998 (90) 174-57-84
51343181 Electrolyte KCl 1 mol/l 25 ml
SKU: 51343181
Manufacturer: Mettler Toledo
Availability: Order only
Mettler Toledo Electrolyte 51343181 is made from the highest quality reagents to ensure optimum performance of your electrode. Always fill the electrode with the correct and fresh electrolyte to obtain accurate measurement results.
The volume of the bottle is 25 ml.
Specifications Recommended products
Specifications
Specifications
| Type | Filling solution |
Recommended products
Buffer Powder Pillows, pH 4.01 colour-coded red
Color-coded powdered pH buffer for pH electrode calibration.
SKU: 2226995
Compare
51344771 Calcium standard solution 1000 mg/l
A pre-mixed solution with an accurately known concentration of calcium (Ca) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 51344771
Calibration solution for conductivity meter 1413 µS/cm, KCl, 250 mL
Standard conductivity solution 1413 μS/cm for calibrating meter, sensor and verifying analytical accuracy.
SKU: LZW9710.99
51350024 Technical buffer pH 10.00, 6 x 250 ml
Buffer solution with a pH value of 10.00 for calibrating pH meters and electrodes.
SKU: 51350024
30111142 InLab Electrode Storage Solution
Solution for storage of electrodes.
SKU: 30111142
Filling Solution, ISENH3181, 0,1 M NH4Cl, 50 mL
Filling solution for Ammonia Ion Selective Electrode (ISENH3181), Ammonium Chloride (NH4Cl), 50 mL bottle.
SKU: 4447226
51302068 Rainbow I pH Buffer Set
A set of pH calibration solutions in sachets for single use.
SKU: 51302068
Chloride Ionic Strength Adjustor (ISA) Powder Pillows, pk/100
Chloride Ionic Strength Adjustor (ISA) for Chloride determinations by Ion Selective Electrode (ISE) method. Ideal for low Chloride level readings. Pack of 100 powder pillows.
SKU: 2318069
30090854 Standard solution 10 mg/l (chloride)
The standard chloride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of chloride ions (Cl⁻). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of chloride ions in the sample.
SKU: 30090854
51350092 Conductivity standard 1413 µS/cm, 250 ml
Solution for calibration and verification of devices that measure the electrical conductivity of solutions.
SKU: 51350092
Certified Conductivity Standard Solution, 1408 µS/cm
KCl 0.1D Conductivity calibration solution. Concentration 1408 μS/cm ± 0.5% at 25 °C, 500 ml.
SKU: S51M003
Singlet Single-use Conductivity Standard Solution, 12,88 mS/cm
Solution with standard conductivity in individual sealed sachets, no color coding. Potassium chloride (KCl).
SKU: 2771520
Filling Solution, Reference, Saturated KCl, 59 mL
Filling solution for electrode reference element, Potassium Chloride (KCl), Saturated, 59 mL bottle.
SKU: 25118026
HI70004P pH 4.01 buffer solution for calibration (25 x 20 ml)
HI70004P contains 25 sachets containing 20 ml buffer solution for calibrating pH meters and electrodes.
SKU: HI70004P
Calibration solution ph 10.01, 250 ml
PH buffer solution 10.01 ± 0.02 pH at 25 °C for checking the accuracy of pH meters and electrodes.
SKU: LZW9471.99
Calibration solutions for TDS meters 30 ppm
Solutions are designed to adjust the measurement accuracy of devices when measuring conductivity and total dissolved solids (salinity) of water.
SKU: 2974526, 2974549
pH buffer 7.00 (yellow) Powder Pillows 15 pcs.
Powdered pH buffer; 15 individual sealed bags with buffer for pH calibration of electrodes.
SKU: 2227095
Buffer solution pH 7.00, 125 mL
Calibration solution for pH meters and electrodes.
SKU: LZW9461.98
Calibration solutions for TDS meters 300 ppm
The solutions are designed to check the accuracy of measurement and calibration of devices in the analysis of conductivity and total salinity (salinity) of water.
SKU: 2974626, 2974649
Buffer solution pH 4.01, 125 mL
Calibration solution with standard pH value for pH meters and electrodes.
SKU: LZW9460.99
Calibration solution ph 4.01, 250 mL
Buffer solution with a standard pH value for calibrating and verifying the accuracy of pH electrodes and hydrogen ion meters.
SKU: LZW9463.99
ORP buffer solution for calibration 200 mV, 500 ml
ORP reference solution used to calibrate the ORP sensor (in resealable plastic bottles).
SKU: 25M2A1001-115
51350034 Buffer pH 7.00, 250 ml
Certified pH buffer solution for electrode calibration.
SKU: 51350034
HI7007L buffer solution pH 7.01, volume 500 ml
pH 7.01 is the most widely used value of all buffer solutions.
SKU: HI7007L
Recommended products
Certified Buffer Standard Solution, pH 6,865
Certified Buffer Standard Solution, pH 6,865 ±0.010 pH at 25°C, 500 mL.
SKU: S11M003
30090851 Standard solution 100 mg/l (fluoride)
The standard fluoride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of fluoride ions (F). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of fluoride ions in the sample.
SKU: 30090851
HI700640P Cleaning Solution for Milk Deposits (25 x 20 mL Sachets)
Cleaning solution for electrodes in easy-to-use sachets.
SKU: HI700640P
ORP buffer solution for calibration 200 mV, 500 ml
ORP reference solution used to calibrate the ORP sensor (in resealable plastic bottles).
SKU: 25M2A1001-115
pH Buffer Solution, pH 10.01
pH Buffer Solution, concentration pH 10.01± 0,02, 500 mL.
SKU: 2283649.99
30458274 buffer pH 1.679
Calibration solution with a pH value of 1.679. Bottle 250 ml.
SKU: 30458274
30095313 Rainbow Kit 2 pH Buffer Set, 6 x 250 ml
Set of pH calibration solutions. The package contains pH 4.01/7.00/10.00 buffers, 2 bottles each.
SKU: 30095313
51350100 Pepsin-HCl cleaning solution, 250 ml
Hydrochloric acid solution with pepsin for cleaning electrodes.
SKU: 51350100
30111137 Buffer pH 6.865 sachets 30x20 ml
Sealed sachets with fresh pH buffer solution for single use.
SKU: 30111137
