EZ3000 / EZ3001 Ion Selective Ammonium Analyzers
SKU: EZ3000.99001C02, EZ3001.99001C02
Manufacturer: Hach
Availability: Order only
Industrial analyzer for analyzing the concentration of ammonium in water. Direct measurement with combined ion-selective electrode according to the APHA 4500-NH3 (D) standard method.
- EZ3000 - standard measuring range 1 - 10 mg/l NH4-N, 1 stream, Modbus RS485
- EZ3001 - standard measuring range 10 - 100 mg/l NH4-N, 1 stream, Modbus RS485
Various configurations and additional measuring ranges are available on request. Contact us for details.
Description Specifications Recommended products
Description
Description
The concentration of ammonium (NH4+) is determined by intermittent direct measurement using an ion-selective electrode.
The analysis vessel is filled with a fresh sample. ISA [ionic strength adjuster] buffer solution will be added to the sample to adjust the pH. The potential of the sample solution is measured. From this value, the analyzer calculates the ammonium concentration in the sample.
With low maintenance requirements and reduced reagent consumption, the EZ3000 Series is the ideal choice for ammonia analysis where ion selective electrodes are the preferred method.
Unlike standalone electrodes or other analyzers on the market, the EZ3000 Series does not perform continuous measurements. The ISE principle of intermittent analysis not only improves control over the conversion of ion activity to electrical potential, but also eliminates the risk of cross-contamination between runs and reduces overall reagent consumption.
Analytical characteristics:
- Automatic direct ion-selective measurements
- Reduced reagent consumption
- Smart automatic functions
- Standard 4-20mA output with alarm handling
- Communication ports supporting Modbus connectivity
- Control and communication via industrial panel PC
- Multiple stream analysis
Optional measuring ranges:
- EZ3000 - 0.5 - 5 mg/L NH4-N
- EZ3001 - 2.5 - 25 mg/L NH4-N and 5 - 50 mg/L NH4-N;
Specifications for Hach EZ Series ISE Ammonium Analyzers
- Alarms: 1 failure, 4 user configurable, max. 24 V DC / 0.5 A, potential-free contacts
- Ambient temperature: 10 - 30 °C ± 4 °C
- Automatic cleaning: Yes
- Calibration: automatic, 2 points; freely programmable frequency
- Cycle time: 5 minutes
- Demineralized water: for rinsing
- Detection limit: for EZ3000 ≤ 0.5 mg/l; for EZ3001 ≤ 2.5 mg/l
- Digital outputs: Modbus RS485
- Interference from: Volatile amines, fats, oils, proteins, surfactants and tar.
- Power supply: 100 - 240 VAC, 50/60 Hz Max. power consumption: 120 VA
- Reagents: Prepare independently: storage 10 - 30 ° C.
- Sample quality: maximum particle size 100 μm, < 0.1 g/L; Turbidity Sample temperature: 10 - 30 °C
- Weight: 25 kg.
- Manufacturer: AppliTek
Specifications
Application area | Drinking water, Water supply |
Type | Industrial |
Industry | Ecology, Power generation, Municipal |
Parameters | Ammonium |
Measurement Range | 1 - 10 mg/L NH4-N |
Measurement method | ISE |
Measurement Range (2) | 10 - 100 mg/L NH4-N |
Recommended products
EZ5000 Series Alkalinity and Hardness Analyzers
The instrument configuration "Total Hardness + Alkalinity" performs a sequence of two different titration methods: acid-base titration with a combination electrode for alkalinity determination and colorimetric titration for hardness determination in a single titration vessel. Combined measurement of two parameters in one analyzer is a convenient solution for operators and eliminates the need for additional space and the purchase of a second analyzer.
SKU: EZ5004.99001C02
EZ1002 / EZ1003 Ammonium Colorimetric Analyzer
EZ1002 is a colorimetric measurement of ammonium concentration at 630 nm based on the APHA 3500-NH3 standard method (Berthelot). EZ1003 - colorimetric measurement at 450 nm in accordance with EPA Standard Method 350.1 (Nessler).
SKU: EZ1002.99001C02, EZ1003.99001C02
Process COD analyzer EZ7050 / EZ7051 (permanganate method)
The EZ7050 / EZ7051 Chemical Oxygen Demand Analyzers measure O2 concentrations in the range of 1 - 20 mg/L O2 and 20 - 200 mg/L O2, respectively. Titrimetric method.
SKU: EZ7050.990A1C02, EZ7051.990A1C02
Colorimetric Hardness Analyzer Envirolyzer EZ1000 Series
EZ1000 series analyzers use the colorimetric method of analysis: EZ1016 total hardness, EZ1017 calcium hardness, EZ1304 total hardness and calcium hardness, EZ1306 total hardness, calcium and magnesium hardness. Standard measuring range: 0.025 - 1 mg/L CaCO3.
