998 (90) 174-57-84
Sulfite reagent set 0.1-5.0 mg/L SO3
SKU: HPT430
Manufacturer: Hach
Availability: Order only
For sulfite determination using method Hach 10308 [5,5'-dithiobis- (2-nitrobenzoic acid) or DTNB]
Range: 0.1-5.0 mg / l SO3.
The volume of reagents is sufficient for 100 analyzes.
Storage conditions: 15 ° C - 25 ° C
Description Specifications Downloads Recommended products
Description
Description
Reagent kit HPT430.
Parameter: Sulfite
Range: 0.1-5.0 mg / l SO3
Applications: For drinking water, waste water, boiler water and foodstuffs.
Method description [Hach 10308]: 5,5'-dithiobis- (2-nitrobenzoic acid) or DTNB reacts with sulfite to form a yellow complex. The measurement wavelength is 435 nm.
Special Notes: For DR 4000, DR 2500, DR 2400 and DR 2010, HACH cell (21228) is required 25x54 mm, 10 ml.
Specifications
| Application area | Wastewater, Reagents, Food production, Drinking water, Brewing, Treatment facilities, Beverages |
| Type | Liquid reagents |
| Industry | Pulp and paper, Pharmaceutical, Power generation, Transport, Chemical, Food and Beverage, Municipal |
| Parameters | Sulfide |
| Measurement Range | 0.1-5.0 mg/L SO3 |
| Compatibility | DR6000, DR1900, DR3900, DR5000, DR2800, DR3800 |
| Method | DTNB |
| Number of tests | 100 |
| Quality control | 2267410 |
Downloads
 |
Sulfite, Colorimetric, DTNB Method 10308 |  |
Recommended products
Volatile Acids Reagent Set, 27-2800mg/L HOAc
Hach reagent kit for the determination of volatile acids in the range of 27 - 2800 mg / l CH₃COOH (acetic acid). The kit is enough for 100 analyzes.
SKU: 2244700
Compare
Solution for determination of free ammonia
It is used to determine the concentration of free ammonia by the Indophenol method.
SKU: 2877436
SKU: 2257249
SKU: 115480
Reagent for BioTector 6 N sulfuric acid with Mn catalyst
Container with reagent for process TOC analyzer.
SKU: 2563890, 2038162
Silica Reagent Set, Rapid Liquid, 3-1000 µg/L SiO2
Hach reagent kit for the determination of silicon dioxide in the ultra-low range 3 - 1000 μg/l SiO2. The kit is enough for 250 analyzes.
SKU: 2678500
SPADNS Fluoride Reagent Solution, 0.02 - 2.00 мг/л F 500 mL
Hach reagents for the determination of Fluoride. Range: 0.02 to 2.00 mg / L. Volume 500 ml.
SKU: 44449
Ferric ion solution
Solution for the colorimetric determination of chlorides in water by the mercury thiocyanate method.
SKU: 2212242
Reagent kit Amtax sc with standard, for range 10 - 1000 mg/L NH4-N
LCW866 Reagent Kit for Oline Ammonium Analyzer with Standard Calibration Solutions.
SKU: LCW866
SKU: 8035280100
Mercury Reagent Set, 0.1-2.5µg/L Hg
Hach reagents for the determination of mercury. Range: 0.1 - 2.5 μg/L Hg. The test kit is enough for 25 tests.
SKU: 2658300
SKU: 245032
Chlorine, liquid DPD reagent set, 0.02-2.00mg/L Cl2
Hach reagents for the determination of Chlorine in the analysis of drinking, waste and process water, as well as for control and monitoring of product quality. The reagent volume is sufficient for approximately 100 tests. Range 0.02 - 2.00 mg/L Cl2
SKU: HPT310
Calibration Verification set for chlorine analyzers CL17sc
The kit includes the necessary reagents and accessories to complete the Cl17sc Series Chlorine Analyzer Calibration Check procedure.
SKU: 8568200
PHOSPHAX sc analyzer cleaning solution
Cleaning solution for the Hach Lange process orthophosphate analyzer.
SKU: LCW870
Standard solution, sodium hydroxide, 0.035 N, 100 ml
Solution for determining the acidity of a water sample.
SKU: 2349332
Total Trihalomethanes Plus Reagent Set (THM)
Hach reagent kit for the determination of trihalomethanes (THM) in the range of 10 - 600 μg/L CHCl3. The kit is enough to carry out 50 - 99 analyzes.
SKU: 2790800
SKU: 8185550100
Manganese Reagent Set, PAN, 0.006-0.700mg/L Mn
Hach reagents for the determination of low manganese concentrations. Range: 0.006 - 0.700 mg / L Mn.
SKU: 2651700
SKU: 193432
SKU: 1.16754.5000
Reagent for BioTector 1.8 N sulfuric acid, 80 mg/l MnSO4
Container with reagent for process TOC analyzer.
SKU: 25255061, 2563889
Reagent kit Amtax sc with standard, for range 0.05-20.0 mg/L NH4-N
LCW865 Reagent Kit for Oline Ammonium Analyzer with Standard Calibration Solutions.
SKU: LCW865
SKU: 2212129
Recommended products
Total Chlorine Reagent Set for chlorine analyser CL17/CL17sc
Hach reagents for the determination of Total Chlorine by DPD in the analysis of drinking, waste and process water, as well as for the control and monitoring of product quality. The volume of reagents is sufficient for 450 tests. Range 0.03 - 5.00 mg / L Cl2 for CL17 and 0.03 - 10.00 mg / L Cl2 for CL17sc.
SKU: 2557000
Nitrification inhibitor for BOD, Trichloromethyl Pyridine (TCMP)
The BOD of carbonaceous compounds (CBOD) can be determined by adding a nitrification inhibitor. The CBOD test is recommended for biologically treated wastewater, biologically treated wastewater and river water samples.
SKU: 253335
Reagent kit Amtax sc with standard, for range 0.05-20.0 mg/L NH4-N
LCW865 Reagent Kit for Oline Ammonium Analyzer with Standard Calibration Solutions.
SKU: LCW865
Manganese Reagent Set, PAN, 0.006-0.700mg/L Mn
Hach reagents for the determination of low manganese concentrations. Range: 0.006 - 0.700 mg / L Mn.
SKU: 2651700
Molybdovanadate Reagent Solution (500mL) 0.3 - 45.0 mg/L PO4
Hach reagents for the determination of phosphate (ortho). Range: 0.3 - 45.0 mg/l PO4. Volume 500 ml. Number of analyzes - 250.
SKU: 2076049
Phenol red indicator solution, 6.5-8.5 pH, 50mL
Standardized for colorimetric pH determination. Specialist. class. Range: pH 6.5-8.5.
SKU: 2657512
SKU: 1.14767.0001
Molybdovanadate Reagent Solution (100 mL) 0.3 - 45.0 mg/L PO4
Hach reagents for the determination of phosphate (ortho). Range: 0.3 - 45.0 mg / l PO4. Volume 100 ml. Number of analyzes - 50.
SKU: 2076032
SKU: 1091411000
