998 (90) 174-57-84
51107889 Electrolyte for DX264-Cu electrode
SKU: 51107889
Manufacturer: Mettler Toledo
Availability: Order only
Electrolyte (electrode filling solution) 51107889 Mettler Toledo, designed for the DX264-Cu ion selective electrode, which is sensitive to copper ions in solutions. Volume 20 ml.
The right electrolyte ensures long-term stability and maximum electrode performance.
Recommended products
Recommended products
51344752 PerfectION electrolyte С, 5x60 ml
perfectION Mettler Toledo ion selective electrode filling solution for determining Silver concentrations.
SKU: 51344752
Compare
51350064 ORP buffer 468 mV/pH 0.1; package 6 x 30 ml
Standard solution for calibrating and checking the accuracy of ORP electrodes.
SKU: 51350064
Buffer Solution, pH 10,01
Buffer Solution, concentration pH 10,01 ± 0,02, 500 mL.
SKU: 1222149
Chloride Ionic Strength Adjustor (ISA) Powder Pillows, pk/100
Chloride Ionic Strength Adjustor (ISA) for Chloride determinations by Ion Selective Electrode (ISE) method. Ideal for low Chloride level readings. Pack of 100 powder pillows.
SKU: 2318069
51302070 Buffer pH 9.21 in sachets 30x20 ml
Disposable pH buffer sachets from Mettler Toledo. The solution is poured into the package under controlled conditions, ensuring a fresh and clean solution for every pH electrode calibration.
SKU: 51302070
ISE standard solution, Fluoride (F-) concentration 10 mg/l; volume 500 ml
Standard Fluoride Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 35949
30095315 All-in-One Kit 2 6x250 ml
The kit contains 250 ml vials with the following components: technical buffers pH 4.01, pH 7.00, pH 10.00, 3 mol/L KCl electrolyte, cleaning solution (pepsin) and InLab storage solution.
SKU: 30095315
Buffer Solution, pH 7,00
Buffer Solution, concentration pH 7,00± 0,02, 500 mL.
SKU: 1222249
Calibration solutions for TDS meters 1000 ppm
A solution of Na2SO4, Na2CO3, NaCl for checking the accuracy of instruments when measuring conductivity and total dissolved solids (salt content) of water.
SKU: 2974726, 2974749
51107891 Electrolyte for DX312-Cd electrode
The electrolyte serves to create a stable and well defined electrochemical environment within the DX312-Cd ion selective electrode.
SKU: 51107891
Buffer solution pH 4.01, 125 mL
Calibration solution with standard pH value for pH meters and electrodes.
SKU: LZW9460.99
51300140 Tablets for preparing solutions with zero dissolved oxygen content
These tablets make it easy to prepare a zero dissolved oxygen solution. The resulting solution is then used to calibrate and verify accuracy when measuring low dissolved oxygen concentrations.
SKU: 51300140
Solution for cleaning pH electrodes from proteins / organic substances, 250 ml
The solution is intended for cleaning the sensitive element of the electrode from contaminants such as proteins and other organic contaminants.
SKU: C20C370
Conductivity calibration solution 100 μS/cm, NaCl, 50 ml
Standard conductivity solution for calibrating TDS meters (salinometers) and conductivity meters.
SKU: 2971826
HI770710P pH 7.01 and 10.01 Buffer Sachets (Kit)
Set of calibration buffer solutions pH 7.01 and 10.01 +/- 0.01 pH at 25°C.
SKU: HI770710P
30111135 Buffer pH 11.00 in sachets 30x20 ml
Disposable pH buffer sachets from Mettler Toledo. The solution is poured into the package under controlled conditions, ensuring a fresh and clean solution for every pH electrode calibration.
SKU: 30111135
30090856 Calcium standard solution 10 mg/l Ca
A pre-mixed solution with an accurately known concentration of calcium (Ca) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090856
Certified Buffer Standard Solution, pH 12,45
Certified Buffer Standard Solution, pH 12,45 ±0,05 pH at 25°C, 500 mL.
SKU: S11M008
HI70300L pH electrode storage solution (500 ml)
HI70300L is an electrode storage solution formulated with chemicals that can be used to keep your pH and ORP electrodes performing optimally. When the pH electrode is stored properly in solution, the glass membrane is well hydrated, which ensures proper functioning and accurate readings.
SKU: HI70300L
51350092 Conductivity standard 1413 µS/cm, 250 ml
Solution for calibration and verification of devices that measure the electrical conductivity of solutions.
SKU: 51350092
Powder Pillows buffer pH 10.01 (blue), 15 pcs
Sealed bags with powder for pH electrode calibration.
SKU: 2227195
ISE standard solution, nitrate (NO3-N) concentration 100 mg/l; volume 500 ml
Standard Nitrate Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 194749
Ammonium Ionic Strength Adjustor (ISA) Powder Pillows, pk/100
Ionic Strength Adjustor (ISA) for Ammonium determinations by Ion Selective Electrode (ISE) method. Powder form prevent from diluting samples. Ideal for low Ammonium level readings. Eliminate most interferences. Pack of 100 powder pillows.
SKU: 2980699
51340035 Electrolyte for DX218-NH4, 20 ml
Solution for filling the DX218-NH4 electrode.
SKU: 51340035
Recommended products
HI700663P Cleaning Solution for Soil Deposits (25 x 20 mL Sachets)
Cleaning solution for electrodes in easy-to-use sachets.
SKU: HI700663P
ISE standard solution, nitrate (NO3-N) concentration 1000 mg/l; volume 500 ml
Standard Nitrate Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 1279249
Certified Buffer Standard Solution, pH 7,413
Certified Buffer Standard Solution, pH 7,413 ±0.010 pH at 25°C, 500 mL.
SKU: S11M005
30090847 Standard solution conductivity 1.3 µs/cm
Mettler Toledo 30090847 Conductivity Standard is a high quality reference solution with a known and accurate conductivity value. Used to calibrate and test the performance of meters (conductivity meters) and conductivity sensors.
SKU: 30090847
51344750 PerfectION electrolyte A, 5x60 ml
perfectION Mettler Toledo ion selective electrode filling solution for determining calcium, fluoride or sulfide concentrations.
SKU: 51344750
Certified Buffer Standard Solution, pH 4,005
Certified Buffer Standard Solution, pH 4.005 ±0.010 pH at 25°C, 500 mL.
SKU: S11M002
51350076 FRISCOLYT B electrolyte, 250 ml
Electrolyte for filling electrodes.
SKU: 51350076
pH buffer 7.00 (yellow) Powder Pillows 15 pcs.
Powdered pH buffer; 15 individual sealed bags with buffer for pH calibration of electrodes.
SKU: 2227095
HI70007P pH 7.01 Calibration Solution, 25 x 20 ml sachets
Buffer solution with a pH value of 7.01 for calibrating pH meters and electrodes. The package contains 25 sachets with 20 ml of solution.
SKU: HI70007P
