998 (90) 174-57-84
51344751 PerfectION electrolyte B, 5x60 ml
SKU: 51344751
Manufacturer: Mettler Toledo
Availability: Order only
Solution for filling perfectION Mettler Toledo ion-selective electrodes designed to determine the concentration of Cyanide, Chloride, Silver/Sulfide, Lead ions.
By filling the electrode with the correct and fresh electrolyte, an accurate measurement of the ions is ensured. Maintain the electrolyte level by topping up regularly. When immersing the sensor in the analyzed solution, make sure that the electrolyte level is always higher than the sample level.
Recommended products
Recommended products
Solution for cleaning pH electrodes from proteins / organic substances, 250 ml
The solution is intended for cleaning the sensitive element of the electrode from contaminants such as proteins and other organic contaminants.
SKU: C20C370
Compare
HI6016 Calibration solution pH 1.679 ± 0.002 at 25°C
HI6016 is a pH 1.679 +/- 0.002 pH calibration buffer.
SKU: HI6016
HI70039P Conductivity Standard 5000 µS/cm (25 x 20 ml sachets)
HI70039P is a premium solution with a conductivity of 5000 µS/cm that complies with NIST standards and comes in convenient disposable sachets.
SKU: HI70039P
51107898 Electrolyte for DX327-I electrode
The electrolyte serves to create a stable and well defined electrochemical environment within the DX327-I ion selective electrode.
SKU: 51107898
HI70030P Conductivity Standard 12880 µS/cm (25 x 20 ml sachets)
HI70030P is a premium solution with a conductivity of 12,880 µS/cm that complies with NIST standards and comes in convenient disposable sachets.
SKU: HI70030P
51350044 Certified buffer pH 7.00, 6 x 250 ml
Solution for pH electrodes calibration.
SKU: 51350044
Chloride Standard Solution, 1000 mg/L, 500 mL
ISE Standard Solution. Chloride, 1000 mg/L ±10 mg/L Cl- (NIST). 500 mL bottle.
SKU: 18349
Ionic Strength Adjustor Nitrate (ISA), 100 pieces
Ionic Strength Adjustor for Hach Ion Selective Electrodes.
SKU: 2984799
51344754 PerfectION electrolyte E, 5x60 ml
perfectION Mettler Toledo ion selective electrode filling solution for determining potassium concentrations.
SKU: 51344754
Buffer Solution, pH 1,09
Buffer Solution, concentration pH 1,09 ± 0,02, 500 mL.
SKU: S11M009
30090847 Standard solution conductivity 1.3 µs/cm
Mettler Toledo 30090847 Conductivity Standard is a high quality reference solution with a known and accurate conductivity value. Used to calibrate and test the performance of meters (conductivity meters) and conductivity sensors.
SKU: 30090847
Conductivity standard solution, 1000 μS/cm, NaCl, 50 ml
NaCl (sodium chloride) standard solution for calibrating conductivity meters and sensors.
SKU: 1440026
51350078 Electrolyte KNO3 1M; 250 ml
Solution 51350078 is recommended for use with Mettler Toledo DX Series electrodes for the determination of ammonium, potassium and nitrate.
SKU: 51350078
51343181 Electrolyte KCl 1 mol/l 25 ml
Made from the highest quality reagents to ensure optimum performance of your electrode.
SKU: 51343181
51302153 Standard solution conductivity 84 µs/cm
Mettler Toledo 51302153 Conductivity Standard is a high quality reference solution with a known and accurate conductivity value. Used to calibrate and test the performance of meters (conductivity meters) and conductivity sensors.
SKU: 51302153
108702 WTW TEP 7: Technical buffer solution, pH 7.00 (1 liter)
Buffer solution for pH meters calibration. Ph value is 7.00
SKU: 108702
51343185 FRISCOLYT B electrolyte, 25 ml
Electrolyte for filling electrodes.
SKU: 51343185
Calibration solution ph 4.01, 250 mL
Buffer solution with a standard pH value for calibrating and verifying the accuracy of pH electrodes and hydrogen ion meters.
SKU: LZW9463.99
51302070 Buffer pH 9.21 in sachets 30x20 ml
Disposable pH buffer sachets from Mettler Toledo. The solution is poured into the package under controlled conditions, ensuring a fresh and clean solution for every pH electrode calibration.
SKU: 51302070
Filling Solution, Reference, 3 M KCl with AgCl, 28 mL
Filling solution for electrode reference element, Potassium Chloride (KCl) with Saturated AgCl, 3 M, 28 mL bottle.
SKU: 2841700
Singlet Single-Use pH Buffer, pH 7,00
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is 7,00 ±0.02 at 25°C. Pack of 20 of pH 7,00, 20 mL each.
SKU: 2770120
30090852 Standard solution 10 mg/l (fluoride)
The standard fluoride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of fluoride ions (F). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of fluoride ions in the sample.
SKU: 30090852
ISE Ammonia Standard Solution, 1 mg/L, 500 mL
ISE Standard Solution. Ammonia, 1,00 mg/L ±0.03 mg/L NH3-N. 500 mL bottle.
SKU: 189149
Certified Buffer Standard Solution, pH 12,45
Certified Buffer Standard Solution, pH 12,45 ±0,05 pH at 25°C, 500 mL.
SKU: S11M008
Recommended products
51350074 Electrolyte 3 mol/l KCl saturated AgCl, 250 ml
Solution for filling electrodes Mettler Toledo.
SKU: 51350074
ISE standard solution, nitrate (NO3-N) concentration 100 mg/l; volume 500 ml
Standard Nitrate Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 194749
Buffer solution pH 7.00 25 mL
Colorless pH meter calibration solution.
SKU: 1222220
Singlet Single-Use pH Buffer Kit, pH 4,01 & 7,00
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is ±0.02 at 25°C. Pack of 20 of pH 4,01 & 7,00, 20 mL each.
SKU: 2769920
51350072 Electrolyte KCl 3M, 250 ml bottle
Electrolyte for filling electrodes.
SKU: 51350072
109705 WTW Electrolyte KCl 3 mol/l
The electrolyte is used as a filling solution for refillable electrodes and as a storage solution for all types of pH electrodes.
SKU: 109705
30095314 All-in-One Kit 1 6x250 ml
The kit contains 250 ml vials with the following components: technical buffers pH pH 4.01, pH 7.00, pH 9.21, 3 mol/L KCl electrolyte, cleaning solution (pepsin) and InLab storage solution.
SKU: 30095314
51300169 Standard solution conductivity 10 µs/cm
Mettler Toledo 51300169 Conductivity Standard is a high quality reference solution with a known and accurate conductivity value. Used to calibrate and test the performance of meters (conductivity meters) and conductivity sensors.
SKU: 51300169
HI7082 electrolyte for pH and ORP electrodes 3.5M KCl (4 x 30 ml)
KCl solution 3.5 M for filling pH and ORP electrodes with a double salt bridge.
SKU: HI7082
