998 (90) 174-57-84
51344752 PerfectION electrolyte С, 5x60 ml
SKU: 51344752
Manufacturer: Mettler Toledo
Availability: Order only
Solution for filling perfectION Mettler Toledo ion-selective electrodes designed to determine the concentration of Silver ions.
By filling the electrode with the correct and fresh electrolyte, an accurate measurement of the ions is ensured. Maintain the electrolyte level by topping up regularly. When immersing the sensor in the analyzed solution, make sure that the electrolyte level is always higher than the sample level.
Recommended products
Recommended products
51350064 ORP buffer 468 mV/pH 0.1; package 6 x 30 ml
Standard solution for calibrating and checking the accuracy of ORP electrodes.
SKU: 51350064
Compare
ISE standard solution, Fluoride (F-) concentration 1 mg/l; volume 500 ml and 1 liter
Standard Fluoride Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 29149, 29153
ISE standard solution, nitrate (NO3-N) concentration 100 mg/l; volume 500 ml
Standard Nitrate Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 194749
51340031 Electrolyte for DX219-F 20 ml
Electrolyte for ion-selective electrode determining Fluoride ions.
SKU: 51340031
Ammonia Ionic Strength Adjustor (ISA) Powder Pillows, pk/100
Ammonia Ionic Strength Adjustor (ISA) for Ammonia determinations by Ion Selective Electrode (ISE) method. Ideal for low Ammonia level readings. Pack of 100 powder pillows.
SKU: 4447169
51344751 PerfectION electrolyte B, 5x60 ml
perfectION Mettler Toledo ion selective electrode filling solution for determining Cyanide, Chloride, Silver/Sulfide, Lead concentrations.
SKU: 51344751
HI7007L buffer solution pH 7.01, volume 500 ml
pH 7.01 is the most widely used value of all buffer solutions.
SKU: HI7007L
51302069 Buffer pH 4.01 in sachets 30x20 ml
Disposable pH buffer sachets from Mettler Toledo. The solution is poured into the package under controlled conditions, ensuring a fresh and clean solution for every pH electrode calibration.
SKU: 51302069
51350022 Technical buffer pH 9.21, 6 x 250 ml
pH buffer for calibrating electrodes and pH meters.
SKU: 51350022
51350024 Technical buffer pH 10.00, 6 x 250 ml
Buffer solution with a pH value of 10.00 for calibrating pH meters and electrodes.
SKU: 51350024
30095313 Rainbow Kit 2 pH Buffer Set, 6 x 250 ml
Set of pH calibration solutions. The package contains pH 4.01/7.00/10.00 buffers, 2 bottles each.
SKU: 30095313
Electrode cleaning solution, 500 mL
Solution for regular maintenance of Hach Lange pH electrodes.
SKU: 2965249
SKU: HI7072
Conductivity Standard Solution, 12,88 mS/cm
Calibration solution for conductivity meters, concentration 12.88 mS/cm ± 1% at 25 °C / 0.1M KCl, 500 ml.
SKU: C20C250
51350016 Buffer pH 2.00, 6 x 250 ml
Technical buffer solution pH 2.00 ± 0.02. The package contains 6 bottles of 250 ml.
SKU: 51350016
51350046 Buffer pH 9.21, 6 x 250 ml
Solution with a standard pH value of 9.21±0.02
SKU: 51350046
Certified Buffer Standard Solution, pH 1.679
Certified Buffer Standard Solution,1.679 ±0.010 pH at 25°C.
SKU: S11M001
HI700601P Electrode Cleaning Solution (25 sachets x 20 ml)
Cleaning solution for general purpose pH electrodes.
SKU: HI700601P
51107885 Electrolyte for DX224-Mg 20 ml
Electrolyte for ion-selective electrode determining Magnesium ions.
SKU: 51107885
ISE standard solution, Fluoride (F-) concentration 2 mg/l; volume 500 ml
Standard Fluoride Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 40520
30090847 Standard solution conductivity 1.3 µs/cm
Mettler Toledo 30090847 Conductivity Standard is a high quality reference solution with a known and accurate conductivity value. Used to calibrate and test the performance of meters (conductivity meters) and conductivity sensors.
SKU: 30090847
51350074 Electrolyte 3 mol/l KCl saturated AgCl, 250 ml
Solution for filling electrodes Mettler Toledo.
SKU: 51350074
51350010 Buffer pH 10.00, 250 ml
Technical buffer solution for calibration of ph meters and electrodes.
SKU: 51350010
Recommended products
Solution for cleaning pH electrodes from minerals / inorganic samples, 500 ml
Using cleaning solutions will provide faster measurements, improve pH accuracy, and extend the life of the pH meter electrode.
SKU: 2975149
Calibration solution for conductivity meter 1413 µS/cm, KCl, 125 mL
1413 μS/cm conductivity reference solution for calibrating the conductivity meter / cell and verifying the accuracy of the analysis performed.
SKU: LZW9711.99
Certified Buffer Standard Solution, pH 4,005
Certified Buffer Standard Solution, pH 4.005 ±0.010 pH at 25°C, 500 mL.
SKU: S11M002
51344772 Standard solution 1000 mg/l (chloride)
The standard chloride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of chloride ions (Cl⁻). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of chloride ions in the sample.
SKU: 51344772
Conductivity standard solution, 1000 μS/cm, NaCl, 50 ml
NaCl (sodium chloride) standard solution for calibrating conductivity meters and sensors.
SKU: 1440026
ISE Ammonia Standard Solution, 10 mg/L, 500 mL
ISE Standard Solution. Ammonia, 10,0 mg/L ±0,5 mg/L NH3-N. 500 mL bottle.
SKU: 15349
Electrode cleaning solution, 500 mL
Solution for regular maintenance of Hach Lange pH electrodes.
SKU: 2965249
HI7082 electrolyte for pH and ORP electrodes 3.5M KCl (4 x 30 ml)
KCl solution 3.5 M for filling pH and ORP electrodes with a double salt bridge.
SKU: HI7082
51107889 Electrolyte for DX264-Cu electrode
The electrolyte serves to create a stable and well defined electrochemical environment within the DX264-Cu ion selective electrode.
SKU: 51107889
