998 (90) 174-57-84
51344761 PerfectION calcium ISA, 475 ml
SKU: 51344761
Manufacturer: Mettler Toledo
Availability: Order only
PerfectION ionic strength adjuster for accurate calcium ion-selective electrode readings. The bottle contains 475 ml.
A solution is used to change the ionic strength of a solution to achieve specific experimental conditions or to standardize the ionic environment for certain measurements or reactions.
Recommended products
Recommended products
Calibration solution ph 7.00, 250 mL
Buffer solution for calibration and accuracy check of pH electrodes and hydrogen ion meters, pH is 7.00 ± 0.02 pH at 25 °C
SKU: LZW9464.98
Compare
51107889 Electrolyte for DX264-Cu electrode
The electrolyte serves to create a stable and well defined electrochemical environment within the DX264-Cu ion selective electrode.
SKU: 51107889
Conductivity Standard Solution, 146,9 µS/cm
Calibration solution, concentration 146.9 μS/cm ± 2.5% at 25 °C / 0.001M KCl, 500 ml.
SKU: C20C280
NaCl solution for conductivity meter calibration 1990 μS/cm, 100 mL
Standard solution for tds and conductivity meters.
SKU: 210542
51344755 PerfectION electrolyte F, 5x60 ml
perfectION Mettler Toledo ion selective electrode filling solution for determining nitrate concentrations.
SKU: 51344755
51302069 Buffer pH 4.01 in sachets 30x20 ml
Disposable pH buffer sachets from Mettler Toledo. The solution is poured into the package under controlled conditions, ensuring a fresh and clean solution for every pH electrode calibration.
SKU: 51302069
ISE standard sodium solution (Na +) concentration 1000 mg/l; volume 500 ml
Standard Sodium Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 1474949
HI6010 Calibration solution pH 10.010 ± 0.002 at 25°C
HI6010 is a pH 10.010 +/- 0.002 pH calibration buffer.
SKU: HI6010
51344762 PerfectION potassium ISA, 475 ml
Ionic strength adjuster for obtaining accurate readings from an ion-selective electrode that determines the concentration of potassium.
SKU: 51344762
Conductivity calibration solution 12.88 mS/cm, KCl, 125 mL
Standard conductivity solution. 12.88 mS/cm ± 0.11 mS/cm @ 25 °C. Potassium chloride (KCl) (0.1 M). Bottle 125 ml.
SKU: LZW9721.99
51107898 Electrolyte for DX327-I electrode
The electrolyte serves to create a stable and well defined electrochemical environment within the DX327-I ion selective electrode.
SKU: 51107898
HI6016 Calibration solution pH 1.679 ± 0.002 at 25°C
HI6016 is a pH 1.679 +/- 0.002 pH calibration buffer.
SKU: HI6016
pH Buffer Solution, pH 10.01
pH Buffer Solution, concentration pH 10.01± 0,02, 500 mL.
SKU: 2283649.99
Buffer Solution, pH 9,23
Buffer Solution, concentration pH 9,23 ± 0,02, 500 mL.
SKU: S11M011
51340031 Electrolyte for DX219-F 20 ml
Electrolyte for ion-selective electrode determining Fluoride ions.
SKU: 51340031
51343185 FRISCOLYT B electrolyte, 25 ml
Electrolyte for filling electrodes.
SKU: 51343185
30458274 buffer pH 1.679
Calibration solution with a pH value of 1.679. Bottle 250 ml.
SKU: 30458274
30090860 Ammonium standard solution 100 mg/l
A pre-mixed solution with an accurately known concentration of ammonium (NH4) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090860
51350108 Ionic Strength Adjustor 0.9 mol/L Al2(SO4)3, 250 ml
Accurate ion determination requires the correct solution (ISA) to adjust ionic strength. This solution is used in determining the concentration of nitrate, fluoroborate, lithium, ammonium and potassium ions.
SKU: 51350108
51340029 Electrolyte for DX280-Br electrode
The electrolyte serves to create a stable and well defined electrochemical environment within the DX280-Br ion selective electrode.
SKU: 51340029
Certified Buffer Standard Solution, pH 7,413
Certified Buffer Standard Solution, pH 7,413 ±0.010 pH at 25°C, 500 mL.
SKU: S11M005
HI70010P pH 10.01 Calibration Solution, 25 x 20 ml sachets
pH buffer for electrode calibration with a pH value of 10.01 ± 0.01 pH at 25°C
SKU: HI70010P
HI70007P pH 7.01 Calibration Solution, 25 x 20 ml sachets
Buffer solution with a pH value of 7.01 for calibrating pH meters and electrodes. The package contains 25 sachets with 20 ml of solution.
SKU: HI70007P
51107875 Electrolyte for DX407-Pb electrode
The electrolyte serves to create a stable and well defined electrochemical environment within the DX407-Pb ion selective electrode.
SKU: 51107875
Recommended products
Powder Pillows buffer, pH 6.86, 15 pcs.
Calibration buffer for pH meter in powder form for dilution.
SKU: 1409895
51302049 Conductivity standard 1413 µS/cm, sachets 30x20ml
A solution with a standard conductivity value of 1413 µS/cm for calibrating conductivity sensors.
SKU: 51302049
Solution 12.88 mS/cm, KCl, 250 mL for conductivity meter calibration
Standard conductivity solution. 12.88 mS/cm ± 0.11 mS/cm @ 25 °C. Potassium chloride (KCl) (0.1 M). Bottle 250 ml.
SKU: LZW9720.99
1.09475 Buffer solution pH 4.00, red (20 °C)
The red buffer solution (composition: citric acid/sodium hydroxide/hydrogen chloride) is prepared gravimetrically using high-quality reagents in accordance with DIN EN ISO/IEC 17025.
SKU: 1094750500
51350078 Electrolyte KNO3 1M; 250 ml
Solution 51350078 is recommended for use with Mettler Toledo DX Series electrodes for the determination of ammonium, potassium and nitrate.
SKU: 51350078
51302070 Buffer pH 9.21 in sachets 30x20 ml
Disposable pH buffer sachets from Mettler Toledo. The solution is poured into the package under controlled conditions, ensuring a fresh and clean solution for every pH electrode calibration.
SKU: 51302070
51302079 Buffer pH 10.01 in sachets 30x20 ml
Disposable pH buffer sachets from Mettler Toledo. The solution is poured into the package under controlled conditions, ensuring a fresh and clean solution for every pH electrode calibration.
SKU: 51302079
Calibration solution ph 4.01, 250 mL
Buffer solution with a standard pH value for calibrating and verifying the accuracy of pH electrodes and hydrogen ion meters.
SKU: LZW9463.99
Buffer solution pH 7.00, 125 mL
Calibration solution for pH meters and electrodes.
SKU: LZW9461.98
