52003548 pH electrode InPro4260/SG/225/PT1000
SKU: 52003548
Manufacturer: Mettler Toledo
Availability: In stock
The InPro 4260 SG from Mettler Toledo is an analog in-line combined pH/ORP electrode with a built-in PT 1000 temperature sensor. Works directly in the process. This pH electrode is designed for use in chemical environments.
The InPro 4260 SG provides a wide range of pH measurements from 0 to 14, redox potential (ORP) measurement, and improved stability.
Description Specifications Recommended products
Description
Description
The InPro 4260 SG electrode is equipped with an open-junction Argenthal reference system and Xerolyt® Extra polymer electrolyte. All this contributes to the absence of clogging of the sensor and ensures its resistance to poisoning, solvents, strongly acidic or alkaline environments.
This sensor is easy to integrate into your process. Its IP68 waterproof connector ensures reliable measurements even in humid environments.
The sensor is ATEX and FM certified for hazardous areas. It can withstand operating temperatures up to 130 °C and pressures up to 15 bar (depending on temperature).
Electrode calibration
Before calibration, soak the electrode connected to the transmitter for 10 minutes in a pH 7.00 or pH 4.01 buffer solution. A two-point calibration is recommended, eg pH 7.00 and pH 4.01 buffer solutions.
Specifications
- pH Measurement Technology Highly alkali-resistant glass membrane
- pH range 0 - 14
- Reference system Xerolyt Extra polymer electrolyte, open double junction, Argenthal cartridge with silver-ion trap
- Operating temperature 0 - 130 °C
- Cable connector VP
- Process connection thread Pg 13.5
- Sterilizable/Autoclavable No
- Sensor length 225 mm
- Operating pressure (bar) 0 to 15 barg at 25°C; 0 to 7 bar at 130°C
- Temperature sensor PT 1000
- Shaft Material Glass
Specifications
Application area | Process control |
Type | Industrial |
Industry | Chemical |
Parameters | ORP (redox potential), pH |
Measurement Range | 0 - 14 pH |
Recommended products
9185 sc Amperometric Ozone Analyzer
The 9185 sc from Hach is a single-channel, online industrial sensor that measures ozone in drinking water treatment plants, distribution networks and other applications where ppm and ppb ozone monitoring is required. This instrument uses an amperometric method to measure the concentration of ozone. The membrane allows selective diffusion of ozone molecules to the amperometric sensor. Suitable for use in water with low conductivity.
SKU: LXV433.99.00001
Electrochemical hydrogen sensor H2, stainless steel, up to 100 bar
The Orbisphere H2 sensor monitors hydrogen during power generation. The EC sensor is made of stainless steel with an EPDM O-ring.
SKU: 31230.01
Orbisphere GA2400 Series Oxygen Sensor, 100 Bar
Electrochemical industrial oxygen sensor. Used in conjunction with Orbisphere controllers.
SKU: GA2400-S0S
N-ISE sc immersion nitrate probe
Process ion-selective sensor Hach Lange for determining the concentration of nitrates 0 - 1000 mg/l NO3-N in wastewater.
SKU: LXV440.99.20001, LXV440.99.20011
Orbisphere stainless steel oxygen sensor, 50 bar
Electrochemical sensor for in-line O2 monitoring.
SKU: 31120.01
Thermal Conductivity (TC) Hydrogen Sensors Orbisphere
Control the precise hydrogen content in the power generation process.
SKU: 31290TC
AN-ISE sc immersion ammonium and nitrate ion-selective probe
The Hach AN-ISE sc digital combination ammonium and nitrate sensor performs continuous direct measurements using an ion selective electrode. No reagents or sample preparation required. Automatic and simultaneous potassium and chloride compensation. Easy handling and low maintenance thanks to the Cartrical plus sensor cartridge with five electrodes.
SKU: LXV440.99.00001
Orbisphere C1100 ozone sensor
Electrochemical ozone sensor, measuring range 0 ppb - 50 ppm O3.
