998 (90) 174-57-84
Total Trihalomethanes Plus Reagent Set (THM)
SKU: 2790800
Manufacturer: Hach
Availability: Order only
For determining the total amount of trihalomethanes by the THM Plus ™ method. Method Hach 10132. Used as a screening tool for treatment optimization, to identify areas of high THM in distribution systems and to determine levels of trihalomethanes in drinking water samples.
Range: 10 - 600 μg / L CHCl3.
The reagent kit includes: THM Plus ™ 1, 2, 3 Reagents and THM Plus 4 Powder Reagents for 50–99 tests.
Description Specifications Downloads Recommended products
Description
Description
Reagent kit 2790800.
Parameter: Trihalomethanes (THM)
Range: 10 - 600 μg / L CHCl3
Application: determination of the potential of drinking water, forming trihalomethanes and other disinfection by-products, under the influence of direct chlorination. For water purification processes, water sources or for predicting estimates of THM concentrations in distribution systems. For trihalomethane distribution system modeling (SDS-THM) studies.
Method description [Hach 10224]: Drinking water contains organic matter that reacts with chlorine to form chlorinated organic matter. Some of these chlorinated organics are trihalomethanes or other regulated disinfection by-products. The ability of different raw or treated waters to form disinfection by-products is determined by the addition of chlorine and control of the dosing rate, pH, temperature and contact time. THMs generated under these user-defined conditions are determined by the THM Plus method.
Specifications
| Application area | Reagents, Drinking water, Beverages, Process control |
| Type | Liquid reagents |
| Industry | Pharmaceutical, Chemical, Food and Beverage |
| Parameters | Tannin and Lignin |
| Measurement Range | 10 - 600 μg/L CHCl3 |
| Compatibility | DR6000, DR1900, DR3900 |
| Method | THM Plus |
| Number of tests | 50 - 99 |
Downloads
 |
Trihalomethane Formation Potential (THMFP) THM Plus Method 10224 |  |
Recommended products
Sulfide Reagent Set, 5 - 800 µg/L S2-
Hach reagent kit for the determination of Sulfide 5 - 800 μg / l S2-. The kit is enough for 100 analyzes.
SKU: 2244500
Compare
Hardness Reagent Set, 8-1000 µg/L Ca & Mg as CaCO3
Hach reagents for hardness determination. Range: 8 - 1000 μg / L CaCO3. Number of tests - 100.
SKU: 2603100
Molybdovanadate Reagent Solution (500mL) 0.3 - 45.0 mg/L PO4
Hach reagents for the determination of phosphate (ortho). Range: 0.3 - 45.0 mg/l PO4. Volume 500 ml. Number of analyzes - 250.
SKU: 2076049
Reagent set for the total hardness test kit HA-71A
Replacement reagent kit for determination of total hardness by drop count titration with EDTA using the HA-71A test kit.
SKU: 2437800
Reagent for BioTector 6 N sulfuric acid with Mn catalyst
Container with reagent for process TOC analyzer.
SKU: 2563890, 2038162
SKU: 1.16754.5000
ORP / Redox calibration solution (ZoBell's solution)
Standard solution for calibration and accuracy verification of ORP electrodes.
SKU: 2316949
Lovibond DPD 1 Buffer Solution
Solution for the photometric determination of free/total chlorine in water samples.
SKU: 471010, 471016, 471011
LeadTrak™ Reagent Set, Fast Column Extraction Method
Hach reagents for the determination of lead. Range: 5 - 150 μg/L Pb.
SKU: 2375000
Free Chlorine Reagent Set for chlorine analyser CL17/CL17sc
Hach reagents for the determination of Free Chlorine by DPD in the analysis of drinking, waste and process water, as well as for the control and monitoring of product quality. The volume of reagents is sufficient for 450 tests. Range 0.03 - 5.00 mg / L Cl2 for CL17 and 0.03 - 10.00 mg / L Cl2 for CL17sc.
SKU: 25569-00
Reagent kit Amtax sc with standard, for range 10 - 1000 mg/L NH4-N
LCW866 Reagent Kit for Oline Ammonium Analyzer with Standard Calibration Solutions.
