998 (90) 174-57-84
51107891 Electrolyte for DX312-Cd electrode
SKU: 51107891
Manufacturer: Mettler Toledo
Availability: Order only
Electrolyte (electrode filling solution) 51107891 Mettler Toledo, designed for the DX312-Cd ion selective electrode, which is sensitive to Cadmium ions in solutions. Volume 20 ml.
The right electrolyte ensures long-term stability and maximum electrode performance.
Recommended products
Recommended products
30090855 Calcium standard solution 100 mg/l
A pre-mixed solution with an accurately known concentration of calcium (Ca) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090855
Compare
HI770710P pH 7.01 and 10.01 Buffer Sachets (Kit)
Set of calibration buffer solutions pH 7.01 and 10.01 +/- 0.01 pH at 25°C.
SKU: HI770710P
HI7073L Cleansing Solution for Proteins
HI7073L is a solution for cleaning pH electrodes that come into contact with samples containing protein (food, biological samples). The volume of the bottle is 500 ml.
SKU: HI7073L
HI70031P Conductivity Standard 1413 µS/cm (25 x 20 ml sachets)
HI70031P is a premium solution with a conductivity of 1413 µS/cm that complies with NIST standards and comes in convenient disposable sachets.
SKU: HI70031P
ORP / Redox calibration solution (ZoBell's solution)
Standard solution for calibration and accuracy verification of ORP electrodes.
SKU: 2316949
51302080 Rainbow II pH Buffer Set
A set of pH calibration solutions in sachets for single use.
SKU: 51302080
Certified Buffer Standard Solution, pH 7,000
Certified Buffer Standard Solution, pH 7,000 ±0.010 pH at 25°C, 500 mL.
SKU: S11M004
51302153 Standard solution conductivity 84 µs/cm
Mettler Toledo 51302153 Conductivity Standard is a high quality reference solution with a known and accurate conductivity value. Used to calibrate and test the performance of meters (conductivity meters) and conductivity sensors.
SKU: 51302153
ISE Ammonia Standard Solution, 100 mg/L, 500 mL
ISE Standard Solution. Ammonia, 100 mg/L ±2 mg/L NH3-N. 500 mL bottle.
SKU: 2406549
51350046 Buffer pH 9.21, 6 x 250 ml
Solution with a standard pH value of 9.21±0.02
SKU: 51350046
30111135 Buffer pH 11.00 in sachets 30x20 ml
Disposable pH buffer sachets from Mettler Toledo. The solution is poured into the package under controlled conditions, ensuring a fresh and clean solution for every pH electrode calibration.
SKU: 30111135
Certified Buffer Standard Solution, pH 10,012
Certified Buffer Standard Solution, pH 10,012 ±0.010 pH at 25°C, 500 mL.
SKU: S11M007
Certified Conductivity Standard Solution, 111,3 mS/cm
Calibration solution for conductivity and TDS meters, concentration 111.3 mS/cm ± 0.5% (k = 2) at 25 °C, 500 ml.
SKU: S51M001
HI7082 electrolyte for pH and ORP electrodes 3.5M KCl (4 x 30 ml)
KCl solution 3.5 M for filling pH and ORP electrodes with a double salt bridge.
SKU: HI7082
51350060 ORP buffer 220 mV/pH7, 250 ml
ORP buffer is a standard solution used to test the accuracy of ORP sensors (RedOX).
SKU: 51350060
51302050 Conductivity standard 12.88 mS/cm, sachets 30x20ml
A solution with a standard conductivity value of 12.88 mS/cm for calibrating conductivity sensors.
SKU: 51302050
51344771 Calcium standard solution 1000 mg/l
A pre-mixed solution with an accurately known concentration of calcium (Ca) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 51344771
51350072 Electrolyte KCl 3M, 250 ml bottle
Electrolyte for filling electrodes.
SKU: 51350072
Buffer solution pH 7.00 25 mL
Colorless pH meter calibration solution.
SKU: 1222220
51350102 pH electrode cleaning solution (thiourea)
Flushing with deionized water is not sufficient if silver sulfide contamination is present; In this case, it is recommended to use a cleaning solution with thiourea.
SKU: 51350102
30090847 Standard solution conductivity 1.3 µs/cm
Mettler Toledo 30090847 Conductivity Standard is a high quality reference solution with a known and accurate conductivity value. Used to calibrate and test the performance of meters (conductivity meters) and conductivity sensors.
SKU: 30090847
KCl calibration solution for conductivity meters 146.9 μS/cm
Calibration solutions are designed to adjust the measurement accuracy of instruments when measuring the electrical conductivity of water.
SKU: 2974226, 2974249
Calibration solutions for TDS meters 1000 ppm
A solution of Na2SO4, Na2CO3, NaCl for checking the accuracy of instruments when measuring conductivity and total dissolved solids (salt content) of water.
SKU: 2974726, 2974749
51343181 Electrolyte KCl 1 mol/l 25 ml
Made from the highest quality reagents to ensure optimum performance of your electrode.
SKU: 51343181
Recommended products
Calibration solution ph 7.00, 250 mL
Buffer solution for calibration and accuracy check of pH electrodes and hydrogen ion meters, pH is 7.00 ± 0.02 pH at 25 °C
SKU: LZW9464.98
51107894 Electrolyte for DX232-S 20 ml
Electrolyte for ion-selective electrode determining Sulfide ions.
SKU: 51107894
Certified Conductivity Standard Solution, 1408 µS/cm
KCl 0.1D Conductivity calibration solution. Concentration 1408 μS/cm ± 0.5% at 25 °C, 500 ml.
SKU: S51M003
HI7041M Electrolyte for Dissolved Oxygen Sensors
The HI7041M electrolyte is designed for Hanna Instruments polarographic dissolved oxygen sensors. The correct filling solution is critical to the performance of your Dissolved Oxygen Sensor.
SKU: HI7041M
51344761 PerfectION calcium ISA, 475 ml
Ionic strength adjuster for obtaining accurate readings from an ion-selective electrode that determines the concentration of calcium.
SKU: 51344761
Cleaning solution for pH electrodes, RENOVO.X extra strong, 250 mL
Electrode cleaning solution, RENOVO.X extra strong Hach Lange.
SKU: S16M002
Singlet Single-Use pH Buffer Kit, pH 4,01 & 7,00
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is ±0.02 at 25°C. Pack of 20 of pH 4,01 & 7,00, 20 mL each.
SKU: 2769920
Certified Conductivity Standard Solution, 1015 µS/cm
Certified solution with standard conductivity, 0.05% sodium chloride (NaCl), concentration 1015 μS/cm ± 0.5% at 25 °C, 500 ml.
SKU: S51M004
Singlet Single-use Conductivity Standard Solution, 147 µS/cm
Conductivity Standard Solution. Concentration 147 µS/cm at 25°C ±10% at 25°C. Pack of 20, 20 mL each.
SKU: 2771320
