998 (90) 174-57-84
51350062 ORP buffer 220 mV/pH7, 6 x 250mL
SKU: 51350062
Manufacturer: Mettler Toledo
Availability: Order only
ORP buffer is a standard solution used to check the accuracy of ORP electrodes (RedOX) and to calibrate them.
The package contains 6 bottles of 250 ml each.
Specifications Recommended products
Specifications
Specifications
| Parameters | ORP (redox potential) |
| Measurement Range | 220 mV |
| Quantity | 6 x 250 mL |
Recommended products
HI7007L buffer solution pH 7.01, volume 500 ml
pH 7.01 is the most widely used value of all buffer solutions.
SKU: HI7007L
Compare
Ammonium Ionic Strength Adjustor (ISA) Powder Pillows, pk/100
Ionic Strength Adjustor (ISA) for Ammonium determinations by Ion Selective Electrode (ISE) method. Powder form prevent from diluting samples. Ideal for low Ammonium level readings. Eliminate most interferences. Pack of 100 powder pillows.
SKU: 2980699
HI7073L Cleansing Solution for Proteins
HI7073L is a solution for cleaning pH electrodes that come into contact with samples containing protein (food, biological samples). The volume of the bottle is 500 ml.
SKU: HI7073L
Certified Conductivity Standard Solution, 25 μS/cm, NaCl, 250 ml
Calibration solution for salt meters (TDS meter) and conductivity meters.
SKU: S51M013
51350096 Conductivity standard 1413 µS/cm, 6 x 250 ml
Solution for calibration and verification of the accuracy of conductometers and conductivity sensors.
SKU: 51350096
51302049 Conductivity standard 1413 µS/cm, sachets 30x20ml
A solution with a standard conductivity value of 1413 µS/cm for calibrating conductivity sensors.
SKU: 51302049
HI70004P pH 4.01 buffer solution for calibration (25 x 20 ml)
HI70004P contains 25 sachets containing 20 ml buffer solution for calibrating pH meters and electrodes.
SKU: HI70004P
51350102 pH electrode cleaning solution (thiourea)
Flushing with deionized water is not sufficient if silver sulfide contamination is present; In this case, it is recommended to use a cleaning solution with thiourea.
SKU: 51350102
51350092 Conductivity standard 1413 µS/cm, 250 ml
Solution for calibration and verification of devices that measure the electrical conductivity of solutions.
SKU: 51350092
51300140 Tablets for preparing solutions with zero dissolved oxygen content
These tablets make it easy to prepare a zero dissolved oxygen solution. The resulting solution is then used to calibrate and verify accuracy when measuring low dissolved oxygen concentrations.
SKU: 51300140
51107872 Electrolyte for DX258-SCN ISE electrode, 20 ml
Electrolyte to ensure stable operation of the DX258-SCN Thiocyanate ion selective electrode and to ensure accurate measurements of the concentration of Thiocyanate ions in solutions.
SKU: 51107872
Calibration solutions for TDS meters 1000 ppm
A solution of Na2SO4, Na2CO3, NaCl for checking the accuracy of instruments when measuring conductivity and total dissolved solids (salt content) of water.
SKU: 2974726, 2974749
30095315 All-in-One Kit 2 6x250 ml
The kit contains 250 ml vials with the following components: technical buffers pH 4.01, pH 7.00, pH 10.00, 3 mol/L KCl electrolyte, cleaning solution (pepsin) and InLab storage solution.
SKU: 30095315
51350072 Electrolyte KCl 3M, 250 ml bottle
Electrolyte for filling electrodes.
SKU: 51350072
51340294 Electrolyte InLab 605, 25 ml bottle
Electrolyte for reference electrodes.
SKU: 51340294
Calibration solution for conductivity meter 147 μS/cm, KCl, 250 ml
Sodium chloride standard solution for checking the accuracy of the conductivity analysis procedure of the aqueous solution and the instrument being measured.
SKU: LZW9700.99
Powder Pillows pH buffer sachets 4.01 (red)
Color-coded powder pH buffer for pH electrode calibration.
SKU: 2226966
Certified Buffer Standard Solution, pH 7,000
Certified Buffer Standard Solution, pH 7,000 ±0.010 pH at 25°C, 500 mL.
SKU: S11M004
ISE standard solution, Fluoride (F-) concentration 100 mg/l; volume 500 ml
Standard Fluoride Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 23249
Buffer Solution, pH 7,00
Buffer Solution, concentration pH 7,00± 0,02, 500 mL.
SKU: 1222249
ISE Ammonia Standard Solution, 100 mg/L, 500 mL
ISE Standard Solution. Ammonia, 100 mg/L ±2 mg/L NH3-N. 500 mL bottle.
SKU: 2406549
Certified Conductivity Standard Solution, 12,85 mS/cm
Calibration solution for conductometers with standard conductivity, concentration 12.85 mS / cm ± 0.5% (k = 2) at 25 ° C, 500 ml.
SKU: S51M002
Singlet Single-use Conductivity Standard Solution, 147 µS/cm
Conductivity Standard Solution. Concentration 147 µS/cm at 25°C ±10% at 25°C. Pack of 20, 20 mL each.
SKU: 2771320
Powder Pillows buffer pH 10.01 (blue), 15 pcs
Sealed bags with powder for pH electrode calibration.
SKU: 2227195
Recommended products
Calibration solution ph 4.01, 250 mL
Buffer solution with a standard pH value for calibrating and verifying the accuracy of pH electrodes and hydrogen ion meters.
SKU: LZW9463.99
ISE standard solution, Fluoride (F-) concentration 100 mg/l; volume 500 ml
Standard Fluoride Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 23249
Certified Buffer Standard Solution, pH 6,865
Certified Buffer Standard Solution, pH 6,865 ±0.010 pH at 25°C, 500 mL.
SKU: S11M003
Ionic Strength Adjustor (ISA) Fluoride, 100 pieces
Ionic Strength Adjustor for Hach Ion Selective Electrodes.
SKU: 258999
1.09475 Buffer solution pH 4.00, red (20 °C)
The red buffer solution (composition: citric acid/sodium hydroxide/hydrogen chloride) is prepared gravimetrically using high-quality reagents in accordance with DIN EN ISO/IEC 17025.
SKU: 1094750500
Singlet Single-Use pH Buffer, pH 10,01
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is 10,01 ±0.02 at 25°C. Pack of 20 of pH 10,01, 20 mL each.
SKU: 2770220
51340031 Electrolyte for DX219-F 20 ml
Electrolyte for ion-selective electrode determining Fluoride ions.
SKU: 51340031
HI7031L KCl solution with a standard conductivity of 1413 µS/cm
The HI7031L is a premium conductivity standard with a conductivity value of 1413 µS/cm, based on a NIST traceable potassium chloride solution.
SKU: HI7031L
RENOVO.N solution for cleaning pH electrodes, pure water samples, 250 ml
Solution for regular cleaning of the sensitive element of a pH electrode.
SKU: S16M001
