+7 (495) 201-53-02
Orbisphere C1100 ozone sensor
SKU: C1100-S00
Manufacturer: Orbisphere
Availability: Order only
Orbisphere C1100 Series Ozone Sensors:
- C1100-T00 - Orbisphere C1100 ozone sensor, titanium, up to 100 bar;
- C1100-S0S - Orbisphere C1100 ozone sensor, stainless steel, up to 100 bar;
- C1100-S00 - Orbisphere C1100 ozone sensor, stainless steel, up to 40 bar;
The sensor comes with a plastic screw cap to store and protect its head. The plastic base is designed to protect the connection socket and can serve as a suitable support for the sensor during maintenance procedures or when it is not in use.
Description Specifications Recommended products
Description
Description
The principle of operation of ozone sensors of the C1100 series
The Orbisphere C1100 sensors are designed to measure the ozone content in ultra-pure water circuits or during the disinfection phase of any beverage production line. This unique sensor does not require special settings or experienced operators to work on the line.
In its simplest form, the electrochemical sensor consists of one central electrode (cathode) and one counter electrode (anode) immersed in an electrolyte solution that is separated from the liquid sample by a gas-permeable membrane. The electronic circuit is connected to the anode and cathode. A current will flow through the applied voltage between the anode and the cathode.
A protective ring surrounds the central electrode to reduce the effect of other gases and therefore improve the stability of the analysis. The sensor head is closed with a protective cap to protect the membrane.
Ozone, penetrating through the membrane into the cell, reacts with the electrolyte, which then reacts at the cathode, causing a measurable electric current. This current is proportional to the amount of gas entering the cell, which in turn is proportional to the partial pressure of the gas in the sample outside the cell.
The result is displayed as a gas concentration, which can then be displayed with a choice of several units of measurement according to the instrument settings.
Intelligent touch technology is implemented using the RS485 interface.
The sensor electronics perform four functions:
- Applies a constant voltage to the anode
- Measures the current flowing through the sensor
- Compensates for temperature fluctuations of the liquid sample
- Converts the electrical current of the cell to an analog signal for the output of the sensor
Specifications
| Application area | Beverages |
| Type | Industrial |
| Industry | Food and Beverage |
| Parameters | Ozone |
| Measurement Range | 0 ppb - 50 ppm O3 |
Recommended products
Thermal Conductivity (TC) Hydrogen Sensors Orbisphere
Control the precise hydrogen content in the power generation process.
SKU: 31290TC
Compare1200-S sc digital online ORP sensor for SC series controllers
Hach offers a wide range of analog and digital pH and ORP sensors to meet your in-line pH or ORP monitoring needs in water or other liquids.
SKU: LXV426.99.20001
1200-S sc Digital pH sensor for SC controller
Hach offers a wide range of analog and digital pH and ORP sensors to meet your in-line pH or ORP monitoring needs in water or other liquids.
SKU: LXV426.99.10001
3798-S sc Digital inductive conductivity sensor, 10 m cable
Immersion conductivity probe with built-in electronics, for operation with the SC controller.
SKU: LXV428.99.00001
Orbisphere CO2 Carbon Dioxide Sensor
Carbon dioxide sensor with nitrogen purge and protective cap. With adapter for external temperature sensor.
SKU: 31490TC
N-ISE sc immersion nitrate probe
Process ion-selective sensor Hach Lange for determining the concentration of nitrates 0 - 1000 mg/l NO3-N in wastewater.
SKU: LXV440.99.20001, LXV440.99.20011
9185 sc Amperometric Ozone Analyzer
The 9185 sc from Hach is a single-channel, online industrial sensor that measures ozone in drinking water treatment plants, distribution networks and other applications where ppm and ppb ozone monitoring is required. This instrument uses an amperometric method to measure the concentration of ozone. The membrane allows selective diffusion of ozone molecules to the amperometric sensor. Suitable for use in water with low conductivity.
SKU: LXV433.99.00001
52003548 pH electrode InPro4260/SG/225/PT1000
The InPro 4260 SG is an analog in-line combined pH and ORP sensor with an integrated temperature sensor for use in chemical environments.
SKU: 52003548
A-ISE sc NH4-N Immersion Ion Selective Probe
The digital ion selective probe A-ISE sc Hach is designed to determine the concentration of ammonium directly in the medium. No calibration required. Automatic potassium compensation. The sensor is easy to handle. Low maintenance thanks to the cartridge system. The A-ISE sc is particularly economical in terms of installation and operation, even in small wastewater treatment plants.
SKU: LXV440.99.10001, LXV440.99.10011
AN-ISE sc immersion ammonium and nitrate ion-selective probe
The Hach AN-ISE sc digital combination ammonium and nitrate sensor performs continuous direct measurements using an ion selective electrode. No reagents or sample preparation required. Automatic and simultaneous potassium and chloride compensation. Easy handling and low maintenance thanks to the Cartrical plus sensor cartridge with five electrodes.
SKU: LXV440.99.00001
Electrochemical hydrogen sensor H2, stainless steel, up to 100 bar
The Orbisphere H2 sensor monitors hydrogen during power generation. The EC sensor is made of stainless steel with an EPDM O-ring.
SKU: 31230.01
Orbisphere stainless steel oxygen sensor, 100 bar
Electrochemical sensor for in-line O2 monitoring.
SKU: 31130.01
Orbisphere stainless steel oxygen sensor, 50 bar
Electrochemical sensor for in-line O2 monitoring.
SKU: 31120.01
Orbisphere GA2400 Series Oxygen Sensor, 100 Bar
Electrochemical industrial oxygen sensor. Used in conjunction with Orbisphere controllers.
SKU: GA2400-S0S
Thermal Conductivity (TC) N2 Probes Orbisphere
Selective nitrogen measurement.
SKU: 31590TC
Recommended products
Orbisphere GA2400 Series Oxygen Sensor, 100 Bar
Electrochemical industrial oxygen sensor. Used in conjunction with Orbisphere controllers.
SKU: GA2400-S0S
Thermal Conductivity (TC) Hydrogen Sensors Orbisphere
Control the precise hydrogen content in the power generation process.
SKU: 31290TC
Orbisphere stainless steel oxygen sensor, 50 bar
Electrochemical sensor for in-line O2 monitoring.
SKU: 31120.01
Orbisphere CO2 Carbon Dioxide Sensor
Carbon dioxide sensor with nitrogen purge and protective cap. With adapter for external temperature sensor.
SKU: 31490TC
Orbisphere stainless steel oxygen sensor, 100 bar
Electrochemical sensor for in-line O2 monitoring.
SKU: 31130.01
52003548 pH electrode InPro4260/SG/225/PT1000
The InPro 4260 SG is an analog in-line combined pH and ORP sensor with an integrated temperature sensor for use in chemical environments.
SKU: 52003548
1200-S sc digital online ORP sensor for SC series controllers
Hach offers a wide range of analog and digital pH and ORP sensors to meet your in-line pH or ORP monitoring needs in water or other liquids.
SKU: LXV426.99.20001
3798-S sc Digital inductive conductivity sensor, 10 m cable
Immersion conductivity probe with built-in electronics, for operation with the SC controller.
SKU: LXV428.99.00001
Thermal Conductivity (TC) N2 Probes Orbisphere
Selective nitrogen measurement.
SKU: 31590TC
