+7 (495) 201-53-02
FerroZine Iron Reagent Solution, 0.009-1.400mg/L Fe
SKU: 230149
Manufacturer: Hach
Availability: Order only
For the determination of trace amounts of iron by the ferrozine method.
Hach Method 8147.
Range: 0.009 to 1.40 mg / l.
Volume 500 ml.
The reagent is sufficient for 500 - 1000 analyzes.
Description Specifications Downloads Recommended products
Description
Description
Reagent Hach 230149.
Parameter: Iron (traces)
Range: 0.009 - 1.400 mg/l Fe
Applications: For boiler water, cooling water and natural water.
Method description: FerroZine® reagent forms a purple complex with traces of iron in samples that are buffered to pH 3.5. This method is applicable for the determination of traces of iron in chemicals and glycols. With digestion, this method is also used to analyze samples that contain magnetite (black iron oxide) or ferrites. The measurement wavelength is 562 nm.
Specifications
| Application area | Environmental monitoring, Reagents, Laboratory analysis |
| Type | Liquid reagents |
| Industry | Ecology, Pulp and paper, Power generation, Transport, Chemical, Food and Beverage, Municipal |
| Parameters | Iron |
| Measurement Range | 0.009-1.400 mg/L Fe |
| Compatibility | DR6000, DR1900, DR3900, DR5000, DR2800, DR3800 |
| Method | FerroZine |
| Number of tests | 500 - 1000 |
| Quality control | 1417542 |
Downloads
 |
Iron, Method 8147, FerroZine® Reagent Solution Pillows |  |
Recommended products
PHOSPHAX sc analyzer cleaning solution
Cleaning solution for the Hach Lange process orthophosphate analyzer.
SKU: LCW870
Compare
Reagent for BioTector 6 N sulfuric acid with Mn catalyst
Container with reagent for process TOC analyzer.
SKU: 2563890, 2038162
Reagent kit Amtax sc with standard, for range 10 - 1000 mg/L NH4-N
LCW866 Reagent Kit for Oline Ammonium Analyzer with Standard Calibration Solutions.
SKU: LCW866
Formaldehyde Reagent Set, 3-500 µg/L CH2O
Hach reagents for the determination of Formaldehyde in water. Range: 3-500 μg / L CH2O. Number of tests - 100.
SKU: 2257700
Mercury Reagent Set, 0.1-2.5µg/L Hg
Hach reagents for the determination of mercury. Range: 0.1 - 2.5 μg/L Hg. The test kit is enough for 25 tests.
SKU: 2658300
Powder Pillows copper sulfate solution
Reagent for distillation of phenol.
SKU: 1481866
Solution for determination of free ammonia
It is used to determine the concentration of free ammonia by the Indophenol method.
SKU: 2877436
SPADNS Fluoride Reagent Solution, 0.02 - 2.00 мг/л F 500 mL
Hach reagents for the determination of Fluoride. Range: 0.02 to 2.00 mg / L. Volume 500 ml.
SKU: 44449
Free Chlorine Reagent Set for chlorine analyser CL17/CL17sc
Hach reagents for the determination of Free Chlorine by DPD in the analysis of drinking, waste and process water, as well as for the control and monitoring of product quality. The volume of reagents is sufficient for 450 tests. Range 0.03 - 5.00 mg / L Cl2 for CL17 and 0.03 - 10.00 mg / L Cl2 for CL17sc.
SKU: 25569-00
Reagent kit Amtax sc with standard, for range 0.05-20.0 mg/L NH4-N
LCW865 Reagent Kit for Oline Ammonium Analyzer with Standard Calibration Solutions.
SKU: LCW865
Molybdovanadate Reagent Solution (500mL) 0.3 - 45.0 mg/L PO4
Hach reagents for the determination of phosphate (ortho). Range: 0.3 - 45.0 mg/l PO4. Volume 500 ml. Number of analyzes - 250.
SKU: 2076049
Cobalt / Nickel Reagent Set, PAN Method
For determination of Cobalt and Nickel by the PAN method. Hach Method 8078 (Co) and 8150 (Ni). Range: 0.01 - 2.00 mg/L Co, 0.006 - 1.000 mg/L Ni. Sample Size: 10 mL. Reagent set includes EDTA Reagent Powder Pillows, Phthalate-Phosphate Reagent Powder Pillows, and PAN Indicator Solution (0.3%) for approximately 100 tests.
