998 (90) 174-57-84
51340034 Electrolyte for DX262-NO3 ISE electrode, 20 ml
SKU: 51340034
Manufacturer: Mettler Toledo
Availability: Order only
Electrolyte 51340034 Mettler Toledo is designed to provide stable operation of the DX262-NO3 ion selective electrode and accurate measurements of Nitrate ion concentration in solutions. The volume of the bottle is 20 ml.
The solution also serves to protect the sensitive membrane from contaminants that may change the characteristics of the ion or interfere with its reaction with the membrane.
The right electrolyte ensures the long-term stability of the electrode, which is important for repeatable and accurate measurements.
Recommended products
Recommended products
51350044 Certified buffer pH 7.00, 6 x 250 ml
Solution for pH electrodes calibration.
SKU: 51350044
Compare
Ionic Strength Adjustor Sodium / Potassium (ISA), 100 pieces
Ionic Strength Regulator for Hach Ion Selective Electrodes.
SKU: 4451569
51350046 Buffer pH 9.21, 6 x 250 ml
Solution with a standard pH value of 9.21±0.02
SKU: 51350046
Ionic Strength Adjustor Nitrate (ISA), 100 pieces
Ionic Strength Adjustor for Hach Ion Selective Electrodes.
SKU: 2984799
30464188 pH 5.00 technical buffer solution
Buffer solution with a pH value of 5.00 ± 0.02 for calibrating pH electrodes.
SKU: 30464188
ISE standard sodium solution (Na +) concentration 1000 mg/l; volume 500 ml
Standard Sodium Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 1474949
51343180 Electrolyte KCl 3M 25 ml
Electrolyte for filling the ph electrode.
SKU: 51343180
Powder Pillows buffer pH 10.01 (blue), 15 pcs
Sealed bags with powder for pH electrode calibration.
SKU: 2227195
51302080 Rainbow II pH Buffer Set
A set of pH calibration solutions in sachets for single use.
SKU: 51302080
51344762 PerfectION potassium ISA, 475 ml
Ionic strength adjuster for obtaining accurate readings from an ion-selective electrode that determines the concentration of potassium.
SKU: 51344762
108702 WTW TEP 7: Technical buffer solution, pH 7.00 (1 liter)
Buffer solution for pH meters calibration. Ph value is 7.00
SKU: 108702
51340031 Electrolyte for DX219-F 20 ml
Electrolyte for ion-selective electrode determining Fluoride ions.
SKU: 51340031
Certified Conductivity Standard Solution, 111,3 mS/cm
Calibration solution for conductivity and TDS meters, concentration 111.3 mS/cm ± 0.5% (k = 2) at 25 °C, 500 ml.
SKU: S51M001
Powder Pillows pH buffer sachets 4.01 (red)
Color-coded powder pH buffer for pH electrode calibration.
SKU: 2226966
Calibration solution for conductivity meter 147 μS/cm, KCl, 125 mL
Solution for calibrating the conductivity meter and checking the accuracy of the analysis.
SKU: LZW9701.99
301111389 Buffer pH 10.012 sachets 30x20 ml
Sealed sachets with fresh pH buffer solution for single use.
SKU: 30111139
HI70039P Conductivity Standard 5000 µS/cm (25 x 20 ml sachets)
HI70039P is a premium solution with a conductivity of 5000 µS/cm that complies with NIST standards and comes in convenient disposable sachets.
SKU: HI70039P
Singlet Single-Use pH Buffer, pH 7,00
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is 7,00 ±0.02 at 25°C. Pack of 20 of pH 7,00, 20 mL each.
SKU: 2770120
51350004 pH 4.01 Technical buffer solution
pH buffer with pH value 4.01 ± 0.02 for electrode calibration.
SKU: 51350004
HI70300L pH electrode storage solution (500 ml)
HI70300L is an electrode storage solution formulated with chemicals that can be used to keep your pH and ORP electrodes performing optimally. When the pH electrode is stored properly in solution, the glass membrane is well hydrated, which ensures proper functioning and accurate readings.
SKU: HI70300L
51350098 Conductivity standard 12.88 mS/cm, 6 x 250 ml
Solution for calibration and verification of the accuracy of conductometers and conductivity sensors.
SKU: 51350098
ISE standard solution, nitrate (NO3-N) concentration 10 mg/l; volume 500 ml
Standard Nitrate Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 30749
51344754 PerfectION electrolyte E, 5x60 ml
perfectION Mettler Toledo ion selective electrode filling solution for determining potassium concentrations.
SKU: 51344754
51340032 Electrolyte for DX240-Ca electrode, 20 ml
Electrolyte to ensure stable operation of the DX240-Ca Calcium ion selective electrode and to ensure accurate measurements of the concentration of Calcium ions in solutions.
SKU: 51340032
Recommended products
51302069 Buffer pH 4.01 in sachets 30x20 ml
Disposable pH buffer sachets from Mettler Toledo. The solution is poured into the package under controlled conditions, ensuring a fresh and clean solution for every pH electrode calibration.
SKU: 51302069
51302049 Conductivity standard 1413 µS/cm, sachets 30x20ml
A solution with a standard conductivity value of 1413 µS/cm for calibrating conductivity sensors.
SKU: 51302049
ORP buffer solution for calibration, 600 mV
Reference solution for calibration of ORP electrodes (sealed plastic bottle).
SKU: 25M2A1002-115
Buffer Solution, pH 1,09
Buffer Solution, concentration pH 1,09 ± 0,02, 500 mL.
SKU: S11M009
30090860 Ammonium standard solution 100 mg/l
A pre-mixed solution with an accurately known concentration of ammonium (NH4) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090860
Powder Pillows buffer, pH 10.01 blue 250 pcs.
Standard for the calibration of electrodes. pH buffer in powder for dilution. The color coding is blue.
SKU: 2227164
51344761 PerfectION calcium ISA, 475 ml
Ionic strength adjuster for obtaining accurate readings from an ion-selective electrode that determines the concentration of calcium.
SKU: 51344761
30095314 All-in-One Kit 1 6x250 ml
The kit contains 250 ml vials with the following components: technical buffers pH pH 4.01, pH 7.00, pH 9.21, 3 mol/L KCl electrolyte, cleaning solution (pepsin) and InLab storage solution.
SKU: 30095314
51340294 Electrolyte InLab 605, 25 ml bottle
Electrolyte for reference electrodes.
SKU: 51340294