SKU: C1100-S00
Orbisphere stainless steel oxygen sensor, 100 bar
Electrochemical sensor for in-line O2 monitoring.
SKU: 31130.01
Thermal Conductivity (TC) N2 Probes Orbisphere
Selective nitrogen measurement.
SKU: 31590TC
1200-S sc Digital pH sensor for SC controller
Hach offers a wide range of analog and digital pH and ORP sensors to meet your in-line pH or ORP monitoring needs in water or other liquids.
SKU: LXV426.99.10001
3798-S sc Digital inductive conductivity sensor, 10 m cable
Immersion conductivity probe with built-in electronics, for operation with the SC controller.
SKU: LXV428.99.00001
A-ISE sc NH4-N Immersion Ion Selective Probe
The digital ion selective probe A-ISE sc Hach is designed to determine the concentration of ammonium directly in the medium. No calibration required. Automatic potassium compensation. The sensor is easy to handle. Low maintenance thanks to the cartridge system. The A-ISE sc is particularly economical in terms of installation and operation, even in small wastewater treatment plants.
SKU: LXV440.99.10001, LXV440.99.10011
Orbisphere CO2 Carbon Dioxide Sensor
Carbon dioxide sensor with nitrogen purge and protective cap. With adapter for external temperature sensor.
SKU: 31490TC
1200-S sc digital online ORP sensor for SC series controllers
Hach offers a wide range of analog and digital pH and ORP sensors to meet your in-line pH or ORP monitoring needs in water or other liquids.
SKU: LXV426.99.20001
Recommended products
Thermal Conductivity (TC) Hydrogen Sensors Orbisphere
Control the precise hydrogen content in the power generation process.
SKU: 31290TC
1200-S sc digital online ORP sensor for SC series controllers
Hach offers a wide range of analog and digital pH and ORP sensors to meet your in-line pH or ORP monitoring needs in water or other liquids.
SKU: LXV426.99.20001
A-ISE sc NH4-N Immersion Ion Selective Probe
The digital ion selective probe A-ISE sc Hach is designed to determine the concentration of ammonium directly in the medium. No calibration required. Automatic potassium compensation. The sensor is easy to handle. Low maintenance thanks to the cartridge system. The A-ISE sc is particularly economical in terms of installation and operation, even in small wastewater treatment plants.
SKU: LXV440.99.10001, LXV440.99.10011
Thermal Conductivity (TC) N2 Probes Orbisphere
Selective nitrogen measurement.
SKU: 31590TC
Orbisphere stainless steel oxygen sensor, 100 bar
Electrochemical sensor for in-line O2 monitoring.
SKU: 31130.01
9185 sc Amperometric Ozone Analyzer
The 9185 sc from Hach is a single-channel, online industrial sensor that measures ozone in drinking water treatment plants, distribution networks and other applications where ppm and ppb ozone monitoring is required. This instrument uses an amperometric method to measure the concentration of ozone. The membrane allows selective diffusion of ozone molecules to the amperometric sensor. Suitable for use in water with low conductivity.
SKU: LXV433.99.00001
AN-ISE sc immersion ammonium and nitrate ion-selective probe
The Hach AN-ISE sc digital combination ammonium and nitrate sensor performs continuous direct measurements using an ion selective electrode. No reagents or sample preparation required. Automatic and simultaneous potassium and chloride compensation. Easy handling and low maintenance thanks to the Cartrical plus sensor cartridge with five electrodes.
SKU: LXV440.99.00001
Orbisphere CO2 Carbon Dioxide Sensor
Carbon dioxide sensor with nitrogen purge and protective cap. With adapter for external temperature sensor.
SKU: 31490TC
3798-S sc Digital inductive conductivity sensor, 10 m cable
Immersion conductivity probe with built-in electronics, for operation with the SC controller.
SKU: LXV428.99.00001