EZ4003 Free Alkalinity Analyzer
SKU: EZ4003.99001C02
Manufacturer: Hach
Availability: Order only
The EZ4003 Free Alkalinity Analyzers use an acid-base titration.
Standard range 100 - 2500 mg/l CaCO3.
Other ranges are available on request: 10 - 500 mg/l CaCO3; 25 - 1250 mg/l CaCO3; 50 - 2500 mg/l CaCO3.
Description Specifications Recommended products
Description
Description
The EZ4000 Series analyzers are single parameter titrators built on an industrial analytical platform. High precision dispensers, rugged peristaltic pumps and carefully engineered fluid paths provide the highest performance for industrial and environmental analyzes.
The determination of the concentration of alkalinity in water is based on acid-base titration using a pH electrode. The sample is titrated with hydrochloric acid (HCl). After determining the end point, the alkalinity concentration is calculated.
The analysis vessel is cleaned and filled with fresh sample. After sampling, the initial pH value is measured. Next, titration with hydrochloric acid (HCl) begins. After determining the end point (pH 8.3), the alkalinity concentration is calculated.
EZ4003.99001C02 Alkalinity Analyzer Specifications
- Ambient temperature: 10 - 30 °C ± 4 °C at 5 - 95% RH (no condensation)
- Calibration: automatic, 2 points; freely programmable frequency
- Cycle time: 10 - 15 minutes
- Demineralized water: for rinsing / diluting
- Detection limit: ≤ 10 mg /l.
- Digital outputs: Modbus RS485
- Flow rate: 100 - 300 ml/min.
- Interference: Soap, oily substances, suspended solids or sediment can coat the glass electrode and cause a delayed reaction. Allow additional time between titrant additions to equilibrate the electrode, or clean the electrodes from time to time.
- Power supply: 100-240 VAC, 50/60 Hz
- Reagent requirements: store between 10 and 30 °C.
- Sample quality: maximum particle size 100 μm, < 0.1 g/l; Turbidity < 50 NTU
- Sample temperature: 10 - 30 °C
- Weight: 25 kg.
Specifications
Application area | Wastewater, Drinking water, Treatment facilities, Equipment for water utilities, Process control |
Type | Industrial |
Industry | Power generation, Food and Beverage, Municipal |
Parameters | Free alkalinity |
Measurement Range | 100 - 5000 mg/L CaCO3 |
Measurement method | Titrimetric |
Recommended products
Colorimetric Hardness Analyzer Envirolyzer EZ1000 Series
EZ1000 series analyzers use the colorimetric method of analysis: EZ1016 total hardness, EZ1017 calcium hardness, EZ1304 total hardness and calcium hardness, EZ1306 total hardness, calcium and magnesium hardness. Standard measuring range: 0.025 - 1 mg/L CaCO3.
SKU: EZ1016.99001C02
EZ1006 / EZ1007 Free and Total Chlorine Analyzers
The EZ Series online analyzers offer several options for monitoring chlorine in water. Typical applications are drinking water, surface water, process water. The EZ1000 Series analyzers use colorimetric method to measure chlorine. EZ1006 Chlorine free. EZ1007 Chlorine, total. Standard measuring range: 0.025 - 1.5 mg / l Cl2.
SKU: EZ1006.99001C02, EZ1007.99001C02
Industrial titrator - Ammonium Analyzer EZ4005
The EZ4005 ammonium analyzer is a single parameter titrator with a wide measuring range: Standard measuring range: 100 - 5000 mg/L NH4-N.
SKU: EZ4005.99001C02
Process COD analyzer EZ7050 / EZ7051 (permanganate method)
The EZ7050 / EZ7051 Chemical Oxygen Demand Analyzers measure O2 concentrations in the range of 1 - 20 mg/L O2 and 20 - 200 mg/L O2, respectively. Titrimetric method.
SKU: EZ7050.990A1C02, EZ7051.990A1C02
EZ5000 Series Alkalinity and Hardness Analyzers
The instrument configuration "Total Hardness + Alkalinity" performs a sequence of two different titration methods: acid-base titration with a combination electrode for alkalinity determination and colorimetric titration for hardness determination in a single titration vessel. Combined measurement of two parameters in one analyzer is a convenient solution for operators and eliminates the need for additional space and the purchase of a second analyzer.
SKU: EZ5004.99001C02
Titrimetric analyzer of total and calcium hardness EZ4043 / EZ4041 / EZ4044
The EZ4000 Series Hardness Analyzers are single parameter titrators: total hardness EZ4043 - Calmagit / EDTA method with a submersible LED probe, standard measurement range: 0.25 - 10 mg/L CaCO3; EZ4041 total hardness; calmagit / EDTA method, standard measurement range: 100 - 1000 mg/L CaCO3; EZ4044 Calcium hardness, standard measuring range: 10 - 1000 mg/L CaCO3.
