard solution used to test the accuracy of ORP sensors (RedOX).
SKU: 51350060
Recommended products
Conductivity Standard Solution, 1413 µS/cm
Standard conductivity solution, concentration 1413 μS/cm ± 1% at 25 °C / 0.01M KCl, 500 ml.
SKU: C20C270
Calibration solution for conductivity meter 1413 µS/cm, KCl, 125 mL
1413 μS/cm conductivity reference solution for calibrating the conductivity meter / cell and verifying the accuracy of the analysis performed.
SKU: LZW9711.99
HI7033L Conductivity standard 84 µS/cm (500 ml bottle)
HI7033L is a superior conductivity standard with a conductivity value of 84 µS/cm, prepared from a potassium chloride solution, traceable to NIST.
SKU: HI7033L
Conductivity calibration solution 12.88 mS/cm, KCl, 125 mL
Standard conductivity solution. 12.88 mS/cm ± 0.11 mS/cm @ 25 °C. Potassium chloride (KCl) (0.1 M). Bottle 125 ml.
SKU: LZW9721.99
51340294 Electrolyte InLab 605, 25 ml bottle
Electrolyte for reference electrodes.
SKU: 51340294
HI700640P Cleaning Solution for Milk Deposits (25 x 20 mL Sachets)
Cleaning solution for electrodes in easy-to-use sachets.
SKU: HI700640P
HI70004P pH 4.01 buffer solution for calibration (25 x 20 ml)
HI70004P contains 25 sachets containing 20 ml buffer solution for calibrating pH meters and electrodes.
SKU: HI70004P
51350034 Buffer pH 7.00, 250 ml
Certified pH buffer solution for electrode calibration.
SKU: 51350034
51350108 Ionic Strength Adjustor 0.9 mol/L Al2(SO4)3, 250 ml
Accurate ion determination requires the correct solution (ISA) to adjust ionic strength. This solution is used in determining the concentration of nitrate, fluoroborate, lithium, ammonium and potassium ions.
SKU: 51350108
