998 (90) 174-57-84
Dissolved oxygen sensors
Filters
Sorting:
SKU: 114.000
Compare
Laboratory dissolved oxygen sensor LDO101, cable 1 m, 3 m
Intellical LDO101 - a digital luminescent / optical sensor of dissolved oxygen (LDO technology).
SKU: LDO10101, LDO10103
Field dissolved oxygen sensor LDO101, cable 5, 10, 15, 30 m
Intellical LDO101 is a digital luminescent / optical dissolved oxygen sensor (LDO technology). Luminescence based LDO technology - no electrolyte change required, no interference due to deposits or hydrogen sulfide.
SKU: LDO10105, LDO10110
Orbisphere K1200 Oxygen Sensor for nuclear applications, 0 - 2000 ppb
Maintenance-free optical sensor for analysis and monitoring of dissolved oxygen in nuclear power plants.
SKU: K1200-S00
Orbisphere M1100 inline oxygen sensor, 0 - 40 ppm, fitting 28 mm
Used in conjunction with Orbisphere controllers.
SKU: M1100-S00H
Replacement cap OEC30-PSt7-YAU with oxygen sensor for OXYPro WR and WRM probes
Thanks to the design of the cap, this model of the sensor reduces the formation of air bubbles during the measurement of dissolved oxygen.
SKU: OEC30-PSt7-YAU
LDO 2 sc dissolved oxygen process sensor for seawater, cable 10 m
Hach LDO® Model 2 Probe with Luminescent Dissolved Oxygen Technology for seawater.
SKU: LXV416.99.20S01
Oxygen sensors WR, WRM and WR-ECS OXYPro series
Probe for measuring dissolved and gaseous oxygen.
SKU: WR, WRM, WR-ECS
Self-adhesive optical point SP-PSt3-SA for oxygen sensor PreSens
Optical point SP-PSt3-SA for non-invasive online monitoring of oxygen in the dissolved or gaseous phase in the range of 0 - 100%, 0 - 45 mg/l.
SKU: SP-PSt3-SA
Replacement cap OEC30-PSt7-NAU-OIW with oxygen sensor for OXYPro WR and WRM probes
The wide range PSt7 sensor is built into a beveled stainless steel cap. The design reduces the formation of air bubbles on the sensor with a very fast response time (< 3 sec.).
SKU: OEC30-PSt7-NAU-OIW
Optical point SP-PSt7-NAU for oxygen sensor PreSens
Optical points SP-PSt7-NAU and SP-PSt7-YAU for PreSens oxygen sensors allow O2 measurements from 0 to 100% with a detection limit of 0.03%. SP-PSt7-NAU - not autoclavable. SP-PSt7-YAU - autoclavable.
SKU: SP-PSt7-NAU, SP-PSt7-YAU
LDO sc process dissolved oxygen sensor; cable 10 meters
LDO Process Dissolved Oxygen Sensor for SC Series Online Controllers. Available with 10 meter cable.
SKU: LXV416.99.20001
Optical point SP-PSt8-NAU for oxygen sensor PreSens
Optical points SP-PSt8-NAU and SP-PSt8-YAU for PreSens oxygen sensors allow O2 measurement in the range from 0 to 10%, detection limit - 0.007%. SP-PSt8-NAU - not autoclavable. SP-PSt8-YAU - autoclavable.
SKU: SP-PSt8-NAU, SP-PSt8-YAU
Optical point SP-PSt3-NAU for oxygen sensor PreSens
The optical point is the most versatile version of the non-invasive optical oxygen sensors. SP-PSt3-NAU has a measuring range from 0 to 100% oxygen in dissolved or gas phase
SKU: SP-PSt3-NAU
OXY-2GO Portable O2 Analyzer for Beer by Haffmans Pentair
The Pentair Haffmans Oxy-2Go is a portable analyzer designed specifically for small breweries that require an economical and reliable solution for monitoring dissolved oxygen (DO). It provides accurate measurement of the full range of oxygen in wort, beer and other carbonated beverages using proven Pentair Haffmans optical technology.
SKU: OXY-2GO
Optical point SP-PSt6-YAU for oxygen sensor PreSens
The optical point is the most versatile version of optical oxygen sensors. Dissolved and gaseous oxygen is measured in a non-contact way through the transparent wall of the container. SP-PSt6-YAU has a measuring range of 0 to 5% oxygen in dissolved or gas phase.
SKU: SP-PSt6-YAU
SKU: 51344611
Oxygen sensitive PET bottle cap OSC-PSt3
The oxygen sensitive PET bottle cap PreSens OSC-PSt3 is designed to measure oxygen penetration into opaque bottles in the range of 0 - 100% O2, 0 - 1000 hPa / 0 - 45 mg/L, 0 - 1400 μmol/L.
SKU: OSC-PSt3
SKU: HI7040L
Orbisphere K1200 Oxygen Sensor for nuclear applications, 0 - 40 ppm
Maintenance-free optical sensor for analysis and monitoring of dissolved oxygen in nuclear power plants.
SKU: K1200-S00H
Oxygen Probe for In-Line Measurement OIM-PSt3
PreSens OIM-PSt3 is designed for process control and provides accurate and stable O2 measurements in the 0-100% / 0-45 mg / L range, with a detection limit of 0.03% / 15 ppb.
SKU: OIM-PSt3
SKU: OXI
Oxygen Probe for In-Line Measurement OIM-PSt6
PreSens OIM-PSt6 is designed for process control and provides accurate and stable O2 measurements in the 0-5% / 0-2 mg/L range, with a detection limit of 0.002% / 1 ppb.
