HI7077L Electrode Oil and Grease Cleaner Solution (500 ml)

SKU: HI7077L
Manufacturer: Hanna Instruments
Availability: In stock
The electrode cleaning solution contains the necessary chemicals to dissolve any oily and greasy deposits and coatings.
- Specially formulated cleaning solution for removing oils and fats from the pH electrode.
- Tamper-proof sealed bottle to ensure the quality of the solution.
- The expiration date and batch number are clearly marked on the bottle.
Description Recommended products
Description
Description
The HI7077L solution is specifically designed for use in applications that allow electrodes to come into contact with oily and greasy samples. The electrodes can become dirty in use and will give inaccurate results even if they read correctly in pH buffer. Hanna cleaning solutions remove dirt and residues that remain on the surface of electrodes when immersed in samples during measurement and improperly stored.
A series of cleaning solutions ensures that your sensors are used to their maximum performance and accuracy when used as intended. Cleaning is a quick and effective procedure that should be performed on a regular basis as a preventive measure against the use of a dirty electrode and to ensure that the connection is not clogged.
Recommended products
108703 WTW TEP 10: Technical buffer solution, pH 10.01 (1 liter)
Buffer solution for pH meters calibration. Ph value is 10.01
SKU: 108703
Filling Solution, ISENH3181, 0,1 M NH4Cl, 50 mL
Filling solution for Ammonia Ion Selective Electrode (ISENH3181), Ammonium Chloride (NH4Cl), 50 mL bottle.
SKU: 4447226
Calibration solutions for TDS meters 300 ppm
The solutions are designed to check the accuracy of measurement and calibration of devices in the analysis of conductivity and total salinity (salinity) of water.
SKU: 2974626, 2974649
ISE standard solution, nitrate (NO3-N) concentration 1 mg/l; volume 500 ml
Standard Nitrate Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 204649
30090859 Ammonium standard solution 1000 mg/l
A pre-mixed solution with an accurately known concentration of ammonium (NH4) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090859
51302050 Conductivity standard 12.88 mS/cm, sachets 30x20ml
A solution with a standard conductivity value of 12.88 mS/cm for calibrating conductivity sensors.
SKU: 51302050
ISE Ammonia Standard Solution, 1000 mg/L, 1 L
ISE Standard Solution. Ammonia, 1000 mg/L ±20 mg/L NH3-N. 1 L bottle.
SKU: 2354153
Conductivity calibration solution 12.88 mS/cm, KCl, 125 mL
Standard conductivity solution. 12.88 mS/cm ± 0.11 mS/cm @ 25 °C. Potassium chloride (KCl) (0.1 M). Bottle 125 ml.
SKU: LZW9721.99
51344753 PerfectION electrolyte D, 5x60 ml
perfectION Mettler Toledo ion selective electrode filling solution for determining iodide and copper concentrations.
SKU: 51344753
30095313 Rainbow Kit 2 pH Buffer Set, 6 x 250 ml
Set of pH calibration solutions. The package contains pH 4.01/7.00/10.00 buffers, 2 bottles each.
SKU: 30095313
Buffer Solution, pH 1,09
Buffer Solution, concentration pH 1,09 ± 0,02, 500 mL.
SKU: S11M009
51107872 Electrolyte for DX258-SCN ISE electrode, 20 ml
Electrolyte to ensure stable operation of the DX258-SCN Thiocyanate ion selective electrode and to ensure accurate measurements of the concentration of Thiocyanate ions in solutions.
SKU: 51107872
51350036 Certified buffer pH 9.21, 250 mL
Solution for calibration of pH electrodes.
SKU: 51350036
Powder Pillows buffer, pH 6.86, 15 pcs.
Calibration buffer for pH meter in powder form for dilution.
SKU: 1409895
30090855 Calcium standard solution 100 mg/l
A pre-mixed solution with an accurately known concentration of calcium (Ca) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090855
Solution for cleaning pH electrodes from minerals / inorganic samples, 500 ml
Using cleaning solutions will provide faster measurements, improve pH accuracy, and extend the life of the pH meter electrode.
SKU: 2975149
HI7010L buffer pH 10.01, volume 500 ml
A pH 10.01 buffer solution is commonly used to calibrate equipment used to analyze samples of water and other liquids.
SKU: HI7010L
51350108 Ionic Strength Adjustor 0.9 mol/L Al2(SO4)3, 250 ml
Accurate ion determination requires the correct solution (ISA) to adjust ionic strength. This solution is used in determining the concentration of nitrate, fluoroborate, lithium, ammonium and potassium ions.
SKU: 51350108
HI70010P pH 10.01 Calibration Solution, 25 x 20 ml sachets
pH buffer for electrode calibration with a pH value of 10.01 ± 0.01 pH at 25°C
SKU: HI70010P
30111142 InLab Electrode Storage Solution
Solution for storage of electrodes.
SKU: 30111142
51350026 Technical buffer pH 11.00, 6 x 250 ml
The package contains 6 bottles of 250 ml buffer solution.
SKU: 51350026
Certified Buffer Standard Solution, pH 7,000
Certified Buffer Standard Solution, pH 7,000 ±0.010 pH at 25°C, 500 mL.
SKU: S11M004
HI77100P Calibration Solutions 1413 µS/cm and pH 7.01 in sachets
The HI77100P is a set of high quality 1413 µS/cm conductivity standards and pH 7.01 buffers in easy-to-use disposable sachets.
SKU: HI77100P
51340033 Electrolyte for DX239-K electrode, 20 ml
Electrolyte to ensure stable operation of the DX239-K potassium ion selective electrode and to ensure accurate measurements of the concentration of potassium ions in solutions.
SKU: 51340033
Recommended products
ORP / Redox calibration solution (ZoBell's solution)
Standard solution for calibration and accuracy verification of ORP electrodes.
SKU: 2316949
51350104 Electrode regeneration solution
Solution for the restoration of glass pH electrodes.
SKU: 51350104
51350024 Technical buffer pH 10.00, 6 x 250 ml
Buffer solution with a pH value of 10.00 for calibrating pH meters and electrodes.
SKU: 51350024
HI6007 Calibration solution pH 7.010 ± 0.002 at 25°C
HI6007 is a pH 7.010 +/- 0.002 pH calibration buffer.
SKU: HI6007
30111137 Buffer pH 6.865 sachets 30x20 ml
Sealed sachets with fresh pH buffer solution for single use.
SKU: 30111137
Calibration solution for conductivity meter 147 μS/cm, KCl, 250 ml
Sodium chloride standard solution for checking the accuracy of the conductivity analysis procedure of the aqueous solution and the instrument being measured.
SKU: LZW9700.99
51302050 Conductivity standard 12.88 mS/cm, sachets 30x20ml
A solution with a standard conductivity value of 12.88 mS/cm for calibrating conductivity sensors.
SKU: 51302050
51340035 Electrolyte for DX218-NH4, 20 ml
Solution for filling the DX218-NH4 electrode.
SKU: 51340035
Powder Pillows sachets with buffer pH 10.01 (blue) 50 pcs.
Standard for calibrating pH electrodes.
SKU: 2227166




