998 (90) 174-57-84
51107872 Electrolyte for DX258-SCN ISE electrode, 20 ml
SKU: 51107872
Manufacturer: Mettler Toledo
Availability: Order only
Electrolyte 51107872 Mettler Toledo is designed to provide stable operation of the DX258-SCN ion selective electrode and accurate measurements of Thiocyanate ion concentration in solutions. The volume of the bottle is 20 ml.
The solution also serves to protect the sensitive membrane from contaminants that may change the characteristics of the ion or interfere with its reaction with the membrane.
The right electrolyte ensures the long-term stability of the electrode, which is important for repeatable and accurate measurements.
Recommended products
Recommended products
Certified Buffer Standard Solution, pH 10,012
Certified Buffer Standard Solution, pH 10,012 ±0.010 pH at 25°C, 500 mL.
SKU: S11M007
Compare
ISE standard solution, nitrate (NO3-N) concentration 1000 mg/l; volume 500 ml
Standard Nitrate Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 1279249
30111142 InLab Electrode Storage Solution
Solution for storage of electrodes.
SKU: 30111142
51350092 Conductivity standard 1413 µS/cm, 250 ml
Solution for calibration and verification of devices that measure the electrical conductivity of solutions.
SKU: 51350092
HI6010 Calibration solution pH 10.010 ± 0.002 at 25°C
HI6010 is a pH 10.010 +/- 0.002 pH calibration buffer.
SKU: HI6010
30095314 All-in-One Kit 1 6x250 ml
The kit contains 250 ml vials with the following components: technical buffers pH pH 4.01, pH 7.00, pH 9.21, 3 mol/L KCl electrolyte, cleaning solution (pepsin) and InLab storage solution.
SKU: 30095314
KCl calibration solution for conductivity meters 1412 μS/cm
Calibration solutions are designed to adjust the measurement accuracy of instruments when measuring the electrical conductivity of water.
SKU: 2974326, 2974349
Buffer Solution, pH 10,01
Buffer Solution, concentration pH 10,01 ± 0,02, 500 mL.
SKU: 1222149
Singlet Single-Use pH Buffer, pH 4,01
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is 4,01 ±0.02 at 25°C. Pack of 20 of pH 4,01 pH, 20 mL each.
SKU: 2770020
51107875 Electrolyte for DX407-Pb electrode
The electrolyte serves to create a stable and well defined electrochemical environment within the DX407-Pb ion selective electrode.
SKU: 51107875
Calibration solutions for TDS meters 3000 ppm
A solution of Na2SO4, Na2CO3, NaCl for calibrating conductivity meters and the total dissolved solids (salinity) of water.
SKU: 2974826, 2974849
Calibration solution for conductivity meter 1413 µS/cm, KCl, 125 mL
1413 μS/cm conductivity reference solution for calibrating the conductivity meter / cell and verifying the accuracy of the analysis performed.
SKU: LZW9711.99
Conductivity Standard Solution, 146,9 µS/cm
Calibration solution, concentration 146.9 μS/cm ± 2.5% at 25 °C / 0.001M KCl, 500 ml.
SKU: C20C280
51344763 PerfectION nitrate ISA, 475 ml
Ionic strength adjuster for obtaining accurate readings from an ion-selective electrode that determines the concentration of nitrate.
SKU: 51344763
NaCl solution for conductivity meter calibration 1990 μS/cm, 100 mL
Standard solution for tds and conductivity meters.
SKU: 210542
30090851 Standard solution 100 mg/l (fluoride)
The standard fluoride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of fluoride ions (F). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of fluoride ions in the sample.
SKU: 30090851
51300170 Standard solution conductivity 500 µs/cm
Mettler Toledo 51300170 Conductivity Standard is a high quality reference solution with a known and accurate conductivity value. Used to calibrate and test the performance of meters (conductivity meters) and conductivity sensors.
SKU: 51300170
51350062 ORP buffer 220 mV/pH7, 6 x 250mL
ORP buffer is a standard solution used to test the accuracy of ORP sensors (RedOX).
SKU: 51350062
HI70039P Conductivity Standard 5000 µS/cm (25 x 20 ml sachets)
HI70039P is a premium solution with a conductivity of 5000 µS/cm that complies with NIST standards and comes in convenient disposable sachets.
SKU: HI70039P
51350072 Electrolyte KCl 3M, 250 ml bottle
Electrolyte for filling electrodes.
SKU: 51350072
Calibration solutions for TDS meters 300 ppm
The solutions are designed to check the accuracy of measurement and calibration of devices in the analysis of conductivity and total salinity (salinity) of water.
SKU: 2974626, 2974649
51344772 Standard solution 1000 mg/l (chloride)
The standard chloride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of chloride ions (Cl⁻). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of chloride ions in the sample.
SKU: 51344772
30464189 Calibration solution pH 8.00
Technical buffer solution pH 8.00 ± 0.02
SKU: 30464189
30464188 pH 5.00 technical buffer solution
Buffer solution with a pH value of 5.00 ± 0.02 for calibrating pH electrodes.
SKU: 30464188
Recommended products
Powder Pillows buffer pH 10.01 (blue), 15 pcs
Sealed bags with powder for pH electrode calibration.
SKU: 2227195
30090847 Standard solution conductivity 1.3 µs/cm
Mettler Toledo 30090847 Conductivity Standard is a high quality reference solution with a known and accurate conductivity value. Used to calibrate and test the performance of meters (conductivity meters) and conductivity sensors.
SKU: 30090847
51350108 Ionic Strength Adjustor 0.9 mol/L Al2(SO4)3, 250 ml
Accurate ion determination requires the correct solution (ISA) to adjust ionic strength. This solution is used in determining the concentration of nitrate, fluoroborate, lithium, ammonium and potassium ions.
SKU: 51350108
51350016 Buffer pH 2.00, 6 x 250 ml
Technical buffer solution pH 2.00 ± 0.02. The package contains 6 bottles of 250 ml.
SKU: 51350016
51350010 Buffer pH 10.00, 250 ml
Technical buffer solution for calibration of ph meters and electrodes.
SKU: 51350010
Calibration solution ph 7.00, 250 mL
Buffer solution for calibration and accuracy check of pH electrodes and hydrogen ion meters, pH is 7.00 ± 0.02 pH at 25 °C
SKU: LZW9464.98
Calibration solution for conductivity meter 1413 µS/cm, KCl, 125 mL
1413 μS/cm conductivity reference solution for calibrating the conductivity meter / cell and verifying the accuracy of the analysis performed.
SKU: LZW9711.99
Solution 12.88 mS/cm, KCl, 250 mL for conductivity meter calibration
Standard conductivity solution. 12.88 mS/cm ± 0.11 mS/cm @ 25 °C. Potassium chloride (KCl) (0.1 M). Bottle 250 ml.
SKU: LZW9720.99
51344775 Standard solution 1000 mg/l (fluoride)
The standard fluoride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of fluoride ions (F). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of fluoride ions in the sample.
SKU: 51344775