SKU: OIM-PSt6
SKU: OptiOx
Sorting:
SKU: 114.000
Laboratory dissolved oxygen sensor LDO101, cable 1 m, 3 m
Intellical LDO101 - a digital luminescent / optical sensor of dissolved oxygen (LDO technology).
SKU: LDO10101, LDO10103
Field dissolved oxygen sensor LDO101, cable 5, 10, 15, 30 m
Intellical LDO101 is a digital luminescent / optical dissolved oxygen sensor (LDO technology). Luminescence based LDO technology - no electrolyte change required, no interference due to deposits or hydrogen sulfide.
SKU: LDO10105, LDO10110
Orbisphere K1200 Oxygen Sensor for nuclear applications, 0 - 2000 ppb
Maintenance-free optical sensor for analysis and monitoring of dissolved oxygen in nuclear power plants.
SKU: K1200-S00
Orbisphere M1100 inline oxygen sensor, 0 - 40 ppm, fitting 28 mm
Used in conjunction with Orbisphere controllers.
SKU: M1100-S00H
Replacement cap OEC30-PSt7-YAU with oxygen sensor for OXYPro WR and WRM probes
Thanks to the design of the cap, this model of the sensor reduces the formation of air bubbles during the measurement of dissolved oxygen.
SKU: OEC30-PSt7-YAU
LDO 2 sc dissolved oxygen process sensor for seawater, cable 10 m
Hach LDO® Model 2 Probe with Luminescent Dissolved Oxygen Technology for seawater.
SKU: LXV416.99.20S01
Oxygen sensors WR, WRM and WR-ECS OXYPro series
Probe for measuring dissolved and gaseous oxygen.
SKU: WR, WRM, WR-ECS
Self-adhesive optical point SP-PSt3-SA for oxygen sensor PreSens
Optical point SP-PSt3-SA for non-invasive online monitoring of oxygen in the dissolved or gaseous phase in the range of 0 - 100%, 0 - 45 mg/l.
SKU: SP-PSt3-SA
Replacement cap OEC30-PSt7-NAU-OIW with oxygen sensor for OXYPro WR and WRM probes
The wide range PSt7 sensor is built into a beveled stainless steel cap. The design reduces the formation of air bubbles on the sensor with a very fast response time (< 3 sec.).
SKU: OEC30-PSt7-NAU-OIW
Optical point SP-PSt7-NAU for oxygen sensor PreSens
Optical points SP-PSt7-NAU and SP-PSt7-YAU for PreSens oxygen sensors allow O2 measurements from 0 to 100% with a detection limit of 0.03%. SP-PSt7-NAU - not autoclavable. SP-PSt7-YAU - autoclavable.
SKU: SP-PSt7-NAU, SP-PSt7-YAU
LDO sc process dissolved oxygen sensor; cable 10 meters
LDO Process Dissolved Oxygen Sensor for SC Series Online Controllers. Available with 10 meter cable.
SKU: LXV416.99.20001
Optical point SP-PSt8-NAU for oxygen sensor PreSens
Optical points SP-PSt8-NAU and SP-PSt8-YAU for PreSens oxygen sensors allow O2 measurement in the range from 0 to 10%, detection limit - 0.007%. SP-PSt8-NAU - not autoclavable. SP-PSt8-YAU - autoclavable.
SKU: SP-PSt8-NAU, SP-PSt8-YAU
Optical point SP-PSt3-NAU for oxygen sensor PreSens
The optical point is the most versatile version of the non-invasive optical oxygen sensors. SP-PSt3-NAU has a measuring range from 0 to 100% oxygen in dissolved or gas phase
SKU: SP-PSt3-NAU
OXY-2GO Portable O2 Analyzer for Beer by Haffmans Pentair
The Pentair Haffmans Oxy-2Go is a portable analyzer designed specifically for small breweries that require an economical and reliable solution for monitoring dissolved oxygen (DO). It provides accurate measurement of the full range of oxygen in wort, beer and other carbonated beverages using proven Pentair Haffmans optical technology.
SKU: OXY-2GO
Optical point SP-PSt6-YAU for oxygen sensor PreSens
The optical point is the most versatile version of optical oxygen sensors. Dissolved and gaseous oxygen is measured in a non-contact way through the transparent wall of the container. SP-PSt6-YAU has a measuring range of 0 to 5% oxygen in dissolved or gas phase.
SKU: SP-PSt6-YAU
SKU: 51344611
Oxygen sensitive PET bottle cap OSC-PSt3
The oxygen sensitive PET bottle cap PreSens OSC-PSt3 is designed to measure oxygen penetration into opaque bottles in the range of 0 - 100% O2, 0 - 1000 hPa / 0 - 45 mg/L, 0 - 1400 μmol/L.
SKU: OSC-PSt3
SKU: HI7040L
Orbisphere K1200 Oxygen Sensor for nuclear applications, 0 - 40 ppm
Maintenance-free optical sensor for analysis and monitoring of dissolved oxygen in nuclear power plants.
SKU: K1200-S00H
Oxygen Probe for In-Line Measurement OIM-PSt3
PreSens OIM-PSt3 is designed for process control and provides accurate and stable O2 measurements in the 0-100% / 0-45 mg / L range, with a detection limit of 0.03% / 15 ppb.
SKU: OIM-PSt3
SKU: OXI
Oxygen Probe for In-Line Measurement OIM-PSt6
PreSens OIM-PSt6 is designed for process control and provides accurate and stable O2 measurements in the 0-5% / 0-2 mg/L range, with a detection limit of 0.002% / 1 ppb.
SKU: OIM-PSt6
SKU: OptiOx