SKU: EZ4041.99001C02, EZ4043.99001C02, EZ4044.99001C02
EZ4004 Process Total Alkalinity Analyzer
Online analyzer to determine the total alkalinity of water in real time.
SKU: EZ4004.99001C02
Process COD analyzer EZ7000 - EZ7004 (dichromate method)
Online titrimetric analyzers of chemical oxygen demand in wastewater. Depending on the model, the EZ700X measures COD in the range of 5 - 10,000 mg/L O2.
SKU: EZ7000.990A1C02
EZ1002 / EZ1003 Ammonium Colorimetric Analyzer
EZ1002 is a colorimetric measurement of ammonium concentration at 630 nm based on the APHA 3500-NH3 standard method (Berthelot). EZ1003 - colorimetric measurement at 450 nm in accordance with EPA Standard Method 350.1 (Nessler).
SKU: EZ1002.99001C02, EZ1003.99001C02
EZ3000 / EZ3001 Ion Selective Ammonium Analyzers
Industrial analyzer for periodic (discontinuous) analysis of the concentration of ammonium NH4-N in water. Direct measurement with combined ion-selective electrode according to the APHA 4500-NH3 (D) standard method.
SKU: EZ3000.99001C02, EZ3001.99001C02
Recommended products
Colorimetric Hardness Analyzer Envirolyzer EZ1000 Series
EZ1000 series analyzers use the colorimetric method of analysis: EZ1016 total hardness, EZ1017 calcium hardness, EZ1304 total hardness and calcium hardness, EZ1306 total hardness, calcium and magnesium hardness. Standard measuring range: 0.025 - 1 mg/L CaCO3.
SKU: EZ1016.99001C02
Process COD analyzer EZ7050 / EZ7051 (permanganate method)
The EZ7050 / EZ7051 Chemical Oxygen Demand Analyzers measure O2 concentrations in the range of 1 - 20 mg/L O2 and 20 - 200 mg/L O2, respectively. Titrimetric method.
SKU: EZ7050.990A1C02, EZ7051.990A1C02
EZ1002 / EZ1003 Ammonium Colorimetric Analyzer
EZ1002 is a colorimetric measurement of ammonium concentration at 630 nm based on the APHA 3500-NH3 standard method (Berthelot). EZ1003 - colorimetric measurement at 450 nm in accordance with EPA Standard Method 350.1 (Nessler).
SKU: EZ1002.99001C02, EZ1003.99001C02
Industrial titrator - Ammonium Analyzer EZ4005
The EZ4005 ammonium analyzer is a single parameter titrator with a wide measuring range: Standard measuring range: 100 - 5000 mg/L NH4-N.
SKU: EZ4005.99001C02
EZ3000 / EZ3001 Ion Selective Ammonium Analyzers
Industrial analyzer for periodic (discontinuous) analysis of the concentration of ammonium NH4-N in water. Direct measurement with combined ion-selective electrode according to the APHA 4500-NH3 (D) standard method.
SKU: EZ3000.99001C02, EZ3001.99001C02
EZ4004 Process Total Alkalinity Analyzer
Online analyzer to determine the total alkalinity of water in real time.
SKU: EZ4004.99001C02
EZ1006 / EZ1007 Free and Total Chlorine Analyzers
The EZ Series online analyzers offer several options for monitoring chlorine in water. Typical applications are drinking water, surface water, process water. The EZ1000 Series analyzers use colorimetric method to measure chlorine. EZ1006 Chlorine free. EZ1007 Chlorine, total. Standard measuring range: 0.025 - 1.5 mg / l Cl2.
SKU: EZ1006.99001C02, EZ1007.99001C02
EZ5000 Series Alkalinity and Hardness Analyzers
The instrument configuration "Total Hardness + Alkalinity" performs a sequence of two different titration methods: acid-base titration with a combination electrode for alkalinity determination and colorimetric titration for hardness determination in a single titration vessel. Combined measurement of two parameters in one analyzer is a convenient solution for operators and eliminates the need for additional space and the purchase of a second analyzer.
SKU: EZ5004.99001C02
Titrimetric analyzer of total and calcium hardness EZ4043 / EZ4041 / EZ4044
The EZ4000 Series Hardness Analyzers are single parameter titrators: total hardness EZ4043 - Calmagit / EDTA method with a submersible LED probe, standard measurement range: 0.25 - 10 mg/L CaCO3; EZ4041 total hardness; calmagit / EDTA method, standard measurement range: 100 - 1000 mg/L CaCO3; EZ4044 Calcium hardness, standard measuring range: 10 - 1000 mg/L CaCO3.
SKU: EZ4041.99001C02, EZ4043.99001C02, EZ4044.99001C02