+998 (90) 174-57-84
Solution for cleaning ph electrodes from fats, oils and greases, 500 ml
SKU: 2964449
Manufacturer: Hach
Availability: Order only
Cleaning solution for pH electrodes to remove grease, oil and fat deposits from the sensing element. After cleaning, rinse the electrode with deionized water, then store in a storage solution at the recommended pH.
Volume: 500 ml.
Formula: KATHON CG, TRITON X
Specifications Recommended products
Specifications
Specifications
| Type | Liquid reagents |
| Quantity | 500 mL |
| Formula | KATHON CG, TRITON X |
Recommended products
Calibration solution for conductivity meter 1413 µS/cm, KCl, 125 mL
1413 μS/cm conductivity reference solution for calibrating the conductivity meter / cell and verifying the accuracy of the analysis performed.
SKU: LZW9711.99
Compare
pH Buffer Solution, pH 4.01
pH Buffer Solution, concentration 4.01 ± 0.02 pH, 500 mL.
SKU: 2283449.99
51350018 Technical buffer pH 4.01, 6 x 250 ml
pH buffer with a value of 4.01 for calibrating ph electrodes and ph meters.
SKU: 51350018
30090859 Ammonium standard solution 1000 mg/l
A pre-mixed solution with an accurately known concentration of ammonium (NH4) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090859
Certified Conductivity Standard Solution, 1015 µS/cm
Certified solution with standard conductivity, 0.05% sodium chloride (NaCl), concentration 1015 μS/cm ± 0.5% at 25 °C, 500 ml.
SKU: S51M004
51340033 Electrolyte for DX239-K electrode, 20 ml
Electrolyte to ensure stable operation of the DX239-K potassium ion selective electrode and to ensure accurate measurements of the concentration of potassium ions in solutions.
SKU: 51340033
pH Buffer Solution, pH 10.01
pH Buffer Solution, concentration pH 10.01± 0,02, 500 mL.
SKU: 2283649.99
HI700640P Cleaning Solution for Milk Deposits (25 x 20 mL Sachets)
Cleaning solution for electrodes in easy-to-use sachets.
SKU: HI700640P
HI7007L buffer solution pH 7.01, volume 500 ml
pH 7.01 is the most widely used value of all buffer solutions.
SKU: HI7007L
ORP buffer solution for calibration, 600 mV
Reference solution for calibration of ORP electrodes (sealed plastic bottle).
SKU: 25M2A1002-115
ISE Ammonia Standard Solution, 1000 mg/L, 1 L
ISE Standard Solution. Ammonia, 1000 mg/L ±20 mg/L NH3-N. 1 L bottle.
SKU: 2354153
Certified Buffer Standard Solution, pH 12,45
Certified Buffer Standard Solution, pH 12,45 ±0,05 pH at 25°C, 500 mL.
SKU: S11M008
51107875 Electrolyte for DX407-Pb electrode
The electrolyte serves to create a stable and well defined electrochemical environment within the DX407-Pb ion selective electrode.
SKU: 51107875
ISE standard solution, nitrate (NO3-N) concentration 1000 mg/l; volume 500 ml
Standard Nitrate Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 1279249
51350080 Electrolyte 3 mol/l KCl, 6 x 250 ml
A 3 mol/L potassium chloride (KCl) solution is commonly used as a filling solution for reference electrodes in various electrochemical measurements. The solution is important for maintaining the stable reference potential required for accurate measurements.
SKU: 51350080
HI7061L Universal pH Electrode Cleaning Solution (500 ml)
HI7061L is a general purpose cleaning solution for use with pH and ORP electrodes that can be used for a variety of applications.
SKU: HI7061L
Buffer Solution, pH 9,23
Buffer Solution, concentration pH 9,23 ± 0,02, 500 mL.
SKU: S11M011
30464188 pH 5.00 technical buffer solution
Buffer solution with a pH value of 5.00 ± 0.02 for calibrating pH electrodes.
SKU: 30464188
ISE Ammonia Standard Solution, 10 mg/L, 500 mL
ISE Standard Solution. Ammonia, 10,0 mg/L ±0,5 mg/L NH3-N. 500 mL bottle.
SKU: 15349
ISE standard solution, Fluoride (F-) concentration 2 mg/l; volume 500 ml
Standard Fluoride Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 40520
51350100 Pepsin-HCl cleaning solution, 250 ml
Hydrochloric acid solution with pepsin for cleaning electrodes.
SKU: 51350100
51350108 Ionic Strength Adjustor 0.9 mol/L Al2(SO4)3, 250 ml
Accurate ion determination requires the correct solution (ISA) to adjust ionic strength. This solution is used in determining the concentration of nitrate, fluoroborate, lithium, ammonium and potassium ions.
SKU: 51350108
Buffer Solution, pH 1,09
Buffer Solution, concentration pH 1,09 ± 0,02, 500 mL.
SKU: S11M009
HI6007 Calibration solution pH 7.010 ± 0.002 at 25°C
HI6007 is a pH 7.010 +/- 0.002 pH calibration buffer.
SKU: HI6007
Recommended products
HI70630L Acidic solution for cleaning pH electrodes from fats
HI70630L is an effective acidic cleaning solution specially designed for pH electrodes to be immersed in fat containing samples.
SKU: HI70630L
51350104 Electrode regeneration solution
Solution for the restoration of glass pH electrodes.
SKU: 51350104
51350022 Technical buffer pH 9.21, 6 x 250 ml
pH buffer for calibrating electrodes and pH meters.
SKU: 51350022
51344761 PerfectION calcium ISA, 475 ml
Ionic strength adjuster for obtaining accurate readings from an ion-selective electrode that determines the concentration of calcium.
SKU: 51344761
301111389 Buffer pH 10.012 sachets 30x20 ml
Sealed sachets with fresh pH buffer solution for single use.
SKU: 30111139
51350016 Buffer pH 2.00, 6 x 250 ml
Technical buffer solution pH 2.00 ± 0.02. The package contains 6 bottles of 250 ml.
SKU: 51350016
Singlet Single-Use pH Buffer, pH 4,01
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is 4,01 ±0.02 at 25°C. Pack of 20 of pH 4,01 pH, 20 mL each.
SKU: 2770020
Solution 12.88 mS/cm, KCl, 250 mL for conductivity meter calibration
Standard conductivity solution. 12.88 mS/cm ± 0.11 mS/cm @ 25 °C. Potassium chloride (KCl) (0.1 M). Bottle 250 ml.
SKU: LZW9720.99
51350098 Conductivity standard 12.88 mS/cm, 6 x 250 ml
Solution for calibration and verification of the accuracy of conductometers and conductivity sensors.
SKU: 51350098
