998 (90) 174-57-84
HI7041M Electrolyte for Dissolved Oxygen Sensors
SKU: HI7041M
Manufacturer: Hanna Instruments
Availability: Order only
The HI7041M electrolyte is designed for Hanna Instruments polarographic dissolved oxygen sensors. The correct refilling solution has a significant impact on the performance of your Dissolved Oxygen Sensor.
- Bottle volume 230 mL
- KCl solution is made from chemically pure substances
Recommended products
Recommended products
51344752 PerfectION electrolyte С, 5x60 ml
perfectION Mettler Toledo ion selective electrode filling solution for determining Silver concentrations.
SKU: 51344752
Compare
51350060 ORP buffer 220 mV/pH7, 250 ml
ORP buffer is a standard solution used to test the accuracy of ORP sensors (RedOX).
SKU: 51350060
30090856 Calcium standard solution 10 mg/l Ca
A pre-mixed solution with an accurately known concentration of calcium (Ca) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090856
Powder Pillows buffer, pH 6.86, 15 pcs.
Calibration buffer for pH meter in powder form for dilution.
SKU: 1409895
109705 WTW Electrolyte KCl 3 mol/l
The electrolyte is used as a filling solution for refillable electrodes and as a storage solution for all types of pH electrodes.
SKU: 109705
30090855 Calcium standard solution 100 mg/l
A pre-mixed solution with an accurately known concentration of calcium (Ca) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090855
Calibration solution for conductivity meter 1413 µS/cm, KCl, 250 mL
Standard conductivity solution 1413 μS/cm for calibrating meter, sensor and verifying analytical accuracy.
SKU: LZW9710.99
51300170 Standard solution conductivity 500 µs/cm
Mettler Toledo 51300170 Conductivity Standard is a high quality reference solution with a known and accurate conductivity value. Used to calibrate and test the performance of meters (conductivity meters) and conductivity sensors.
SKU: 51300170
Filling Solution, Reference, 3 M KCl, 50 mL
Filling solution for electrode reference element, Potassium Chloride (KCl), 3 M, 50 mL bottle.
SKU: 2756559
KCl calibration solution for conductivity meters 1412 μS/cm
Calibration solutions are designed to adjust the measurement accuracy of instruments when measuring the electrical conductivity of water.
SKU: 2974326, 2974349
HI70039P Conductivity Standard 5000 µS/cm (25 x 20 ml sachets)
HI70039P is a premium solution with a conductivity of 5000 µS/cm that complies with NIST standards and comes in convenient disposable sachets.
SKU: HI70039P
51343182 Electrolyte KNO3 1M; 25 ml
Solution 51343182 is recommended for use with Mettler Toledo DX Series electrodes for the determination of ammonium, potassium and nitrate.
SKU: 51343182
Certified Conductivity Standard Solution, 1408 µS/cm
KCl 0.1D Conductivity calibration solution. Concentration 1408 μS/cm ± 0.5% at 25 °C, 500 ml.
SKU: S51M003
51350016 Buffer pH 2.00, 6 x 250 ml
Technical buffer solution pH 2.00 ± 0.02. The package contains 6 bottles of 250 ml.
SKU: 51350016
Powder Pillows sachets, buffer pH 7.00 (yellow) 250 pcs.
Powder pH buffer 7.00 (yellow) in individual, color-coded sealed sachets for easy identification.
SKU: 2227064
Filling Solution, Reference, Saturated KCl, 59 mL
Filling solution for electrode reference element, Potassium Chloride (KCl), Saturated, 59 mL bottle.
SKU: 25118026
Solution for cleaning pH electrodes from proteins / organic substances, 250 ml
The solution is intended for cleaning the sensitive element of the electrode from contaminants such as proteins and other organic contaminants.
SKU: C20C370
51350096 Conductivity standard 1413 µS/cm, 6 x 250 ml
Solution for calibration and verification of the accuracy of conductometers and conductivity sensors.
SKU: 51350096
Calibration solutions for TDS meters 30 ppm
Solutions are designed to adjust the measurement accuracy of devices when measuring conductivity and total dissolved solids (salinity) of water.
SKU: 2974526, 2974549
ISE standard solution, nitrate (NO3-N) concentration 10 mg/l; volume 500 ml
Standard Nitrate Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 30749
KCl calibration solution for conductivity meter 12890 μS/cm
Calibration solutions are designed to adjust the measurement accuracy of instruments when measuring the electrical conductivity of water.
SKU: 2974426, 2974449
51340030 Electrolyte for DX235-Cl electrode, 20 ml
Electrolyte to ensure stable operation of the DX235-Cl chloride ion selective electrode and to ensure accurate measurements of the concentration of chloride ions in solutions.
SKU: 51340030
Calibration solution for conductivity meter 1413 µS/cm, KCl, 125 mL
1413 μS/cm conductivity reference solution for calibrating the conductivity meter / cell and verifying the accuracy of the analysis performed.
SKU: LZW9711.99
51344750 PerfectION electrolyte A, 5x60 ml
perfectION Mettler Toledo ion selective electrode filling solution for determining calcium, fluoride or sulfide concentrations.
SKU: 51344750
Recommended products
Certified Buffer Standard Solution, pH 9,180
Certified Buffer Standard Solution, pH 9,180 ±0.010 pH at 25°C, 500 mL.
SKU: S11M006
51340031 Electrolyte for DX219-F 20 ml
Electrolyte for ion-selective electrode determining Fluoride ions.
SKU: 51340031
Certified Conductivity Standard Solution, 25 μS/cm, NaCl, 250 ml
Calibration solution for salt meters (TDS meter) and conductivity meters.
SKU: S51M013
51350072 Electrolyte KCl 3M, 250 ml bottle
Electrolyte for filling electrodes.
SKU: 51350072
51340032 Electrolyte for DX240-Ca electrode, 20 ml
Electrolyte to ensure stable operation of the DX240-Ca Calcium ion selective electrode and to ensure accurate measurements of the concentration of Calcium ions in solutions.
SKU: 51340032
51350024 Technical buffer pH 10.00, 6 x 250 ml
Buffer solution with a pH value of 10.00 for calibrating pH meters and electrodes.
SKU: 51350024
Certified Conductivity Standard Solution, 1015 µS/cm
Certified solution with standard conductivity, 0.05% sodium chloride (NaCl), concentration 1015 μS/cm ± 0.5% at 25 °C, 500 ml.
SKU: S51M004
51350036 Certified buffer pH 9.21, 250 mL
Solution for calibration of pH electrodes.
SKU: 51350036
Singlet Single-Use pH Buffer, pH 4,01
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is 4,01 ±0.02 at 25°C. Pack of 20 of pH 4,01 pH, 20 mL each.
SKU: 2770020
