998 (90) 174-57-84
30111142 InLab Electrode Storage Solution
SKU: 30111142
Manufacturer: Mettler Toledo
Availability: Order only
The pH electrode storage solution is designed to provide optimal storage conditions and keep the electrode in good working condition between uses. Storing the electrode in the correct solution prevents it from drying out, keeps it clean and stable.
Refer to the electrode user manual for the correct solution selection.
The volume of the bottle is 250 ml.
Recommended products
Recommended products
Calibration solutions for TDS meters 300 ppm
The solutions are designed to check the accuracy of measurement and calibration of devices in the analysis of conductivity and total salinity (salinity) of water.
SKU: 2974626, 2974649
Compare
Certified Buffer Standard Solution, pH 6,865
Certified Buffer Standard Solution, pH 6,865 ±0.010 pH at 25°C, 500 mL.
SKU: S11M003
51107885 Electrolyte for DX224-Mg 20 ml
Electrolyte for ion-selective electrode determining Magnesium ions.
SKU: 51107885
HI7041S Electrolyte for Dissolved Oxygen Sensors
The HI7041S electrolyte is designed for Hanna Instruments polarographic dissolved oxygen sensors. The correct filling solution is critical to the performance of your Dissolved Oxygen Sensor.
SKU: HI7041S
51350022 Technical buffer pH 9.21, 6 x 250 ml
pH buffer for calibrating electrodes and pH meters.
SKU: 51350022
51302080 Rainbow II pH Buffer Set
A set of pH calibration solutions in sachets for single use.
SKU: 51302080
Buffer solution pH 4.01, 125 mL
Calibration solution with standard pH value for pH meters and electrodes.
SKU: LZW9460.99
30090847 Standard solution conductivity 1.3 µs/cm
Mettler Toledo 30090847 Conductivity Standard is a high quality reference solution with a known and accurate conductivity value. Used to calibrate and test the performance of meters (conductivity meters) and conductivity sensors.
SKU: 30090847
51343180 Electrolyte KCl 3M 25 ml
Electrolyte for filling the ph electrode.
SKU: 51343180
HI7061L Universal pH Electrode Cleaning Solution (500 ml)
HI7061L is a general purpose cleaning solution for use with pH and ORP electrodes that can be used for a variety of applications.
SKU: HI7061L
pH Buffer Solution, pH 10.01
pH Buffer Solution, concentration pH 10.01± 0,02, 500 mL.
SKU: 2283649.99
Chloride Ionic Strength Adjustor (ISA) Powder Pillows, pk/100
Chloride Ionic Strength Adjustor (ISA) for Chloride determinations by Ion Selective Electrode (ISE) method. Ideal for low Chloride level readings. Pack of 100 powder pillows.
SKU: 2318069
Singlet Single-Use pH Buffer, pH 7,00
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is 7,00 ±0.02 at 25°C. Pack of 20 of pH 7,00, 20 mL each.
SKU: 2770120
Calibration solution for conductivity meter 147 μS/cm, KCl, 125 mL
Solution for calibrating the conductivity meter and checking the accuracy of the analysis.
SKU: LZW9701.99
Conductivity Standard Solution, 12,88 mS/cm
Calibration solution for conductivity meters, concentration 12.88 mS/cm ± 1% at 25 °C / 0.1M KCl, 500 ml.
SKU: C20C250
Certified Buffer Standard Solution, pH 12,45
Certified Buffer Standard Solution, pH 12,45 ±0,05 pH at 25°C, 500 mL.
SKU: S11M008
Powder Pillows buffer pH 10.01 (blue), 15 pcs
Sealed bags with powder for pH electrode calibration.
SKU: 2227195
Filling Solution, Reference, 3 M KCl with AgCl, 28 mL
Filling solution for electrode reference element, Potassium Chloride (KCl) with Saturated AgCl, 3 M, 28 mL bottle.
SKU: 2841700
Certified Conductivity Standard Solution, 111,3 mS/cm
Calibration solution for conductivity and TDS meters, concentration 111.3 mS/cm ± 0.5% (k = 2) at 25 °C, 500 ml.
SKU: S51M001
51344755 PerfectION electrolyte F, 5x60 ml
perfectION Mettler Toledo ion selective electrode filling solution for determining nitrate concentrations.
SKU: 51344755
51350002 Technical Buffer pH 2.00
Calibration solution for pH electrodes with pH value 2.00 ± 0.02
SKU: 51350002
51107875 Electrolyte for DX407-Pb electrode
The electrolyte serves to create a stable and well defined electrochemical environment within the DX407-Pb ion selective electrode.
SKU: 51107875
Calibration solutions for TDS meters 3000 ppm
A solution of Na2SO4, Na2CO3, NaCl for calibrating conductivity meters and the total dissolved solids (salinity) of water.
SKU: 2974826, 2974849
ISE standard sodium solution (Na +) concentration 1000 mg/l; volume 500 ml
Standard Sodium Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 1474949
Recommended products
51107893 Electrolyte for DX226-CN 20 ml
Electrolyte for ion-selective electrode determining Cyanide ions.
SKU: 51107893
51350102 pH electrode cleaning solution (thiourea)
Flushing with deionized water is not sufficient if silver sulfide contamination is present; In this case, it is recommended to use a cleaning solution with thiourea.
SKU: 51350102
HI6007 Calibration solution pH 7.010 ± 0.002 at 25°C
HI6007 is a pH 7.010 +/- 0.002 pH calibration buffer.
SKU: HI6007
HI70300L pH electrode storage solution (500 ml)
HI70300L is an electrode storage solution formulated with chemicals that can be used to keep your pH and ORP electrodes performing optimally. When the pH electrode is stored properly in solution, the glass membrane is well hydrated, which ensures proper functioning and accurate readings.
SKU: HI70300L
Conductivity Standard Solution, 12,88 mS/cm
Calibration solution for conductivity meters, concentration 12.88 mS/cm ± 1% at 25 °C / 0.1M KCl, 500 ml.
SKU: C20C250
HI6031 Conductivity standard 1413 µS/cm (500 ml)
HI6031 is a high quality 1413 µS/cm conductivity standard based on potassium chloride solution. Comes with a certificate of analysis.
SKU: HI6031
30090847 Standard solution conductivity 1.3 µs/cm
Mettler Toledo 30090847 Conductivity Standard is a high quality reference solution with a known and accurate conductivity value. Used to calibrate and test the performance of meters (conductivity meters) and conductivity sensors.
SKU: 30090847
30090851 Standard solution 100 mg/l (fluoride)
The standard fluoride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of fluoride ions (F). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of fluoride ions in the sample.
SKU: 30090851
Certified Conductivity Standard Solution, 1015 µS/cm
Certified solution with standard conductivity, 0.05% sodium chloride (NaCl), concentration 1015 μS/cm ± 0.5% at 25 °C, 500 ml.
SKU: S51M004
