A critical element of disinfection is accurate dosing and monitoring of the ClO2 level in the water. Adding chlorine dioxide in the right concentration saves material, protects the environment and the health of the end user of your product. Continuously monitor the chlorine dioxide level in the water with the Hach Lange 9187 sc analyzer.
Products
DR3900 Spectrophotometer without RFID Technology
Split Beam Laboratory VIS Spectrophotometer (320-1100 nm) with over 220 pre-programmed methods optimized for laboratory water analysis.
SKU: LPV440.98.00001
LCK014, COD cuvette test 1000 - 10000 mg/L O2
COD reagent kit, measuring range 1000 - 10000 mg/L O2.
SKU: LCK014
SC200 Digital 2-channel controller
HACH LANGE is a recognized leader in water analysis solutions. More than 40 different analog and digital sensors can be combined with the SC 200. Thanks to its robust metal housing, the SC 200 is suitable for industrial applications.
SKU: LXV404.99.00551
LCK1414, COD cuvette test 5 - 60 mg/L O2
COD reagent kit, measuring range 5 - 60 mg/L O2.
SKU: LCK1414
TL2300 Tungsten Lamp Turbidimeter, EPA, 0 - 4000 NTU
The new TL23 Series laboratory turbidity meters combine proven technology and advanced features to simplify industrial and wastewater analysis. Model - TL2300 EPA. Light source: tungsten lamp. Measurement method: nephelometric. Measuring range: 0 - 4000 NTU.
SKU: LPV444.99.00210
Dual input meter HQ40D with dissolved oxygen probe LDO101 + conductivity cell CDC401
Portable two-channel multi-parameter device HQ40D for measuring pH, ORP, conductivity, TDS, resistivity, salinity, dissolved oxygen and BOD complete with laboratory sensor for dissolved oxygen LDO101 and conductivity sensor CDC401, cable length 1 m.
SKU: HQ40D.99.201301
DR6000 UV VIS Spectrophotometer without RFID
The DR6000 is the most advanced laboratory spectrophotometer in the industry. It offers high-speed UV and Visible wavelength scanning and comes with over 250 pre-programmed methods that include the most common testing methods used in water analysis.
SKU: LPV441.99.00001
LCK350 Phosphate Ortho/Total cuvette test 2,0 - 20,0 mg/L PO4-P
Phosphate reagent kit (Ortho/Total), measuring range 2,0 - 20,0 mg/L PO4-P.
SKU: LCK350
Total Chlorine Reagent Set for chlorine analyser CL17/CL17sc
Hach reagents for the determination of Total Chlorine by DPD in the analysis of drinking, waste and process water, as well as for the control and monitoring of product quality. The volume of reagents is sufficient for 450 tests. Range 0.03 - 5.00 mg / L Cl2 for CL17 and 0.03 - 10.00 mg / L Cl2 for CL17sc.
SKU: 2557000
Ferrous Iron Reagent Powder Pillows, 0,02 - 3,00 mg/L Fe (II)
Powder Pillows Reagents for Ferrous Iron determination, measuring range 0,02 - 3,00 mg/L Fe (II).
SKU: 103769
3M Clean-Trace UXL100, ATP surface test 100 per case
The 3M Clean-Trace UXL100 ATP test is a single-use device containing a swab for sampling from a surface. The swab is pre-wetted to facilitate sample collection and handling.
SKU: UXL100, 3M ID 7100067519, UPC 04054596160729
Sulphate Reagent Powder Pillows, 2 - 70 mg/L SO4
Powder Pillows Reagents for Sulphate determination, measuring range 2 - 70 mg/L SO4.
SKU: 2106769
LCK320 Iron (II / III) cuvette test 0.2-6.0 mg/L Fe
A set of reagents for the determination of iron (II / III), measuring range 0.2 - 6.0 mg / l Fe.
SKU: LCK320
LCK348 Phosphate Ortho/Total cuvette test 0,5 - 5,0 mg/L PO4-P
Phosphate reagent kit (Ortho/Total), measuring range 0,5 - 5,0 mg/L PO4-P.
SKU: LCK348
LCK329 Copper cuvette test 0,1 - 8,0 mg/L Cu
A set of reagents for the determination of Сopper, measuring range 0,1 - 8,0 mg / L Cu.
SKU: LCK329
LCK321 Iron cuvette test 0,2 - 6,0 mg/L Fe
A set of reagents for the determination of iron, measuring range 0.2 - 6.0 mg / l Fe.
SKU: LCK321
LCK305 Ammonium cuvette test, 1 - 12 mg/L NH4-N
Reagent kit LCK305 for the determination of Ammonium, measuring range 1 - 12 mg/L NH4-N.
SKU: LCK305
LCK360 Zinc cuvette test, 0,2 - 6,0 mg/L Zn
A set of reagents for the determination of Zinc, measuring range 0,2 - 6,0 mg/L Zn.
SKU: LCK360
Free Chlorine Reagent Set for chlorine analyser CL17/CL17sc
Hach reagents for the determination of Free Chlorine by DPD in the analysis of drinking, waste and process water, as well as for the control and monitoring of product quality. The volume of reagents is sufficient for 450 tests. Range 0.03 - 5.00 mg / L Cl2 for CL17 and 0.03 - 10.00 mg / L Cl2 for CL17sc.
SKU: 25569-00
LCK521 Iron trace cuvette test, 0,01 - 1,0 mg/L Fe
Reagent kit for determination of iron traces, measuring range 0,01 - 1,0 mg / L Fe.
SKU: LCK521
Optical point for M1100 and K1100 dissolved oxygen sensors
Replacement ortical spot for Orbisphere dissolved oxygen sensors.
SKU: M1100-L, M1100-H
LCK614 COD cuvette test, 50 - 300 mg/L O2
Ragents set for COD determination, measuring range 50 - 300 mg/L O2.
SKU: LCK614
LCK529 Copper trace cuvette test, 0,01 - 1,0 mg/L Cu
A set of reagents for the determination of Сopper traces, measuring range 0,01 - 1,0 mg/L Cu.
SKU: LCK529
Free Chlorine Reagent Powder Pillows, 0,02 - 2,00 mg/L Cl2
Powder Pillows reagents for Free Chlorine determination, measuring range 0,02 - 2,00 mg/L Cl2.
SKU: 2105569