998 (90) 174-57-84
HI700601P Electrode Cleaning Solution (25 sachets x 20 ml)
SKU: HI700601P
Manufacturer: Hanna Instruments
Availability: Order only
Cleaning solution for general purpose pH electrodes used in a variety of applications. The package contains 25 sachets of 20 ml.
Cleaning is a quick and effective procedure that should be performed regularly to prevent clogging of the connection.
- Specially designed for cleaning electrodes.
- Convenient single use sachets keep the solution fresh
Description Specifications Recommended products
Description
Description
HI700601P is a high performance cleaning solution designed specifically for pH electrodes. The electrodes become dirty during use resulting in inaccurate results even if they read correctly in pH buffer.
Cleaning solutions from Hanna Instruments remove contaminants that remain on the surface of electrodes when immersed in samples during measurement or improperly stored. It is recommended that you regularly clean the bulb and connection of your electrode to ensure that the sensor is always clean and to prevent clogging.
Specifications
| Quantity | 25 x 20 mL |
Recommended products
ISE standard solution, nitrate (NO3-N) concentration 1000 mg/l; volume 500 ml
Standard Nitrate Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 1279249
Compare
Solution for cleaning pH electrodes from proteins / organic substances, 250 ml
The solution is intended for cleaning the sensitive element of the electrode from contaminants such as proteins and other organic contaminants.
SKU: C20C370
Certified Conductivity Standard Solution, 111,3 mS/cm
Calibration solution for conductivity and TDS meters, concentration 111.3 mS/cm ± 0.5% (k = 2) at 25 °C, 500 ml.
SKU: S51M001
Certified Buffer Standard Solution, pH 6,865
Certified Buffer Standard Solution, pH 6,865 ±0.010 pH at 25°C, 500 mL.
SKU: S11M003
Certified Conductivity Standard Solution, 1408 µS/cm
KCl 0.1D Conductivity calibration solution. Concentration 1408 μS/cm ± 0.5% at 25 °C, 500 ml.
SKU: S51M003
51350064 ORP buffer 468 mV/pH 0.1; package 6 x 30 ml
Standard solution for calibrating and checking the accuracy of ORP electrodes.
SKU: 51350064
51302069 Buffer pH 4.01 in sachets 30x20 ml
Disposable pH buffer sachets from Mettler Toledo. The solution is poured into the package under controlled conditions, ensuring a fresh and clean solution for every pH electrode calibration.
SKU: 51302069
30458274 buffer pH 1.679
Calibration solution with a pH value of 1.679. Bottle 250 ml.
SKU: 30458274
Storage solution for pH electrodes, 500 ml
Solution for storing electrodes of pH meters - KCl, KH₂PO₄, Na₂HPO₄, glutaric dialdehyde.
SKU: 2756549
pH Buffer Powder Pillows, pH 7.00 (yellow) 50 pcs.
Powder pH buffer in individually sealed sachets. The color coding makes it easy to identify the pH value of the prepared solution.
SKU: 2227066
Calibration solutions for TDS meters 30 ppm
Solutions are designed to adjust the measurement accuracy of devices when measuring conductivity and total dissolved solids (salinity) of water.
SKU: 2974526, 2974549
51300170 Standard solution conductivity 500 µs/cm
Mettler Toledo 51300170 Conductivity Standard is a high quality reference solution with a known and accurate conductivity value. Used to calibrate and test the performance of meters (conductivity meters) and conductivity sensors.
SKU: 51300170
30090851 Standard solution 100 mg/l (fluoride)
The standard fluoride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of fluoride ions (F). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of fluoride ions in the sample.
SKU: 30090851
30090860 Ammonium standard solution 100 mg/l
A pre-mixed solution with an accurately known concentration of ammonium (NH4) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090860
Filling Solution, Reference, 2,44 M KCl, 59 mL
Filling solution for electrode reference element, Potassium Chloride (KCl), 2,44 M, 59 mL bottle.
SKU: 2965026
51340033 Electrolyte for DX239-K electrode, 20 ml
Electrolyte to ensure stable operation of the DX239-K potassium ion selective electrode and to ensure accurate measurements of the concentration of potassium ions in solutions.
SKU: 51340033
Solution for cleaning ph electrodes from fats, oils and greases, 500 ml
Easy cleaning of the pH electrode after use in samples containing fats, greases and oils.
SKU: 2964449
Calibration solution for conductivity meter 147 μS/cm, KCl, 125 mL
Solution for calibrating the conductivity meter and checking the accuracy of the analysis.
SKU: LZW9701.99
51107898 Electrolyte for DX327-I electrode
The electrolyte serves to create a stable and well defined electrochemical environment within the DX327-I ion selective electrode.
SKU: 51107898
51302068 Rainbow I pH Buffer Set
A set of pH calibration solutions in sachets for single use.
SKU: 51302068
51350060 ORP buffer 220 mV/pH7, 250 ml
ORP buffer is a standard solution used to test the accuracy of ORP sensors (RedOX).
SKU: 51350060
Certified Buffer Standard Solution, pH 7,000
Certified Buffer Standard Solution, pH 7,000 ±0.010 pH at 25°C, 500 mL.
SKU: S11M004
HI7007L buffer solution pH 7.01, volume 500 ml
pH 7.01 is the most widely used value of all buffer solutions.
SKU: HI7007L
Filling Solution, ISENH3181, 0,1 M NH4Cl, 50 mL
Filling solution for Ammonia Ion Selective Electrode (ISENH3181), Ammonium Chloride (NH4Cl), 50 mL bottle.
SKU: 4447226
Recommended products
Calibration solution for conductivity meter 147 μS/cm, KCl, 125 mL
Solution for calibrating the conductivity meter and checking the accuracy of the analysis.
SKU: LZW9701.99
30111136 Buffer pH 4.006 sachets 30x20 ml
Sealed sachets with fresh pH buffer solution for single use.
SKU: 30111136
ISE standard solution, Fluoride (F-) concentration 10 mg/l; volume 500 ml
Standard Fluoride Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 35949
51344751 PerfectION electrolyte B, 5x60 ml
perfectION Mettler Toledo ion selective electrode filling solution for determining Cyanide, Chloride, Silver/Sulfide, Lead concentrations.
SKU: 51344751
301111389 Buffer pH 10.012 sachets 30x20 ml
Sealed sachets with fresh pH buffer solution for single use.
SKU: 30111139
HI700663P Cleaning Solution for Soil Deposits (25 x 20 mL Sachets)
Cleaning solution for electrodes in easy-to-use sachets.
SKU: HI700663P
HI7041M Electrolyte for Dissolved Oxygen Sensors
The HI7041M electrolyte is designed for Hanna Instruments polarographic dissolved oxygen sensors. The correct filling solution is critical to the performance of your Dissolved Oxygen Sensor.
SKU: HI7041M
Certified Buffer Standard Solution, pH 9,180
Certified Buffer Standard Solution, pH 9,180 ±0.010 pH at 25°C, 500 mL.
SKU: S11M006
HI7033L Conductivity standard 84 µS/cm (500 ml bottle)
HI7033L is a superior conductivity standard with a conductivity value of 84 µS/cm, prepared from a potassium chloride solution, traceable to NIST.
SKU: HI7033L
