998 (90) 174-57-84
HI70300L pH electrode storage solution (500 ml)
SKU: HI70300L
Manufacturer: Hanna Instruments
Availability: In stock
Hanna Instruments HI70300L Electrode Storage Solution is formulated with chemicals that are ideal for optimal performance of pH and ORP electrodes. By storing the pH electrode in this solution, the glass membrane is well hydrated to ensure proper functioning and accurate readings of your sensor's pH measurements.
Description Specifications Recommended products
Description
Description
- Special formula to minimize bacterial growth on the electrode.
- Clearly marked expiration date and batch number.
- Designed to store any pH or ORP electrode.
When not in use, the sensor tip and reference junction should remain moist. Placing the pH electrode in a small beaker filled with storage solution or replacing the solution in the protective cap is an easy way to store the electrode. The HI70300L should also be used to rehydrate the electrode after cleaning by soaking it for at least one hour before taking measurements.
Never store pH or ORP electrodes in distilled or deionized water. This will shorten the life of the sensor.
Specifications
| Quantity | |
| Shelf life | 5 years |
Recommended products
KCl calibration solution for conductivity meters 146.9 μS/cm
Calibration solutions are designed to adjust the measurement accuracy of instruments when measuring the electrical conductivity of water.
SKU: 2974226, 2974249
Compare
Calibration solution for conductivity meter 147 μS/cm, KCl, 250 ml
Sodium chloride standard solution for checking the accuracy of the conductivity analysis procedure of the aqueous solution and the instrument being measured.
SKU: LZW9700.99
51340034 Electrolyte for DX262-NO3 ISE electrode, 20 ml
Electrolyte to ensure stable operation of the DX262-NO3 Nitrate ion selective electrode and to ensure accurate measurements of the concentration of Nitrate ions in solutions.
SKU: 51340034
Conductivity Standard Solution, 146,9 µS/cm
Calibration solution, concentration 146.9 μS/cm ± 2.5% at 25 °C / 0.001M KCl, 500 ml.
SKU: C20C280
108702 WTW TEP 7: Technical buffer solution, pH 7.00 (1 liter)
Buffer solution for pH meters calibration. Ph value is 7.00
SKU: 108702
Calibration solutions for TDS meters 30 ppm
Solutions are designed to adjust the measurement accuracy of devices when measuring conductivity and total dissolved solids (salinity) of water.
SKU: 2974526, 2974549
30090851 Standard solution 100 mg/l (fluoride)
The standard fluoride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of fluoride ions (F). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of fluoride ions in the sample.
SKU: 30090851
51344761 PerfectION calcium ISA, 475 ml
Ionic strength adjuster for obtaining accurate readings from an ion-selective electrode that determines the concentration of calcium.
SKU: 51344761
Buffer solution pH 7.00 25 mL
Colorless pH meter calibration solution.
SKU: 1222220
Buffer solution pH 4.01, 125 mL
Calibration solution with standard pH value for pH meters and electrodes.
SKU: LZW9460.99
Ammonia Ionic Strength Adjustor (ISA) Powder Pillows, pk/100
Ammonia Ionic Strength Adjustor (ISA) for Ammonia determinations by Ion Selective Electrode (ISE) method. Ideal for low Ammonia level readings. Pack of 100 powder pillows.
SKU: 4447169
HI70039P Conductivity Standard 5000 µS/cm (25 x 20 ml sachets)
HI70039P is a premium solution with a conductivity of 5000 µS/cm that complies with NIST standards and comes in convenient disposable sachets.
SKU: HI70039P
51107875 Electrolyte for DX407-Pb electrode
The electrolyte serves to create a stable and well defined electrochemical environment within the DX407-Pb ion selective electrode.
SKU: 51107875
51343182 Electrolyte KNO3 1M; 25 ml
Solution 51343182 is recommended for use with Mettler Toledo DX Series electrodes for the determination of ammonium, potassium and nitrate.
SKU: 51343182
Buffer Solution, pH 9,23
Buffer Solution, concentration pH 9,23 ± 0,02, 500 mL.
SKU: S11M011
51350094 Conductivity standard 12.88 mS/cm, 250 ml
Solution for calibration and verification of devices that measure the electrical conductivity of solutions.
SKU: 51350094
51340294 Electrolyte InLab 605, 25 ml bottle
Electrolyte for reference electrodes.
SKU: 51340294
Solution for cleaning pH electrodes from proteins / organic substances, 250 ml
The solution is intended for cleaning the sensitive element of the electrode from contaminants such as proteins and other organic contaminants.
SKU: C20C370
pH Buffer Solution, pH 4.01
pH Buffer Solution, concentration 4.01 ± 0.02 pH, 500 mL.
SKU: 2283449.99
51350074 Electrolyte 3 mol/l KCl saturated AgCl, 250 ml
Solution for filling electrodes Mettler Toledo.
SKU: 51350074
Certified Buffer Standard Solution, pH 1.679
Certified Buffer Standard Solution,1.679 ±0.010 pH at 25°C.
SKU: S11M001
RENOVO.N solution for cleaning pH electrodes, pure water samples, 250 ml
Solution for regular cleaning of the sensitive element of a pH electrode.
SKU: S16M001
51107889 Electrolyte for DX264-Cu electrode
The electrolyte serves to create a stable and well defined electrochemical environment within the DX264-Cu ion selective electrode.
SKU: 51107889
ORP / Redox calibration solution (ZoBell's solution)
Standard solution for calibration and accuracy verification of ORP electrodes.
SKU: 2316949
Recommended products
Buffer Solution, pH 9,23
Buffer Solution, concentration pH 9,23 ± 0,02, 500 mL.
SKU: S11M011
51344754 PerfectION electrolyte E, 5x60 ml
perfectION Mettler Toledo ion selective electrode filling solution for determining potassium concentrations.
SKU: 51344754
Conductivity calibration solution 12.88 mS/cm, KCl, 125 mL
Standard conductivity solution. 12.88 mS/cm ± 0.11 mS/cm @ 25 °C. Potassium chloride (KCl) (0.1 M). Bottle 125 ml.
SKU: LZW9721.99
Filling Solution, Reference, 2,44 M KCl, 59 mL
Filling solution for electrode reference element, Potassium Chloride (KCl), 2,44 M, 59 mL bottle.
SKU: 2965026
Calibration solutions for TDS meters 300 ppm
The solutions are designed to check the accuracy of measurement and calibration of devices in the analysis of conductivity and total salinity (salinity) of water.
SKU: 2974626, 2974649
ISE Ammonia Standard Solution, 1 mg/L, 500 mL
ISE Standard Solution. Ammonia, 1,00 mg/L ±0.03 mg/L NH3-N. 500 mL bottle.
SKU: 189149
HI7041M Electrolyte for Dissolved Oxygen Sensors
The HI7041M electrolyte is designed for Hanna Instruments polarographic dissolved oxygen sensors. The correct filling solution is critical to the performance of your Dissolved Oxygen Sensor.
SKU: HI7041M
51350042 Certified Buffer pH 4.01 6 x 250 ml
pH buffer for electrode calibration. The package contains 6 bottles of 250 ml.
SKU: 51350042
30090860 Ammonium standard solution 100 mg/l
A pre-mixed solution with an accurately known concentration of ammonium (NH4) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090860
