A critical element of disinfection is accurate dosing and monitoring of the ClO2 level in the water. Adding chlorine dioxide in the right concentration saves material, protects the environment and the health of the end user of your product. Continuously monitor the chlorine dioxide level in the water with the Hach Lange 9187 sc analyzer.
Products
DR3900 Spectrophotometer without RFID Technology
Split Beam Laboratory VIS Spectrophotometer (320-1100 nm) with over 220 pre-programmed methods optimized for laboratory water analysis.
SKU: LPV440.98.00001
DR6000 UV VIS Spectrophotometer without RFID
The DR6000 is the most advanced laboratory spectrophotometer in the industry. It offers high-speed UV and Visible wavelength scanning and comes with over 250 pre-programmed methods that include the most common testing methods used in water analysis.
SKU: LPV441.99.00001
1200-S sc Digital pH sensor for SC controller
Hach offers a wide range of analog and digital pH and ORP sensors to meet your in-line pH or ORP monitoring needs in water or other liquids.
SKU: LXV426.99.10001
LCK327 Water Hardness cuvette test 1-20° dH
Test kit for determining water hardness, measuring range 1-20 ° dH; 5 - 100 mg / l Ca; 3 - 50 mg / l Mg.
SKU: LCK327
Total Chlorine Reagent Set for chlorine analyser CL17/CL17sc
Hach reagents for the determination of Total Chlorine by DPD in the analysis of drinking, waste and process water, as well as for the control and monitoring of product quality. The volume of reagents is sufficient for 450 tests. Range 0.03 - 5.00 mg / L Cl2 for CL17 and 0.03 - 10.00 mg / L Cl2 for CL17sc.
SKU: 2557000
LCW053 Sulphide reagent set 0.1 - 2.0 mg/L S2-
LCW053 sulphide reagent kit, measuring range 0.01 - 2.0 mg / l S2-.
SKU: LCW053
LCK238 Laton Total Nitrogen cuvette test 5-40 mg/L TN
Test kit for determination of total Nitrogen, measuring range 5-40 mg/L TN.
SKU: LCK238
LCK303 Ammonium cuvette test, 2,0 - 47,0 mg/L NH4-N
Reagent kit LCK303 for the determination of Ammonium, measuring range: 2,0 - 47,0 mg/L NH4-N / 2,5 - 60 mg/L NH4.
SKU: LCK303
LCK340 Nitrate cuvette test, 5 - 35 mg/L NO3-N
Reagent kit for the determination of Nitrate, measuring range 5 - 35 mg/L NO3-N / 22 - 155 mg/L NO3.
SKU: LCK340
DR3900 Spectrophotometer with RFID technology
High-tech VIS spectrophotometer with RFID technology for reliable and traceable measurements in routine laboratory analyzes.
SKU: LPV440.99.00001
LCK138 Laton Total Nitrogen bonded cuvette test 1 - 16 mg/L TNb
Test kit for determination of total Nitrogen bonded, measuring range 1 - 16 mg/L TNb.
SKU: LCK138
LCK614 COD cuvette test, 50 - 300 mg/L O2
Ragents set for COD determination, measuring range 50 - 300 mg/L O2.
SKU: LCK614
LCK329 Copper cuvette test 0,1 - 8,0 mg/L Cu
A set of reagents for the determination of Сopper, measuring range 0,1 - 8,0 mg / L Cu.
SKU: LCK329
Ferrous Iron Reagent Powder Pillows, 0,02 - 3,00 mg/L Fe (II)
Powder Pillows Reagents for Ferrous Iron determination, measuring range 0,02 - 3,00 mg/L Fe (II).
SKU: 103769
Free Chlorine Reagent Powder Pillows, 0,02 - 2,00 mg/L Cl2
Powder Pillows reagents for Free Chlorine determination, measuring range 0,02 - 2,00 mg/L Cl2.
SKU: 2105569
LCK360 Zinc cuvette test, 0,2 - 6,0 mg/L Zn
A set of reagents for the determination of Zinc, measuring range 0,2 - 6,0 mg/L Zn.
SKU: LCK360
LCK320 Iron (II / III) cuvette test 0.2-6.0 mg/L Fe
A set of reagents for the determination of iron (II / III), measuring range 0.2 - 6.0 mg / l Fe.
SKU: LCK320
Ammonia Reagent Set, Powder Pillows, 0,01 - 0,50 mg/L NH3-N
Reagent Set for the determination of Nitrogen, Ammonia (Salicylate Method), measuring range 0,01 - 0,50 mg/L NH3-N.
SKU: 2668000
Total Chlorine Reagent Powder Pillows, 0,02 - 2,00 мг/л Cl2
Powder Pillows reagents for Total Chlorine, Bromine, Iodine determination, measuring range 0,02 - 2,00 mg/L Cl2 / 0,05 - 4,50 mg/L Br2 / 0,07 - 7,00 mg/L I2.
SKU: 2105669
LCK529 Copper trace cuvette test, 0,01 - 1,0 mg/L Cu
A set of reagents for the determination of Сopper traces, measuring range 0,01 - 1,0 mg/L Cu.
SKU: LCK529
LCK321 Iron cuvette test 0,2 - 6,0 mg/L Fe
A set of reagents for the determination of iron, measuring range 0.2 - 6.0 mg / l Fe.
SKU: LCK321
LCK353 Sulphate cuvette test, 150 - 900 mg/L SO4
LCK353 Sulphate cuvette test, measuring range 150 - 900 mg/L SO4.
SKU: LCK353
LCK521 Iron trace cuvette test, 0,01 - 1,0 mg/L Fe
Reagent kit for determination of iron traces, measuring range 0,01 - 1,0 mg / L Fe.
SKU: LCK521
LCK555 BOD5 cuvette test, 4 - 1650 mg/L O2
A set of reagents for the determination of BOD5, measuring range 4 - 1650 mg / L О2.
SKU: LCK555