SKU: 2651600
Solution for the determination of molybdenum, 50 mL
Determination of molybdenum in the low range by Hach 8169 method.
SKU: 2352512
Reagent for BioTector 4.0 N NaOH (sodium hydroxide)
Container (10, 20 liters) with a reagent for an industrial TOC analyzer.
SKU: 2563891, 2038062
Total Trihalomethanes Plus Reagent Set (THM)
Hach reagent kit for the determination of trihalomethanes (THM) in the range of 10 - 600 μg/L CHCl3. The kit is enough to carry out 50 - 99 analyzes.
SKU: 2790800
Chlorine dioxide reagent set 0.02 - 0.50 mg/L ClO2
Hach reagents for the determination of Chlorine Dioxide in the range 0.02 - 0.50 mg / l ClO2. The volume of reagents is enough for 100 tests.
SKU: HPT240
HydraVer2 Hydrazine reagent solution, 4 - 600 µg/L, 100 mL
Hach reagents for the determination of hydrazine. Range: 4 - 600 μg / L N2H4. A volume of 100 ml is sufficient for 100 tests.
SKU: 179032
Sulfide Reagent Set, 5 - 800 µg/L S2-
Hach reagent kit for the determination of Sulfide 5 - 800 μg / l S2-. The kit is enough for 100 analyzes.
SKU: 2244500
Reagent set for chlorine analyzer CL17sc, ultra low range
The reagent kit includes a total chlorine indicator solution, a total chlorine buffer solution, and a DPD compound.
SKU: 9791100
Phenolphthalein Indicator Solution, 5 g/L, 1 L (APHA)
PH indicator for use in titration.
SKU: 16253
Phosphax sc LR reagent kit
Reagent kit for industrial analyzer of orthophosphate concentration in wastewater (contains LCW956 + LCW957).
SKU: LCW955
Reagent kit Amtax sc with standard, for range 1 - 100 mg/L NH4-N
LCW871 Reagent Kit for Oline Ammonium Analyzer with Standard Calibration Solutions.
SKU: LCW871
Nitrification inhibitor for BOD, Trichloromethyl Pyridine (TCMP)
The BOD of carbonaceous compounds (CBOD) can be determined by adding a nitrification inhibitor. The CBOD test is recommended for biologically treated wastewater, biologically treated wastewater and river water samples.
SKU: 253335
Hardness reagent kit, 4 - 1000 μg/L CaCO3
Determination of ultra-low level of water hardness by the chlorophosphonazo method.
SKU: 2603101
Recommended products
Reagent for BioTector 6 N sulfuric acid with Mn catalyst
Container with reagent for process TOC analyzer.
SKU: 2563890, 2038162
Chlorine dioxide reagent set 0.02 - 0.50 mg/L ClO2
Hach reagents for the determination of Chlorine Dioxide in the range 0.02 - 0.50 mg / l ClO2. The volume of reagents is enough for 100 tests.
SKU: HPT240
Phenolphthalein Indicator Solution, 5 g/L, 1 L (APHA)
PH indicator for use in titration.
SKU: 16253
Formaldehyde Reagent Set, 3-500 µg/L CH2O
Hach reagents for the determination of Formaldehyde in water. Range: 3-500 μg / L CH2O. Number of tests - 100.
SKU: 2257700
Molybdovanadate Reagent Solution (500mL) 0.3 - 45.0 mg/L PO4
Hach reagents for the determination of phosphate (ortho). Range: 0.3 - 45.0 mg/l PO4. Volume 500 ml. Number of analyzes - 250.
SKU: 2076049
Solution for the determination of molybdenum, 50 mL
Determination of molybdenum in the low range by Hach 8169 method.
SKU: 2352512
Nitrification inhibitor for BOD, Trichloromethyl Pyridine (TCMP)
The BOD of carbonaceous compounds (CBOD) can be determined by adding a nitrification inhibitor. The CBOD test is recommended for biologically treated wastewater, biologically treated wastewater and river water samples.
SKU: 253335
Solution for determination of free ammonia
It is used to determine the concentration of free ammonia by the Indophenol method.
SKU: 2877436
Standard solution, sodium hydroxide, 0.035 N, 100 ml
Solution for determining the acidity of a water sample.
SKU: 2349332
