998 (90) 174-57-84
51350086 Electrolyte KNO3 1M; 6 x 250 ml
SKU: 51350086
Manufacturer: Mettler Toledo
Availability: Order only
Solution 51350086 is recommended for use with Mettler Toledo DX Series electrodes for the determination of ammonium, potassium and nitrate.
Concentration 1 mol/l KNO3.
Volume 6 x 250 ml
Specifications Recommended products
Specifications
Specifications
| Type | Filling solution |
Recommended products
HI6010 Calibration solution pH 10.010 ± 0.002 at 25°C
HI6010 is a pH 10.010 +/- 0.002 pH calibration buffer.
SKU: HI6010
Compare
30090855 Calcium standard solution 100 mg/l
A pre-mixed solution with an accurately known concentration of calcium (Ca) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090855
Calibration solutions for TDS meters 1000 ppm
A solution of Na2SO4, Na2CO3, NaCl for checking the accuracy of instruments when measuring conductivity and total dissolved solids (salt content) of water.
SKU: 2974726, 2974749
51350076 FRISCOLYT B electrolyte, 250 ml
Electrolyte for filling electrodes.
SKU: 51350076
Calibration solution for conductivity meter 1413 µS/cm, KCl, 125 mL
1413 μS/cm conductivity reference solution for calibrating the conductivity meter / cell and verifying the accuracy of the analysis performed.
SKU: LZW9711.99
HI700640P Cleaning Solution for Milk Deposits (25 x 20 mL Sachets)
Cleaning solution for electrodes in easy-to-use sachets.
SKU: HI700640P
Powder Pillows sachets with buffer pH 10.01 (blue) 50 pcs.
Standard for calibrating pH electrodes.
SKU: 2227166
Buffer solution pH 10.01, 125 ml
Calibration solution with pH 10.01 ± 0.02 at 25 ° C for ph electrodes.
SKU: LZW9470.99
51344751 PerfectION electrolyte B, 5x60 ml
perfectION Mettler Toledo ion selective electrode filling solution for determining Cyanide, Chloride, Silver/Sulfide, Lead concentrations.
SKU: 51344751
51350106 TISAB 3 Ionic Strength Adjustor, 250 ml
Accurate ion determination requires the correct ionic strength adjustment solution (ISA). This solution is suitable for ISE electrodes for fluoride.
SKU: 51350106
Singlet Single-Use pH Buffer, pH 7,00
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is 7,00 ±0.02 at 25°C. Pack of 20 of pH 7,00, 20 mL each.
SKU: 2770120
pH buffer 7.00 (yellow) Powder Pillows 15 pcs.
Powdered pH buffer; 15 individual sealed bags with buffer for pH calibration of electrodes.
SKU: 2227095
pH Buffer Solution, pH 4.01
pH Buffer Solution, concentration 4.01 ± 0.02 pH, 500 mL.
SKU: 2283449.99
51107875 Electrolyte for DX407-Pb electrode
The electrolyte serves to create a stable and well defined electrochemical environment within the DX407-Pb ion selective electrode.
SKU: 51107875
HI7031L KCl solution with a standard conductivity of 1413 µS/cm
The HI7031L is a premium conductivity standard with a conductivity value of 1413 µS/cm, based on a NIST traceable potassium chloride solution.
SKU: HI7031L
HI7007L buffer solution pH 7.01, volume 500 ml
pH 7.01 is the most widely used value of all buffer solutions.
SKU: HI7007L
NaCl solution for conductivity meter calibration 18000 μS/cm, 100 mL
Standard solution for tds and conductivity meters.
SKU: 2307442
51302068 Rainbow I pH Buffer Set
A set of pH calibration solutions in sachets for single use.
SKU: 51302068
51107892 Electrolyte for DX337-Ba electrode
The electrolyte serves to create a stable and well defined electrochemical environment within the DX337-Ba ion selective electrode.
SKU: 51107892
51350080 Electrolyte 3 mol/l KCl, 6 x 250 ml
A 3 mol/L potassium chloride (KCl) solution is commonly used as a filling solution for reference electrodes in various electrochemical measurements. The solution is important for maintaining the stable reference potential required for accurate measurements.
SKU: 51350080
51350016 Buffer pH 2.00, 6 x 250 ml
Technical buffer solution pH 2.00 ± 0.02. The package contains 6 bottles of 250 ml.
SKU: 51350016
NaCl solution for conductivity meter calibration 1990 μS/cm, 100 mL
Standard solution for tds and conductivity meters.
SKU: 210542
Electrolyte solution for ozone sensor 9185 sc
Volume 100 ml.
SKU: Z09185=A=3600
51340036 Electrolyte for GSE Ammonia Electrode
Electrolyte to ensure stable operation and accurate measurements by the GSE Ammonia Electrode.
SKU: 51340036
Recommended products
51302069 Buffer pH 4.01 in sachets 30x20 ml
Disposable pH buffer sachets from Mettler Toledo. The solution is poured into the package under controlled conditions, ensuring a fresh and clean solution for every pH electrode calibration.
SKU: 51302069
ISE standard solution, Fluoride (F-) concentration 100 mg/l; volume 500 ml
Standard Fluoride Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 23249
30464189 Calibration solution pH 8.00
Technical buffer solution pH 8.00 ± 0.02
SKU: 30464189
Conductivity standard solution, 1000 μS/cm, NaCl, 50 ml
NaCl (sodium chloride) standard solution for calibrating conductivity meters and sensors.
SKU: 1440026
Calibration solution for conductivity meter 1413 µS/cm, KCl, 250 mL
Standard conductivity solution 1413 μS/cm for calibrating meter, sensor and verifying analytical accuracy.
SKU: LZW9710.99
51350044 Certified buffer pH 7.00, 6 x 250 ml
Solution for pH electrodes calibration.
SKU: 51350044
51350018 Technical buffer pH 4.01, 6 x 250 ml
pH buffer with a value of 4.01 for calibrating ph electrodes and ph meters.
SKU: 51350018
Calibration solution for conductivity meter 1413 µS/cm, KCl, 125 mL
1413 μS/cm conductivity reference solution for calibrating the conductivity meter / cell and verifying the accuracy of the analysis performed.
SKU: LZW9711.99
51300170 Standard solution conductivity 500 µs/cm
Mettler Toledo 51300170 Conductivity Standard is a high quality reference solution with a known and accurate conductivity value. Used to calibrate and test the performance of meters (conductivity meters) and conductivity sensors.
SKU: 51300170
