998 (90) 174-57-84
30090852 Standard solution 10 mg/l (fluoride)
SKU: 30090852
Manufacturer: Mettler Toledo
Availability: Order only
The Mettler Toledo Fluoride Standard Solution 30090852 for Ion Selective Electrodes (ISE) is a solution with an accurately known concentration of fluoride ions (10 mg/L F). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of fluoride ions in the sample.
The volume of the bottle is 500 ml.
Specifications Recommended products
Specifications
Specifications
| Type | Standard solutions - one-parameter analysis |
| Parameters | Fluoride |
| Concentration | 10 mg/L F |
Recommended products
Chlorine standard solution, 50 - 75 mg/L Cl2 (NIST)
Chlorine standard solution, concentration 50 - 75 mg/L Cl2.
SKU: 1426810
Compare
Nitratax control standard, 200 mg/L NO3 (45.2 mg/L NO3-N)
Standard solution for calibration / verification of the Nitratax sc process probe.
SKU: LCW827
51344771 Calcium standard solution 1000 mg/l
A pre-mixed solution with an accurately known concentration of calcium (Ca) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 51344771
Ammonia Standard Solution, 1 mg/L NH3 -N, 500 mL
Ammonia Standard Solution, 1 mg/L NH3 -N, 500 mL bottle.
SKU: 189149
SKU: 227142
51344776 Standard solution for ISE 1000 mg/l I⁻
The iodide standard solution for ion selective electrodes provides accurate reference points for reliable measurements of iodide ion concentrations in samples.
SKU: 51344776
Standard Solution, Manganese, 25 mg/L Mn (NIST), PourRite Ampoules
Used to check the accuracy of the analysis when determining manganese in a water sample.
SKU: 2112820
Iron standard solution, 100 mg/L Fe (NIST)
Iron standard solution, concentration 100 mg/L Fe.
SKU: 1417542
ORP calibration solution in ampoules (Light's solution)
Light's solution in ampoules for calibration of ORP meters. The package contains 20 ampoules of 20 ml.
SKU: 2612520
Sodium chloride standard solution, 10000 µS/cm (NIST)
Sodium chloride standard solution, concentration 10000 µS/cm.
SKU: 2972249
30090859 Ammonium standard solution 1000 mg/l
A pre-mixed solution with an accurately known concentration of ammonium (NH4) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090859
Sulphate standard solution, 50 mg/L SO4 (NIST)
Sulphate standard solution, concentration 50 mg/L SO4.
SKU: 257849
COD standard solution, 300 mg/L O2 (NIST)
COD standard solution, concentration 300 mg/L O2.
SKU: 1218649
BOD Standard Solution, 300 mg/L О2 (NIST)
BOD Standard Solution, concentration 300 mg/L О2 (NIST).
SKU: 1486510
SKU: 1054322511
30090853 Standard solution 100 mg/l (chloride)
The standard chloride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of chloride ions (Cl⁻). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of chloride ions in the sample.
SKU: 30090853
Standard solution, manganese, 100 mL
Standard solution, manganese, 100 mL. Concentration: 1000 mg/L as Mn (NIST). For accuracy checks in manganese determinations (HNO3 matrix).
SKU: 1279142
Chromium, trivalent, standard solution, 50 mg/L Cr3 + (NIST), 100 ml
Solution for checking the accuracy of the analysis when determining the concentration of total chromium.
SKU: 1415142
Reagent kit Amtax sc with standard, for range 0.02 - 5 mg/L NH4-N
A set of reagents with standard solutions for calibration.
SKU: LCW889
51344775 Standard solution 1000 mg/l (fluoride)
The standard fluoride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of fluoride ions (F). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of fluoride ions in the sample.
SKU: 51344775
Standard solution, zinc, 100 mg/L as Zn (NIST), 100 mL
Standard solution, zinc. For accuracy checks in zinc determinations. Concentration: 100 mg/L as Zn (NIST).
SKU: 237842
Phosphate Standard Solution, 15 mg/L PO4 (NIST)
Phosphate Standard Solution, concentration 15 mg/L PO4.
SKU: 1424342
30090854 Standard solution 10 mg/l (chloride)
The standard chloride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of chloride ions (Cl⁻). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of chloride ions in the sample.
SKU: 30090854
ORP buffer solution for calibration, 600 mV
Reference solution for calibration of ORP electrodes (sealed plastic bottle).
SKU: 25M2A1002-115
Recommended products
Sulphuric acid standard solution, 0,035 N, 100 mL
Sulphuric acid standard solution, 0,035 N, 100 mL marked drpping bottle (MDB).
SKU: 2349732
Copper standard solution, 100 mg/L as Cu, 100 mL
Copper standard solution, 100 mg/L as Cu (NIST), 100 mL.
SKU: 12842
BOD Standard Solution, 300 mg/L О2 (NIST)
BOD Standard Solution, concentration 300 mg/L О2 (NIST).
SKU: 1486510
Sulfuric Acid Standard Solution, 0,04 N
Sulfuric acid standard solution, 0,04 N, 500 ml bottle.
SKU: 2339349
Sodium chloride standard solution, 100 µS/cm (NIST)
Sodium chloride standard solution, concentration 100 µS/cm.
SKU: 2971849
ORP buffer solution for calibration, 600 mV
Reference solution for calibration of ORP electrodes (sealed plastic bottle).
SKU: 25M2A1002-115
Chromium, trivalent, standard solution, 50 mg/L Cr3 + (NIST), 100 ml
Solution for checking the accuracy of the analysis when determining the concentration of total chromium.
SKU: 1415142
Ammonia Standard Solution, 1 mg/L NH3 -N, 500 mL
Ammonia Standard Solution, 1 mg/L NH3 -N, 500 mL bottle.
SKU: 189149
ORP buffer solution for calibration 200 mV, 500 ml
ORP reference solution used to calibrate the ORP sensor (in resealable plastic bottles).
SKU: 25M2A1001-115