SKU: LCW866
Silica Reagent Set, Rapid Liquid, 3-1000 µg/L SiO2
Hach reagent kit for the determination of silicon dioxide in the ultra-low range 3 - 1000 μg/l SiO2. The kit is enough for 250 analyzes.
SKU: 2678500
Reagent A for Phosphax sc LR Analyzer
Reagent for Hach Lange Low Range Orthophosphate Analyzer.
SKU: LCW956
Chlorine, liquid DPD reagent set, 0.02-2.00mg/L Cl2
Hach reagents for the determination of Chlorine in the analysis of drinking, waste and process water, as well as for control and monitoring of product quality. The reagent volume is sufficient for approximately 100 tests. Range 0.02 - 2.00 mg/L Cl2
SKU: HPT310
Formaldehyde Reagent Set, 3-500 µg/L CH2O
Hach reagents for the determination of Formaldehyde in water. Range: 3-500 μg / L CH2O. Number of tests - 100.
SKU: 2257700
Mercury Reagent Set, 0.1-2.5µg/L Hg
Hach reagents for the determination of mercury. Range: 0.1 - 2.5 μg/L Hg. The test kit is enough for 25 tests.
SKU: 2658300
Phenolphthalein Indicator Solution, 5 g/L, 1 L (APHA)
PH indicator for use in titration.
SKU: 16253
SKU: 115480
Reagent kit Amtax sc with standard, for range 0.05-20.0 mg/L NH4-N
LCW865 Reagent Kit for Oline Ammonium Analyzer with Standard Calibration Solutions.
SKU: LCW865
SKU: 1.04201.0100
Nitrification inhibitor for BOD, Trichloromethyl Pyridine (TCMP)
The BOD of carbonaceous compounds (CBOD) can be determined by adding a nitrification inhibitor. The CBOD test is recommended for biologically treated wastewater, biologically treated wastewater and river water samples.
SKU: 253335
HydraVer2 Hydrazine reagent solution, 4 - 600 µg/L, 100 mL
Hach reagents for the determination of hydrazine. Range: 4 - 600 μg / L N2H4. A volume of 100 ml is sufficient for 100 tests.
SKU: 179032
Chlorine Dioxide Reagent Set, 0.01-1.00 mg/L ClO2
Hach reagents for the determination of chlorine dioxide. The volume of reagents is enough for 100 tests.
SKU: 2242300
SKU: 245032
Recommended products
Reagent set for chlorine analyzer CL17sc, ultra low range
The reagent kit includes a total chlorine indicator solution, a total chlorine buffer solution, and a DPD compound.
SKU: 9791100
Lovibond DPD 1 Buffer Solution
Solution for the photometric determination of free/total chlorine in water samples.
SKU: 471010, 471016, 471011
Phenolphthalein indicator solution; 1 g/L, 15 ml
Solution for use in titration.
SKU: 189736
Silica Reagent Set, Bulk Solution, 3 - 1000 µg/L SiO2
Hach reagent kit for the determination of silicon dioxide in the ultra-low range 3 - 1000 μg / l SiO2. The kit is enough for 100 analyzes.
SKU: 2553500
Phosphate, ortho, Reagent Set 0.23 - 30.00 mg/L PO4
Hach reagents for the determination of phosphate (ortho). Range: 0.23 - 30.00 mg / l PO4. The reagent volume is sufficient for 100 analyzes.
SKU: 2244100
Molybdovanadate Reagent Solution (500mL) 0.3 - 45.0 mg/L PO4
Hach reagents for the determination of phosphate (ortho). Range: 0.3 - 45.0 mg/l PO4. Volume 500 ml. Number of analyzes - 250.
SKU: 2076049
Standard solution, sodium hydroxide, 0.035 N, 100 ml
Solution for determining the acidity of a water sample.
SKU: 2349332
PHOSPHAX sc analyzer cleaning solution
Cleaning solution for the Hach Lange process orthophosphate analyzer.
SKU: LCW870
Silica Reagent Set, 3 - 1000 µg/L SiO2
Hach reagent kit for the determination of silicon dioxide in the ultra-low range 3 - 1000 μg/l SiO2. The kit is enough for 40 analyzes.
SKU: 2581400
