+7 (495) 201-53-02
A critical element of disinfection is accurate dosing and monitoring of the ClO2 level in the water. Adding chlorine dioxide in the right concentration saves material, protects the environment and the health of the end user of your product. Continuously monitor the chlorine dioxide level in the water with the Hach Lange 9187 sc analyzer.
Dissolved Oxygen in Beer
The control of oxygen at all stages is an important and integral part of the beer production process. AquaAnalytics specialists have many years of experience working with breweries of various sizes, which allows them to detect even hidden defects and find solutions to the most complex problems.
Products
DR3900 Spectrophotometer without RFID Technology
Split Beam Laboratory VIS Spectrophotometer (320-1100 nm) with over 220 pre-programmed methods optimized for laboratory water analysis.
SKU: LPV440.98.00001
Compare
LCK014, COD cuvette test 1000 - 10000 mg/L O2
COD reagent kit, measuring range 1000 - 10000 mg/L O2.
SKU: LCK014
SC200 Digital 2-channel controller
HACH LANGE is a recognized leader in water analysis solutions. More than 40 different analog and digital sensors can be combined with the SC 200. Thanks to its robust metal housing, the SC 200 is suitable for industrial applications.
SKU: LXV404.99.00551
LCK1414, COD cuvette test 5 - 60 mg/L O2
COD reagent kit, measuring range 5 - 60 mg/L O2.
SKU: LCK1414
Dual input meter HQ40D with dissolved oxygen probe LDO101 + conductivity cell CDC401
Portable two-channel multi-parameter device HQ40D for measuring pH, ORP, conductivity, TDS, resistivity, salinity, dissolved oxygen and BOD complete with laboratory sensor for dissolved oxygen LDO101 and conductivity sensor CDC401, cable length 1 m.
SKU: HQ40D.99.201301
TL2300 Tungsten Lamp Turbidimeter, EPA, 0 - 4000 NTU
The new TL23 Series laboratory turbidity meters combine proven technology and advanced features to simplify industrial and wastewater analysis. Model - TL2300 EPA. Light source: tungsten lamp. Measurement method: nephelometric. Measuring range: 0 - 4000 NTU.
SKU: LPV444.99.00210
HQ40D Dual Channel Meter with Conductivity Cell CDC401 + PHC Series pH Electrode
Portable two-channel multi-parameter device HQ40D for measuring pH, ORP, conductivity, TDS, resistivity, salinity, dissolved oxygen and BOD complete with conductivity sensor CDC401 and pH electrode of the PHC series with various cable lengths and in various designs.
SKU: HQ40D.99.101201
DR6000 UV VIS Spectrophotometer without RFID
The DR6000 is the most advanced laboratory spectrophotometer in the industry. It offers high-speed UV and Visible wavelength scanning and comes with over 250 pre-programmed methods that include the most common testing methods used in water analysis.
SKU: LPV441.99.00001
HQ30D Digital multi meter kit, with Dissolved Oxygen Sensor LDO101
The HQ30D is a handheld, single-channel meter for measuring pH, ORP, conductivity, TDS, resistivity, salinity and dissolved oxygen. This kit - HQ30D device + LDO101 dissolved oxygen sensor, cable length 1 m; 3m; 5 m; 10 m; 15 m; 30m.
SKU: HQ30D.99.301000
HQ30D Portable Single Input Multi-Parameter Meter with pH Electrode PHC201
The HQ30D is a handheld, single-channel meter for measuring pH, ORP, conductivity, TDS, resistivity, salinity and dissolved oxygen. This set - HQ30D device + pH electrode PHC201, cable length 1 m; 3m.
SKU: HQ30D.99.121000
LCK327 Water Hardness cuvette test 1-20° dH
Test kit for determining water hardness, measuring range 1-20 ° dH; 5 - 100 mg / l Ca; 3 - 50 mg / l Mg.
SKU: LCK327
HQ11D Portable Digital Single Channel pH Meter
Digital electrochemistry with HQD. Portable pH / ORP meter. Basic device without electrodes. The digital measuring / electrode system combines reliability, flexibility and ease of use. The replaceable INTELLICAL electrodes are automatically recognized and store all the necessary data. The robust sensor designs with various cable lengths allow measurements in hard-to-reach locations.
SKU: HQ11D.99.000000
HQ30D Portable Single Input Multi-Parameter Meter with pH Electrode PHC301
The HQ30D is a handheld, single-channel meter for measuring pH, ORP, conductivity, TDS, resistivity, salinity and dissolved oxygen. This set - HQ30D instrument + PHC301 refillable pH electrode, cable length 1 m; 3m.
SKU: HQ30D.99.151000
Ammonia Reagent Set, Powder Pillows, 0,01 - 0,50 mg/L NH3-N
Reagent Set for the determination of Nitrogen, Ammonia (Salicylate Method), measuring range 0,01 - 0,50 mg/L NH3-N.
SKU: 2668000
1200-S sc Digital pH sensor for SC controller
Hach offers a wide range of analog and digital pH and ORP sensors to meet your in-line pH or ORP monitoring needs in water or other liquids.
SKU: LXV426.99.10001
LCK138 Laton Total Nitrogen bonded cuvette test 1 - 16 mg/L TNb
Test kit for determination of total Nitrogen bonded, measuring range 1 - 16 mg/L TNb.
SKU: LCK138
LCK303 Ammonium cuvette test, 2,0 - 47,0 mg/L NH4-N
Reagent kit LCK303 for the determination of Ammonium, measuring range: 2,0 - 47,0 mg/L NH4-N / 2,5 - 60 mg/L NH4.
SKU: LCK303
Orbisphere 410 Controller for Ozone O3 Sensor
The ORBISPHERE high precision instrument is designed to measure ozone concentration.
SKU: 410C/W1C00000
HQ30D Single Channel Meter with Dissolved Oxygen probe LDO101 + PHC Series pH Electrode
Portable single channel meter for measuring pH, ORP, conductivity, TDS, resistivity, salinity and dissolved oxygen. Device with pH electrode of the PHC series and standard LDO dissolved oxygen sensor with various cable lengths and in various versions (field / laboratory).
SKU: HQ30D.99.101301
Iron Reagent Powder Pillows, 0,02 - 3,00 mg/L Fe
Powder Pillows Reagents for Iron determination, measuring range 0,02 - 3,00 mg/L Fe.
SKU: 2105769
103635 WTW pH electrode SenTix 41 with temperature sensor
Standard electrode with gel electrolyte and built-in temperature sensor for measuring pH in the laboratory and in the field.
SKU: 103635
Free Chlorine Reagent Powder Pillows, 0,02 - 2,00 mg/L Cl2
Powder Pillows reagents for Free Chlorine determination, measuring range 0,02 - 2,00 mg/L Cl2.
SKU: 2105569
TL2310 LED Turbidimeter, ISO, 0 - 1000 NTU
The new TL23 Series laboratory turbidity meters combine proven technology and advanced features to simplify industrial and wastewater analysis. Model TL2310 ISO. Light source: light-emitting diode (LED). Measurement method: nephelometric. Measurement range: 0 - 1000 NTU.
SKU: LPV444.99.00120
HQ30D Portable Single Input Multi-Parameter Meter with Conductivity Cell CDC401
The HQ30D is a handheld, single-channel meter for measuring pH, ORP, conductivity, TDS, resistivity, salinity and dissolved oxygen. This kit - HQ30D device + CDC401 conductivity sensor, cable length 1 m; 3m; 5 m; 10 m.
SKU: HQ30D.99.201000
