998 (90) 174-57-84
30090853 Standard solution 100 mg/l (chloride)
SKU: 30090853
Manufacturer: Mettler Toledo
Availability: Order only
The Mettler Toledo Chloride Standard Solution 30090853 for Ion Selective Electrodes (ISE) is a solution with an accurately known concentration of chloride ions (100 mg/L Cl⁻). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of chloride ions in the sample.
The volume of the bottle is 500 ml.
Specifications Recommended products
Specifications
Specifications
| Type | Standard solutions - one-parameter analysis |
| Parameters | Chloride |
| Concentration | 100 mg/L Cl |
Recommended products
Standard solution, aluminum, 100 mg/L as Al (NIST), 100 mL
Standard solution, aluminum, 100 mg/L as Al (NIST), 100 mL.
SKU: 1417442
Compare
Reagent kit Amtax sc with standard, for range 10 - 1000 mg/L NH4-N
LCW866 Reagent Kit for Oline Ammonium Analyzer with Standard Calibration Solutions.
SKU: LCW866
Calcium Hardness Standard Solution, 10000 mg/L CaCO3 (NIST)
Calcium Hardness Standard Solution. For accuracy checks in calcium hardness determinations. Concentration: 10000 mg/L CaCO3 (NIST).
SKU: 218710
Standard solution, manganese, 100 mL
Standard solution, manganese, 100 mL. Concentration: 1000 mg/L as Mn (NIST). For accuracy checks in manganese determinations (HNO3 matrix).
SKU: 1279142
Reagent kit Amtax sc with standard, for range 0.02 - 5 mg/L NH4-N
A set of reagents with standard solutions for calibration.
SKU: LCW889
Nitratax control standard, 200 mg/L NO3 (45.2 mg/L NO3-N)
Standard solution for calibration / verification of the Nitratax sc process probe.
SKU: LCW827
COD standard solution, 300 mg/L O2 (NIST)
COD standard solution, concentration 300 mg/L O2.
SKU: 1218649
Chromium, trivalent, standard solution, 50 mg/L Cr3 + (NIST), 100 ml
Solution for checking the accuracy of the analysis when determining the concentration of total chromium.
SKU: 1415142
Sulphuric acid standard solution, 5,25 N
Sulfuric acid standard solution, 5,25 N, 100 mL bottle.
SKU: 244932
Standard Solution, Manganese, 10 mg/L Mn (NIST), PourRite Ampoules
Used to check the accuracy of the analysis when determining manganese in a water sample.
SKU: 2605820
SKU: 1054322511
ORP buffer solution for calibration 200 mV, 500 ml
ORP reference solution used to calibrate the ORP sensor (in resealable plastic bottles).
SKU: 25M2A1001-115
30090859 Ammonium standard solution 1000 mg/l
A pre-mixed solution with an accurately known concentration of ammonium (NH4) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090859
Boron standard solution, 1000 mg/L as B (NIST)
Boron standard solution, 1000 mg/L as B (NIST).
SKU: 191442
ORP calibration solution in ampoules (Light's solution)
Light's solution in ampoules for calibration of ORP meters. The package contains 20 ampoules of 20 ml.
SKU: 2612520
Quality control standard hardness, low range, 500 mL
Quality control standard hardness, low range, 500 mL.
SKU: 2833449
Phosphate standard solution, 1 mg/L PO4
Phosphate Standard Solution, concentration 1 mg/L PO4.
SKU: 256949
COD standard solution, 1000 mg/L O2 (NIST)
COD standard solution, concentration 1000 mg/L O2.
SKU: 2253929
Ammonia Standard Solution, 100 mg/L NH3-N, 500 mL
Ammonia Standard Solution, 100 mg/L NH3-N, 500 mL bottle.
SKU: 2406549
Nitratax control standard, 100 mg/L NO3 (22.6 mg/L NO3-N)
Standard solution for calibration / verification of the Nitratax sc process probe.
SKU: LCW826
Addista Mono standard for chlorine cuvette test LCK310
Addista Mono standard for chlorine cuvette test LCK310, concentration 25 - 30 mg/L Cl2.
SKU: LCA310
Nitrite standard solution, 250 mg/L NO2-N, APHA
Nitrite standard solution, concentration 250 mg/L NO2-N.
SKU: 2340249
51344776 Standard solution for ISE 1000 mg/l I⁻
The iodide standard solution for ion selective electrodes provides accurate reference points for reliable measurements of iodide ion concentrations in samples.
SKU: 51344776
30090851 Standard solution 100 mg/l (fluoride)
The standard fluoride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of fluoride ions (F). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of fluoride ions in the sample.
SKU: 30090851
Recommended products
Standard solution, zinc, 100 mg/L as Zn (NIST), 100 mL
Standard solution, zinc. For accuracy checks in zinc determinations. Concentration: 100 mg/L as Zn (NIST).
SKU: 237842
Nitratax control standard, 400 mg/L NO3 (90.4 mg/L NO3-N)
Standard solution for calibration / verification of the Nitratax sc process probe.
SKU: LCW863
Nitrite standard solution, 250 mg/L NO2-N, APHA
Nitrite standard solution, concentration 250 mg/L NO2-N.
SKU: 2340249
COD standard solution, 1000 mg/L O2 (NIST)
COD standard solution, concentration 1000 mg/L O2.
SKU: 2253929
Addista Mono standard for chlorine cuvette test LCK310
Addista Mono standard for chlorine cuvette test LCK310, concentration 25 - 30 mg/L Cl2.
SKU: LCA310
51344775 Standard solution 1000 mg/l (fluoride)
The standard fluoride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of fluoride ions (F). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of fluoride ions in the sample.
SKU: 51344775
COD standard solution, 300 mg/L O2 (NIST)
COD standard solution, concentration 300 mg/L O2.
SKU: 1218649
Sodium chloride standard solution, 1000 µS/cm (NIST)
Sodium chloride standard solution, concentration 1000 µS/cm.
SKU: 1440049
30090851 Standard solution 100 mg/l (fluoride)
The standard fluoride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of fluoride ions (F). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of fluoride ions in the sample.
SKU: 30090851
