998 (90) 174-57-84
30095314 All-in-One Kit 1 6x250 ml
SKU: 30095314
Manufacturer: Mettler Toledo
Availability: Order only
Mettler Toledo All-in-One Kit 1 contains 6 x 250 ml bottles with the following components:
- technical buffers pH 4.01 / pH 7.00 / pH 9.21
- electrolyte KCl 3 mol/l
- cleaning solution (pepsin)
- InLab storage solution
The kit is ideal for maintenance and calibration of pH electrodes.
Recommended products
Recommended products
HI70031P Conductivity Standard 1413 µS/cm (25 x 20 ml sachets)
HI70031P is a premium solution with a conductivity of 1413 µS/cm that complies with NIST standards and comes in convenient disposable sachets.
SKU: HI70031P
Compare
NaCl solution for conductivity meter calibration 18000 μS/cm, 100 mL
Standard solution for tds and conductivity meters.
SKU: 2307442
ISE standard solution, Fluoride (F-) concentration 10 mg/l; volume 500 ml
Standard Fluoride Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 35949
Calibration solutions for TDS meters 300 ppm
The solutions are designed to check the accuracy of measurement and calibration of devices in the analysis of conductivity and total salinity (salinity) of water.
SKU: 2974626, 2974649
Certified Buffer Standard Solution, pH 1.679
Certified Buffer Standard Solution,1.679 ±0.010 pH at 25°C.
SKU: S11M001
Conductivity calibration solution 12.88 mS/cm, KCl, 125 mL
Standard conductivity solution. 12.88 mS/cm ± 0.11 mS/cm @ 25 °C. Potassium chloride (KCl) (0.1 M). Bottle 125 ml.
SKU: LZW9721.99
51350098 Conductivity standard 12.88 mS/cm, 6 x 250 ml
Solution for calibration and verification of the accuracy of conductometers and conductivity sensors.
SKU: 51350098
51350078 Electrolyte KNO3 1M; 250 ml
Solution 51350078 is recommended for use with Mettler Toledo DX Series electrodes for the determination of ammonium, potassium and nitrate.
SKU: 51350078
HI70300L pH electrode storage solution (500 ml)
HI70300L is an electrode storage solution formulated with chemicals that can be used to keep your pH and ORP electrodes performing optimally. When the pH electrode is stored properly in solution, the glass membrane is well hydrated, which ensures proper functioning and accurate readings.
SKU: HI70300L
Conductivity calibration solution 10000 μS/cm, NaCl, 50 ml
Standard solution for calibrating TDS meters and conductivity meters.
SKU: 2972226
HI700601P Electrode Cleaning Solution (25 sachets x 20 ml)
Cleaning solution for general purpose pH electrodes.
SKU: HI700601P
30111142 InLab Electrode Storage Solution
Solution for storage of electrodes.
SKU: 30111142
Certified Buffer Standard Solution, pH 4,005
Certified Buffer Standard Solution, pH 4.005 ±0.010 pH at 25°C, 500 mL.
SKU: S11M002
Cleaning solution for pH electrodes, RENOVO.X extra strong, 250 mL
Electrode cleaning solution, RENOVO.X extra strong Hach Lange.
SKU: S16M002
51344753 PerfectION electrolyte D, 5x60 ml
perfectION Mettler Toledo ion selective electrode filling solution for determining iodide and copper concentrations.
SKU: 51344753
Buffer Solution, pH 10,01
Buffer Solution, concentration pH 10,01 ± 0,02, 500 mL.
SKU: 1222149
ISE Ammonia Standard Solution, 1000 mg/L, 1 L
ISE Standard Solution. Ammonia, 1000 mg/L ±20 mg/L NH3-N. 1 L bottle.
SKU: 2354153
Calibration solution ph 4.01, 250 mL
Buffer solution with a standard pH value for calibrating and verifying the accuracy of pH electrodes and hydrogen ion meters.
SKU: LZW9463.99
108700 WTW TEP 4: Technical buffer solution, pH 4.01 (1 liter)
Buffer solution for pH meters calibration. Ph value is 4.01
SKU: 108700
ISE Ammonia Standard Solution, 10 mg/L, 500 mL
ISE Standard Solution. Ammonia, 10,0 mg/L ±0,5 mg/L NH3-N. 500 mL bottle.
SKU: 15349
30090851 Standard solution 100 mg/l (fluoride)
The standard fluoride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of fluoride ions (F). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of fluoride ions in the sample.
SKU: 30090851
HI7007L buffer solution pH 7.01, volume 500 ml
pH 7.01 is the most widely used value of all buffer solutions.
SKU: HI7007L
51350010 Buffer pH 10.00, 250 ml
Technical buffer solution for calibration of ph meters and electrodes.
SKU: 51350010
30111136 Buffer pH 4.006 sachets 30x20 ml
Sealed sachets with fresh pH buffer solution for single use.
SKU: 30111136
Recommended products
Solution for cleaning pH electrodes from proteins / organic substances, 250 ml
The solution is intended for cleaning the sensitive element of the electrode from contaminants such as proteins and other organic contaminants.
SKU: C20C370
Certified Buffer Standard Solution, pH 1.679
Certified Buffer Standard Solution,1.679 ±0.010 pH at 25°C.
SKU: S11M001
Powder Pillows sachets, buffer pH 7.00 (yellow) 250 pcs.
Powder pH buffer 7.00 (yellow) in individual, color-coded sealed sachets for easy identification.
SKU: 2227064
51344762 PerfectION potassium ISA, 475 ml
Ionic strength adjuster for obtaining accurate readings from an ion-selective electrode that determines the concentration of potassium.
SKU: 51344762
pH Buffer Solution, pH 10.01
pH Buffer Solution, concentration pH 10.01± 0,02, 500 mL.
SKU: 2283649.99
51340031 Electrolyte for DX219-F 20 ml
Electrolyte for ion-selective electrode determining Fluoride ions.
SKU: 51340031
51302047 Buffer pH 7.00 in sachets 30x20 ml
Disposable pH buffer sachets from Mettler Toledo. The solution is poured into the package under controlled conditions, ensuring a fresh and clean solution for every pH electrode calibration.
SKU: 51302047
51344771 Calcium standard solution 1000 mg/l
A pre-mixed solution with an accurately known concentration of calcium (Ca) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 51344771
51343185 FRISCOLYT B electrolyte, 25 ml
Electrolyte for filling electrodes.
SKU: 51343185
