+998 (90) 174-57-84
Total Chlorine Reagent Set for chlorine analyser CL17/CL17sc
SKU: 2557000
Manufacturer: Hach
Availability: In stock
Total Chlorine Reagent Kit (includes DPD Indicator, Total Chlorine Indicator and Buffers).
Used with the CL17 / CL17sc analyzer and for serial analyzes.
Range 0.03 - 5.00 mg / L Cl2 for CL17 and 0.03 - 10.00 mg / L Cl2 for CL17sc.
Number of tests - 450.
Description Specifications Downloads Recommended products
Description
Description
Quality, Reliability
Hach Free Chlorine Reagent Set (DPD Indicator, Free Chlorine Indicator and Buffer Solutions) is specifically designed and produced to work with Hach CL17 Analyzers.
Simple, Predictable Maintenance
The CL17 is designed to require replacement of reagents on a predictable schedule under typical use. Maintenance can be performed in 15 minutes, and no special tools are required.
Parameter: Chlorine, total
Range: 0.03 - 5.00 mg / L Cl2 for CL17 and 0.03 - 10.00 mg / L Cl2 for CL17sc
Application: water analysis.
Method description: Chlorine can be in water as free available chlorine and as combined available chlorine. Both forms can be in the same water and can be determined together as the total available chlorine. Free chlorine is available as hypochlorous acid and/or hypochlorite ion. Combined chlorine exists as monochloramine, dichloramine, nitrogen trichloride and other chloro derivatives. The combined chlorine oxidizes iodide in the reagent to iodine. The iodine and free chlorine in the sample react with the DPD (N,N-diethyl- pphenylenediamine) indicator to form a pink color, which is proportional to the total chlorine concentration. To determine the concentration of combined chlorine, complete a free chlorine test and a total chlorine test. Subtract the free chlorine results from the results of the total chlorine test to obtain combined chlorine. The measurement wavelength is 530 nm.
Specifications
| Application area | Environmental monitoring, Wastewater, Reagents, Drinking water, Treatment facilities, Laboratory analysis, Process control |
| Type | Liquid reagents |
| Industry | Ecology, Pulp and paper, Power generation, Transport, Chemical, Food and Beverage, Municipal |
| Parameters | Chlorine total |
| Measurement Range | 0.03 - 5.00 mg/L Cl2 (CL17) |
| Compatibility | DR6000, DR3900 |
| Method | DPD |
| Number of tests | 450 |
| Measurement Range (2) | 0.03 - 10.00 mg/L Cl2 (CL17sc) |
| Quality control | 1426810, 2630020 |
Downloads
 |
Chlorine, Total DPD Rapid Liquid Method 10060, Pour-Thru Cell |  |
Recommended products
Lovibond DPD 1 Buffer Solution
Solution for the photometric determination of free/total chlorine in water samples.
SKU: 471010, 471016, 471011
Compare
Manganese Reagent Set, PAN, 0.006-0.700mg/L Mn
Hach reagents for the determination of low manganese concentrations. Range: 0.006 - 0.700 mg / L Mn.
SKU: 2651700
Reagent for PHOSPHAX sc 2 liters
Reagent for the industrial analyzer Hach Lange for the determination of orthophosphates in waste and drinking water.
SKU: LCW869
Solution for determination of free ammonia
It is used to determine the concentration of free ammonia by the Indophenol method.
SKU: 2877436
Nitrification inhibitor for BOD, Trichloromethyl Pyridine (TCMP)
The BOD of carbonaceous compounds (CBOD) can be determined by adding a nitrification inhibitor. The CBOD test is recommended for biologically treated wastewater, biologically treated wastewater and river water samples.
SKU: 253335
Silica Reagent Set, 3 - 1000 µg/L SiO2
Hach reagent kit for the determination of silicon dioxide in the ultra-low range 3 - 1000 μg/l SiO2. The kit is enough for 40 analyzes.
SKU: 2581400
Nessler reagent, 500 ml
For the determination of ammonia and total nitrogen according to Kjeldahl.
SKU: 2119449
Reagent for BioTector 6 N sulfuric acid with Mn catalyst
Container with reagent for process TOC analyzer.
SKU: 2563890, 2038162
Buffer solution Hardness 1, 500 ml.
For hardness determination at pH 10.1 ± 0.1 and 20 °C.
SKU: 42449
FerroZine Iron Reagent Solution, 0.009-1.400mg/L Fe
Hach reagents for the determination of Iron. Range: 0.009 - 1.400 mg / l Fe. Volume 500 ml.