SKU: EZ1016.99001C02
EZ1006 / EZ1007 Free and Total Chlorine Analyzers
The EZ Series online analyzers offer several options for monitoring chlorine in water. Typical applications are drinking water, surface water, process water. The EZ1000 Series analyzers use colorimetric method to measure chlorine. EZ1006 Chlorine free. EZ1007 Chlorine, total. Standard measuring range: 0.025 - 1.5 mg / l Cl2.
SKU: EZ1006.99001C02, EZ1007.99001C02
EZ4003 Free Alkalinity Analyzer
The EZ4003 Free Alkalinity Analyzers use an acid-base titration. Standard range 100 - 2500 mg/l CaCO3.
SKU: EZ4003.99001C02
Industrial titrator - Ammonium Analyzer EZ4005
The EZ4005 ammonium analyzer is a single parameter titrator with a wide measuring range: Standard measuring range: 100 - 5000 mg/L NH4-N.
SKU: EZ4005.99001C02
Process COD analyzer EZ7000 - EZ7004 (dichromate method)
Online titrimetric analyzers of chemical oxygen demand in wastewater. Depending on the model, the EZ700X measures COD in the range of 5 - 10,000 mg/L O2.
SKU: EZ7000.990A1C02
EZ4004 Process Total Alkalinity Analyzer
Online analyzer to determine the total alkalinity of water in real time.
SKU: EZ4004.99001C02
Titrimetric analyzer of total and calcium hardness EZ4043 / EZ4041 / EZ4044
The EZ4000 Series Hardness Analyzers are single parameter titrators: total hardness EZ4043 - Calmagit / EDTA method with a submersible LED probe, standard measurement range: 0.25 - 10 mg/L CaCO3; EZ4041 total hardness; calmagit / EDTA method, standard measurement range: 100 - 1000 mg/L CaCO3; EZ4044 Calcium hardness, standard measuring range: 10 - 1000 mg/L CaCO3.
SKU: EZ4041.99001C02, EZ4043.99001C02, EZ4044.99001C02
Recommended products
EZ4003 Free Alkalinity Analyzer
The EZ4003 Free Alkalinity Analyzers use an acid-base titration. Standard range 100 - 2500 mg/l CaCO3.
SKU: EZ4003.99001C02
Process COD analyzer EZ7000 - EZ7004 (dichromate method)
Online titrimetric analyzers of chemical oxygen demand in wastewater. Depending on the model, the EZ700X measures COD in the range of 5 - 10,000 mg/L O2.
SKU: EZ7000.990A1C02
EZ4004 Process Total Alkalinity Analyzer
Online analyzer to determine the total alkalinity of water in real time.
SKU: EZ4004.99001C02
Process COD analyzer EZ7050 / EZ7051 (permanganate method)
The EZ7050 / EZ7051 Chemical Oxygen Demand Analyzers measure O2 concentrations in the range of 1 - 20 mg/L O2 and 20 - 200 mg/L O2, respectively. Titrimetric method.
SKU: EZ7050.990A1C02, EZ7051.990A1C02
EZ5000 Series Alkalinity and Hardness Analyzers
The instrument configuration "Total Hardness + Alkalinity" performs a sequence of two different titration methods: acid-base titration with a combination electrode for alkalinity determination and colorimetric titration for hardness determination in a single titration vessel. Combined measurement of two parameters in one analyzer is a convenient solution for operators and eliminates the need for additional space and the purchase of a second analyzer.
SKU: EZ5004.99001C02
EZ1006 / EZ1007 Free and Total Chlorine Analyzers
The EZ Series online analyzers offer several options for monitoring chlorine in water. Typical applications are drinking water, surface water, process water. The EZ1000 Series analyzers use colorimetric method to measure chlorine. EZ1006 Chlorine free. EZ1007 Chlorine, total. Standard measuring range: 0.025 - 1.5 mg / l Cl2.
SKU: EZ1006.99001C02, EZ1007.99001C02
Colorimetric Hardness Analyzer Envirolyzer EZ1000 Series
EZ1000 series analyzers use the colorimetric method of analysis: EZ1016 total hardness, EZ1017 calcium hardness, EZ1304 total hardness and calcium hardness, EZ1306 total hardness, calcium and magnesium hardness. Standard measuring range: 0.025 - 1 mg/L CaCO3.
SKU: EZ1016.99001C02
Industrial titrator - Ammonium Analyzer EZ4005
The EZ4005 ammonium analyzer is a single parameter titrator with a wide measuring range: Standard measuring range: 100 - 5000 mg/L NH4-N.
SKU: EZ4005.99001C02
EZ1002 / EZ1003 Ammonium Colorimetric Analyzer
EZ1002 is a colorimetric measurement of ammonium concentration at 630 nm based on the APHA 3500-NH3 standard method (Berthelot). EZ1003 - colorimetric measurement at 450 nm in accordance with EPA Standard Method 350.1 (Nessler).
SKU: EZ1002.99001C02, EZ1003.99001C02