998 (90) 174-57-84
51343180 Electrolyte KCl 3M 25 ml
SKU: 51343180
Manufacturer: Mettler Toledo
Availability: Order only
An electrolyte is used to ensure the correct operation of the pH electrode. It serves to maintain a stable potential and provides accurate pH measurements. To select the correct electrolyte, refer to the instructions for your pH electrode.
The volume of the bottle is 25 ml.
Recommended products
Recommended products
Compare
51340035 Electrolyte for DX218-NH4, 20 ml
Solution for filling the DX218-NH4 electrode.
SKU: 51340035
Conductivity Standard Solution, 146,9 µS/cm
Calibration solution, concentration 146.9 μS/cm ± 2.5% at 25 °C / 0.001M KCl, 500 ml.
SKU: C20C280
HI700663P Cleaning Solution for Soil Deposits (25 x 20 mL Sachets)
Cleaning solution for electrodes in easy-to-use sachets.
SKU: HI700663P
Solution for cleaning pH electrodes from minerals / inorganic samples, 500 ml
Using cleaning solutions will provide faster measurements, improve pH accuracy, and extend the life of the pH meter electrode.
SKU: 2975149
108700 WTW TEP 4: Technical buffer solution, pH 4.01 (1 liter)
Buffer solution for pH meters calibration. Ph value is 4.01
SKU: 108700
51344776 Standard solution for ISE 1000 mg/l I⁻
The iodide standard solution for ion selective electrodes provides accurate reference points for reliable measurements of iodide ion concentrations in samples.
SKU: 51344776
51350094 Conductivity standard 12.88 mS/cm, 250 ml
Solution for calibration and verification of devices that measure the electrical conductivity of solutions.
SKU: 51350094
pH Buffer Solution, pH 10.01
pH Buffer Solution, concentration pH 10.01± 0,02, 500 mL.
SKU: 2283649.99
Calibration solution ph 10.01, 250 ml
PH buffer solution 10.01 ± 0.02 pH at 25 °C for checking the accuracy of pH meters and electrodes.
SKU: LZW9471.99
Electrode cleaning solution, 500 mL
Solution for regular maintenance of Hach Lange pH electrodes.
SKU: 2965249
51350016 Buffer pH 2.00, 6 x 250 ml
Technical buffer solution pH 2.00 ± 0.02. The package contains 6 bottles of 250 ml.
SKU: 51350016
Singlet Single-Use pH Buffer, pH 10,01
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is 10,01 ±0.02 at 25°C. Pack of 20 of pH 10,01, 20 mL each.
SKU: 2770220
51350046 Buffer pH 9.21, 6 x 250 ml
Solution with a standard pH value of 9.21±0.02
SKU: 51350046
KCl calibration solution for conductivity meters 146.9 μS/cm
Calibration solutions are designed to adjust the measurement accuracy of instruments when measuring the electrical conductivity of water.
SKU: 2974226, 2974249
51350096 Conductivity standard 1413 µS/cm, 6 x 250 ml
Solution for calibration and verification of the accuracy of conductometers and conductivity sensors.
SKU: 51350096
HI70630L Acidic solution for cleaning pH electrodes from fats
HI70630L is an effective acidic cleaning solution specially designed for pH electrodes to be immersed in fat containing samples.
SKU: HI70630L
51107898 Electrolyte for DX327-I electrode
The electrolyte serves to create a stable and well defined electrochemical environment within the DX327-I ion selective electrode.
SKU: 51107898
Calibration solutions for TDS meters 300 ppm
The solutions are designed to check the accuracy of measurement and calibration of devices in the analysis of conductivity and total salinity (salinity) of water.
SKU: 2974626, 2974649
Certified Conductivity Standard Solution, 1408 µS/cm
KCl 0.1D Conductivity calibration solution. Concentration 1408 μS/cm ± 0.5% at 25 °C, 500 ml.
SKU: S51M003
51107885 Electrolyte for DX224-Mg 20 ml
Electrolyte for ion-selective electrode determining Magnesium ions.
SKU: 51107885
ISE standard solution, Fluoride (F-) concentration 10 mg/l; volume 500 ml
Standard Fluoride Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 35949
51107889 Electrolyte for DX264-Cu electrode
The electrolyte serves to create a stable and well defined electrochemical environment within the DX264-Cu ion selective electrode.
SKU: 51107889
51340036 Electrolyte for GSE Ammonia Electrode
Electrolyte to ensure stable operation and accurate measurements by the GSE Ammonia Electrode.
SKU: 51340036
Recommended products
Calibration solutions for TDS meters 300 ppm
The solutions are designed to check the accuracy of measurement and calibration of devices in the analysis of conductivity and total salinity (salinity) of water.
SKU: 2974626, 2974649
ISE Ammonia Standard Solution, 10 mg/L, 500 mL
ISE Standard Solution. Ammonia, 10,0 mg/L ±0,5 mg/L NH3-N. 500 mL bottle.
SKU: 15349
Calibration solution for conductivity meter 147 μS/cm, KCl, 125 mL
Solution for calibrating the conductivity meter and checking the accuracy of the analysis.
SKU: LZW9701.99
51340033 Electrolyte for DX239-K electrode, 20 ml
Electrolyte to ensure stable operation of the DX239-K potassium ion selective electrode and to ensure accurate measurements of the concentration of potassium ions in solutions.
SKU: 51340033
51350086 Electrolyte KNO3 1M; 6 x 250 ml
Solution 51350086 is recommended for use with Mettler Toledo DX Series electrodes for the determination of ammonium, potassium and nitrate.
SKU: 51350086
Filling Solution, ISENa381, 0,02 M NH4Cl, 59 mL
Filling solution for Sodium Ion Selective Electrode (ISENa381), Ammonium Chloride (NH4Cl), 0,02 M, 59 mL bottle.
SKU: 2965126
Conductivity Standard Solution, 1413 µS/cm
Standard conductivity solution, concentration 1413 μS/cm ± 1% at 25 °C / 0.01M KCl, 500 ml.
SKU: C20C270
ISE standard solution, nitrate (NO3-N) concentration 100 mg/l; volume 500 ml
Standard Nitrate Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 194749
30090856 Calcium standard solution 10 mg/l Ca
A pre-mixed solution with an accurately known concentration of calcium (Ca) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090856
