998 (90) 174-57-84
HI700640P Cleaning Solution for Milk Deposits (25 x 20 mL Sachets)
SKU: HI700640P
Manufacturer: Hanna Instruments
Availability: Order only
HI700640P is a high performance dairy cleaning solution specially formulated for pH electrodes. The package contains 25 disposable sachets of 20 ml.
Hanna Cleaning Solution removes dirt and deposits that remain on the surface of electrodes when immersed in milk samples during measurement or when stored incorrectly.
Each sachet is stamped with batch number and expiration date and is made from light-blocking material to ensure solution is fresh every time you open it. The Hanna range of cleaning solutions has been specially designed to have a shelf life of 5 years from the date of manufacture when unopened.
Recommended products
Recommended products
51344754 PerfectION electrolyte E, 5x60 ml
perfectION Mettler Toledo ion selective electrode filling solution for determining potassium concentrations.
SKU: 51344754
Compare
ISE standard solution, Fluoride (F-) concentration 1 mg/l; volume 500 ml and 1 liter
Standard Fluoride Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 29149, 29153
HI70007P pH 7.01 Calibration Solution, 25 x 20 ml sachets
Buffer solution with a pH value of 7.01 for calibrating pH meters and electrodes. The package contains 25 sachets with 20 ml of solution.
SKU: HI70007P
Buffer solution, pH 4,01
Buffer Solution, concentration pH 4,01± 0,02, 500 mL.
SKU: 1222349
Buffer solution pH 7.00, 125 mL
Calibration solution for pH meters and electrodes.
SKU: LZW9461.98
51350004 pH 4.01 Technical buffer solution
pH buffer with pH value 4.01 ± 0.02 for electrode calibration.
SKU: 51350004
Certified Conductivity Standard Solution, 1015 µS/cm
Certified solution with standard conductivity, 0.05% sodium chloride (NaCl), concentration 1015 μS/cm ± 0.5% at 25 °C, 500 ml.
SKU: S51M004
Certified Conductivity Standard Solution, 1408 µS/cm
KCl 0.1D Conductivity calibration solution. Concentration 1408 μS/cm ± 0.5% at 25 °C, 500 ml.
SKU: S51M003
Calibration solutions for TDS meters 1000 ppm
A solution of Na2SO4, Na2CO3, NaCl for checking the accuracy of instruments when measuring conductivity and total dissolved solids (salt content) of water.
SKU: 2974726, 2974749
ORP buffer solution for calibration 200 mV, 500 ml
ORP reference solution used to calibrate the ORP sensor (in resealable plastic bottles).
SKU: 25M2A1001-115
Certified Conductivity Standard Solution, 12,85 mS/cm
Calibration solution for conductometers with standard conductivity, concentration 12.85 mS / cm ± 0.5% (k = 2) at 25 ° C, 500 ml.
SKU: S51M002
Conductivity Standard Solution, 12,88 mS/cm
Calibration solution for conductivity meters, concentration 12.88 mS/cm ± 1% at 25 °C / 0.1M KCl, 500 ml.
SKU: C20C250
51350046 Buffer pH 9.21, 6 x 250 ml
Solution with a standard pH value of 9.21±0.02
SKU: 51350046
51350020 Calibration solution pH 7.00, 6 x 250 ml
Buffer solution with a pH value of 7.00 ± 0.02 for calibrating pH meters and electrodes.
SKU: 51350020
Certified Conductivity Standard Solution, 111,3 mS/cm
Calibration solution for conductivity and TDS meters, concentration 111.3 mS/cm ± 0.5% (k = 2) at 25 °C, 500 ml.
SKU: S51M001
30095313 Rainbow Kit 2 pH Buffer Set, 6 x 250 ml
Set of pH calibration solutions. The package contains pH 4.01/7.00/10.00 buffers, 2 bottles each.
SKU: 30095313
Solution 12.88 mS/cm, KCl, 250 mL for conductivity meter calibration
Standard conductivity solution. 12.88 mS/cm ± 0.11 mS/cm @ 25 °C. Potassium chloride (KCl) (0.1 M). Bottle 250 ml.
SKU: LZW9720.99
Conductivity calibration solution 12.88 mS/cm, KCl, 125 mL
Standard conductivity solution. 12.88 mS/cm ± 0.11 mS/cm @ 25 °C. Potassium chloride (KCl) (0.1 M). Bottle 125 ml.
SKU: LZW9721.99
51350086 Electrolyte KNO3 1M; 6 x 250 ml
Solution 51350086 is recommended for use with Mettler Toledo DX Series electrodes for the determination of ammonium, potassium and nitrate.
SKU: 51350086
51340032 Electrolyte for DX240-Ca electrode, 20 ml
Electrolyte to ensure stable operation of the DX240-Ca Calcium ion selective electrode and to ensure accurate measurements of the concentration of Calcium ions in solutions.
SKU: 51340032
51302080 Rainbow II pH Buffer Set
A set of pH calibration solutions in sachets for single use.
SKU: 51302080
30090852 Standard solution 10 mg/l (fluoride)
The standard fluoride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of fluoride ions (F). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of fluoride ions in the sample.
SKU: 30090852
Ionic Strength Adjustor (ISA) Fluoride, 100 pieces
Ionic Strength Adjustor for Hach Ion Selective Electrodes.
SKU: 258999
51344771 Calcium standard solution 1000 mg/l
A pre-mixed solution with an accurately known concentration of calcium (Ca) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 51344771
Recommended products
HI6031 Conductivity standard 84 µS/cm (500 ml)
HI6033 is a high quality 84 µS/cm conductivity standard based on potassium chloride solution. Comes with a certificate of analysis.
SKU: HI6033
Storage solution for pH electrodes, 500 ml
Solution for storing electrodes of pH meters - KCl, KH₂PO₄, Na₂HPO₄, glutaric dialdehyde.
SKU: 2756549
KCl calibration solution for conductivity meter 12890 μS/cm
Calibration solutions are designed to adjust the measurement accuracy of instruments when measuring the electrical conductivity of water.
SKU: 2974426, 2974449
51340034 Electrolyte for DX262-NO3 ISE electrode, 20 ml
Electrolyte to ensure stable operation of the DX262-NO3 Nitrate ion selective electrode and to ensure accurate measurements of the concentration of Nitrate ions in solutions.
SKU: 51340034
108700 WTW TEP 4: Technical buffer solution, pH 4.01 (1 liter)
Buffer solution for pH meters calibration. Ph value is 4.01
SKU: 108700
Certified Buffer Standard Solution, pH 6,865
Certified Buffer Standard Solution, pH 6,865 ±0.010 pH at 25°C, 500 mL.
SKU: S11M003
51340294 Electrolyte InLab 605, 25 ml bottle
Electrolyte for reference electrodes.
SKU: 51340294
Chloride Standard Solution, 1000 mg/L, 500 mL
ISE Standard Solution. Chloride, 1000 mg/L ±10 mg/L Cl- (NIST). 500 mL bottle.
SKU: 18349
ORP calibration solution in ampoules (Light's solution)
Light's solution in ampoules for calibration of ORP meters. The package contains 20 ampoules of 20 ml.
SKU: 2612520
