998 (90) 174-57-84
51350064 ORP buffer 468 mV/pH 0.1; package 6 x 30 ml
SKU: 51350064
Manufacturer: Mettler Toledo
Availability: Order only
Standard solution with a value of 468 mV/pH 0.1 for calibrating and checking the accuracy of ORP electrodes.
The package contains 6 bottles of 30 ml each.
Specifications Recommended products
Specifications
Specifications
| Parameters | ORP (redox potential) |
| Measurement Range | 468 mV |
| Quantity | 6 х 30 mL |
Recommended products
30464189 Calibration solution pH 8.00
Technical buffer solution pH 8.00 ± 0.02
SKU: 30464189
Compare
Buffer Solution, pH 4,65
Buffer Solution, concentration pH 4,65 ± 0,02, 500 mL.
SKU: S11M010
51350092 Conductivity standard 1413 µS/cm, 250 ml
Solution for calibration and verification of devices that measure the electrical conductivity of solutions.
SKU: 51350092
Filling Solution, Reference, Saturated KCl, 59 mL
Filling solution for electrode reference element, Potassium Chloride (KCl), Saturated, 59 mL bottle.
SKU: 25118026
51350032 pH 4.01 certified buffer solution, 250 ml
Color coded calibration solution for pH electrodes. Bottle 250 ml.
SKU: 51350032
Buffer Solution, pH 10,01
Buffer Solution, concentration pH 10,01 ± 0,02, 500 mL.
SKU: 1222149
Calibration solution ph 4.01, 250 mL
Buffer solution with a standard pH value for calibrating and verifying the accuracy of pH electrodes and hydrogen ion meters.
SKU: LZW9463.99
51300140 Tablets for preparing solutions with zero dissolved oxygen content
These tablets make it easy to prepare a zero dissolved oxygen solution. The resulting solution is then used to calibrate and verify accuracy when measuring low dissolved oxygen concentrations.
SKU: 51300140
Powder Pillows buffer, pH 10.01 blue 250 pcs.
Standard for the calibration of electrodes. pH buffer in powder for dilution. The color coding is blue.
SKU: 2227164
51344754 PerfectION electrolyte E, 5x60 ml
perfectION Mettler Toledo ion selective electrode filling solution for determining potassium concentrations.
SKU: 51344754
51350108 Ionic Strength Adjustor 0.9 mol/L Al2(SO4)3, 250 ml
Accurate ion determination requires the correct solution (ISA) to adjust ionic strength. This solution is used in determining the concentration of nitrate, fluoroborate, lithium, ammonium and potassium ions.
SKU: 51350108
51107885 Electrolyte for DX224-Mg 20 ml
Electrolyte for ion-selective electrode determining Magnesium ions.
SKU: 51107885
51343185 FRISCOLYT B electrolyte, 25 ml
Electrolyte for filling electrodes.
SKU: 51343185
Solution 12.88 mS/cm, KCl, 250 mL for conductivity meter calibration
Standard conductivity solution. 12.88 mS/cm ± 0.11 mS/cm @ 25 °C. Potassium chloride (KCl) (0.1 M). Bottle 250 ml.
SKU: LZW9720.99
Electrolyte solution for ozone sensor 9185 sc
Volume 100 ml.
SKU: Z09185=A=3600
Conductivity calibration solution 10000 μS/cm, NaCl, 50 ml
Standard solution for calibrating TDS meters and conductivity meters.
SKU: 2972226
51350018 Technical buffer pH 4.01, 6 x 250 ml
pH buffer with a value of 4.01 for calibrating ph electrodes and ph meters.
SKU: 51350018
30094617 Standard solution conductivity 5 µs/cm
Mettler Toledo 30094617 Conductivity Standard is a high quality reference solution with a known and accurate conductivity value. Used to calibrate and test the performance of meters (conductivity meters) and conductivity sensors.
SKU: 30094617
ISE standard sodium solution (Na +) concentration 1000 mg/l; volume 500 ml
Standard Sodium Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 1474949
Filling Solution, Reference, 3 M KCl, 50 mL
Filling solution for electrode reference element, Potassium Chloride (KCl), 3 M, 50 mL bottle.
SKU: 2756559
30095315 All-in-One Kit 2 6x250 ml
The kit contains 250 ml vials with the following components: technical buffers pH 4.01, pH 7.00, pH 10.00, 3 mol/L KCl electrolyte, cleaning solution (pepsin) and InLab storage solution.
SKU: 30095315
301111389 Buffer pH 10.012 sachets 30x20 ml
Sealed sachets with fresh pH buffer solution for single use.
SKU: 30111139
Singlet Single-use Conductivity Standard Solution, 147 µS/cm
Conductivity Standard Solution. Concentration 147 µS/cm at 25°C ±10% at 25°C. Pack of 20, 20 mL each.
SKU: 2771320
1.09475 Buffer solution pH 4.00, red (20 °C)
The red buffer solution (composition: citric acid/sodium hydroxide/hydrogen chloride) is prepared gravimetrically using high-quality reagents in accordance with DIN EN ISO/IEC 17025.
SKU: 1094750500
Recommended products
Conductivity Standard Solution, 1413 µS/cm
Standard conductivity solution, concentration 1413 μS/cm ± 1% at 25 °C / 0.01M KCl, 500 ml.
SKU: C20C270
51343182 Electrolyte KNO3 1M; 25 ml
Solution 51343182 is recommended for use with Mettler Toledo DX Series electrodes for the determination of ammonium, potassium and nitrate.
SKU: 51343182
30095312 Rainbow Kit 1 pH Buffer Set, 6 x 250 ml
Set of pH calibration solutions. The package contains pH 4.01/7.00/9.21 buffers, 2 bottles each.
SKU: 30095312
HI7041M Electrolyte for Dissolved Oxygen Sensors
The HI7041M electrolyte is designed for Hanna Instruments polarographic dissolved oxygen sensors. The correct filling solution is critical to the performance of your Dissolved Oxygen Sensor.
SKU: HI7041M
51344761 PerfectION calcium ISA, 475 ml
Ionic strength adjuster for obtaining accurate readings from an ion-selective electrode that determines the concentration of calcium.
SKU: 51344761
ISE standard sodium solution (Na +) concentration 1000 mg/l; volume 500 ml
Standard Sodium Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 1474949
51350002 Technical Buffer pH 2.00
Calibration solution for pH electrodes with pH value 2.00 ± 0.02
SKU: 51350002
51350034 Buffer pH 7.00, 250 ml
Certified pH buffer solution for electrode calibration.
SKU: 51350034
51107893 Electrolyte for DX226-CN 20 ml
Electrolyte for ion-selective electrode determining Cyanide ions.
SKU: 51107893
