998 (90) 174-57-84
51344774 Standard solution 1000 mg/l (copper)
SKU: 51344774
Manufacturer: Mettler Toledo
Availability: Order only
The Mettler Toledo Copper Standard Solution 51344774 for Ion Selective Electrodes (ISE) is a solution with an accurately known concentration of copper ions (1000 mg/L Cu). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of copper ions in the sample.
The volume of the bottle is 500 ml.
Specifications Recommended products
Specifications
Specifications
| Type | Standard solutions - one-parameter analysis |
| Parameters | Copper |
| Concentration | 1000 mg/L Cu |
Recommended products
COD standard solution, 300 mg/L O2 (NIST)
COD standard solution, concentration 300 mg/L O2.
SKU: 1218649
Compare
SKU: 227142
30090855 Calcium standard solution 100 mg/l
A pre-mixed solution with an accurately known concentration of calcium (Ca) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090855
Sulfite Equivalent Standard Solution, 5000 mg/L as SO3
Sodium Thiosulfate Standard Solution (0,125 N). For accuracy checks in Sulfite determinations. Concentration: 5000 mg/L as SO3.
SKU: 2267410
Phosphate standard solution, 1 mg/L PO4
Phosphate Standard Solution, concentration 1 mg/L PO4.
SKU: 256949
Sulphate standard solution, 1000 mg/L SO4 (NIST)
Sulphate standard solution, concentration 1000 mg/L SO4.
SKU: 2175749
Addista Mono standard for chlorine cuvette test LCK310
Addista Mono standard for chlorine cuvette test LCK310, concentration 25 - 30 mg/L Cl2.
SKU: LCA310
Sulphuric acid standard solution, 5,25 N
Sulfuric acid standard solution, 5,25 N, 100 mL bottle.
SKU: 244932
30090853 Standard solution 100 mg/l (chloride)
The standard chloride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of chloride ions (Cl⁻). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of chloride ions in the sample.
SKU: 30090853
Quality control standard hardness, low range, 500 mL
Quality control standard hardness, low range, 500 mL.
SKU: 2833449
Addista Mono standard for AOX cuvette test LCK390
Addista Mono standard for AOX cuvette test LCK390, сoncentration depending on the batch, 250 mL bottle.
SKU: LCA390
Reagent kit Amtax sc with standard, for range 0.05-20.0 mg/L NH4-N
LCW865 Reagent Kit for Oline Ammonium Analyzer with Standard Calibration Solutions.
SKU: LCW865
SKU: 1054322511
Iron standard solution, 100 mg/L Fe (NIST)
Iron standard solution, concentration 100 mg/L Fe.
SKU: 1417542
Sodium chloride standard solution, 100 µS/cm (NIST)
Sodium chloride standard solution, concentration 100 µS/cm.
SKU: 2971849
30090859 Ammonium standard solution 1000 mg/l
A pre-mixed solution with an accurately known concentration of ammonium (NH4) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090859
Nitratax control standard, 50 mg/L NO3 (11.3 mg/L NO3-N)
Standard solution for calibration / verification of the Nitratax sc process probe.
SKU: LCW825
Boron standard solution, 1000 mg/L as B (NIST)
Boron standard solution, 1000 mg/L as B (NIST).
SKU: 191442
Nitratax control standard, 400 mg/L NO3 (90.4 mg/L NO3-N)
Standard solution for calibration / verification of the Nitratax sc process probe.
SKU: LCW863
30090860 Ammonium standard solution 100 mg/l
A pre-mixed solution with an accurately known concentration of ammonium (NH4) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090860
Nitratax control standard, 200 mg/L NO3 (45.2 mg/L NO3-N)
Standard solution for calibration / verification of the Nitratax sc process probe.
SKU: LCW827
Sulfuric Acid Standard Solution, 0,04 N
Sulfuric acid standard solution, 0,04 N, 500 ml bottle.
SKU: 2339349
Addista Mono standard for BOD cuvette test LCK555
Addista Mono standard for BOD cuvette test LCK555, concentration 200 mg/L O2.
SKU: LCA555
Sulphuric acid standard solution, 0,020 N, 1 L
Sulphuric acid standard solution, 0,020 N, 1 L bottle.
SKU: 20353
Recommended products
30090853 Standard solution 100 mg/l (chloride)
The standard chloride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of chloride ions (Cl⁻). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of chloride ions in the sample.
SKU: 30090853
ORP buffer solution for calibration, 600 mV
Reference solution for calibration of ORP electrodes (sealed plastic bottle).
SKU: 25M2A1002-115
Quality control standard hardness, low range, 500 mL
Quality control standard hardness, low range, 500 mL.
SKU: 2833449
Potassium Hydroxide Standard Solution, 8,00 N
Potassium hydroxide standard solution, 8,00 N, 500 ml bottle.
SKU: 28249
Boron standard solution, 1000 mg/L as B (NIST)
Boron standard solution, 1000 mg/L as B (NIST).
SKU: 191442
30090855 Calcium standard solution 100 mg/l
A pre-mixed solution with an accurately known concentration of calcium (Ca) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090855
Addista Mono standard for chlorine cuvette test LCK310
Addista Mono standard for chlorine cuvette test LCK310, concentration 25 - 30 mg/L Cl2.
SKU: LCA310
Standard Solution, Manganese, 10 mg/L Mn (NIST), PourRite Ampoules
Used to check the accuracy of the analysis when determining manganese in a water sample.
SKU: 2605820
BOD Standard Solution, 3000 mg/L О2 (NIST)
BOD Standard Solution, concentration 3000 mg/L О2 (NIST).
SKU: 1486610