SKU: 230149
Cyclohexanone solution, 100 mL
The solution is used in the determination of zinc.
SKU: 1403332
HydraVer2 Hydrazine reagent solution, 4 - 600 µg/L, 100 mL
Hach reagents for the determination of hydrazine. Range: 4 - 600 μg / L N2H4. A volume of 100 ml is sufficient for 100 tests.
SKU: 179032
Sulfite reagent set 0.1-5.0 mg/L SO3
Hach reagent kit for the determination of Sulfite in the range of 0.1-5.0 mg/l SO3. The kit is enough for 100 analyzes.
SKU: HPT430
Solution for the determination of molybdenum, 50 mL
Determination of molybdenum in the low range by Hach 8169 method.
SKU: 2352512
Phenolphthalein Indicator Solution, 5 g/L, 1 L (APHA)
PH indicator for use in titration.
SKU: 16253
Hardness reagent kit, 4 - 1000 μg/L CaCO3
Determination of ultra-low level of water hardness by the chlorophosphonazo method.
SKU: 2603101
Reagent set for chlorine analyzer CL17sc, ultra low range
The reagent kit includes a total chlorine indicator solution, a total chlorine buffer solution, and a DPD compound.
SKU: 9791100
Phenolphthalein indicator solution; 1 g/L, 15 ml
Solution for use in titration.
SKU: 189736
Chlorine Dioxide Reagent Set, 0.01-1.00 mg/L ClO2
Hach reagents for the determination of chlorine dioxide. The volume of reagents is enough for 100 tests.
SKU: 2242300
CL17sc analyzer optics cleaning solution
The set contains sulfuric acid (100 ml dropper bottle) and cotton swabs (10).
SKU: 8573100
Reagent for BioTector 1.8 N sulfuric acid, 80 mg/l MnSO4
Container with reagent for process TOC analyzer.
SKU: 25255061, 2563889
Reagent kit Amtax sc with standard, for range 10 - 1000 mg/L NH4-N
LCW866 Reagent Kit for Oline Ammonium Analyzer with Standard Calibration Solutions.
SKU: LCW866
Calibration Verification set for chlorine analyzers CL17sc
The kit includes the necessary reagents and accessories to complete the Cl17sc Series Chlorine Analyzer Calibration Check procedure.
SKU: 8568200
Recommended products
Phosphate, ortho, Reagent Set 0.23 - 30.00 mg/L PO4
Hach reagents for the determination of phosphate (ortho). Range: 0.23 - 30.00 mg / l PO4. The reagent volume is sufficient for 100 analyzes.
SKU: 2244100
Reagent for PHOSPHAX sc 2 liters
Reagent for the industrial analyzer Hach Lange for the determination of orthophosphates in waste and drinking water.
SKU: LCW869
Calibration Verification set for chlorine analyzers CL17sc
The kit includes the necessary reagents and accessories to complete the Cl17sc Series Chlorine Analyzer Calibration Check procedure.
SKU: 8568200
Total Trihalomethanes Plus Reagent Set (THM)
Hach reagent kit for the determination of trihalomethanes (THM) in the range of 10 - 600 μg/L CHCl3. The kit is enough to carry out 50 - 99 analyzes.
SKU: 2790800
Reagent kit Amtax sc with standard, for range 10 - 1000 mg/L NH4-N
LCW866 Reagent Kit for Oline Ammonium Analyzer with Standard Calibration Solutions.
SKU: LCW866
FerroZine Iron Reagent Solution, 0.009-1.400mg/L Fe
Hach reagents for the determination of Iron. Range: 0.009 - 1.400 mg / l Fe. Volume 500 ml.
SKU: 230149
Chlorine, liquid DPD reagent set, 0.02-2.00mg/L Cl2
Hach reagents for the determination of Chlorine in the analysis of drinking, waste and process water, as well as for control and monitoring of product quality. The reagent volume is sufficient for approximately 100 tests. Range 0.02 - 2.00 mg/L Cl2
SKU: HPT310
Nitrification inhibitor for BOD, Trichloromethyl Pyridine (TCMP)
The BOD of carbonaceous compounds (CBOD) can be determined by adding a nitrification inhibitor. The CBOD test is recommended for biologically treated wastewater, biologically treated wastewater and river water samples.
SKU: 253335
Reagent A for Phosphax sc LR Analyzer
Reagent for Hach Lange Low Range Orthophosphate Analyzer.
SKU: LCW956
