998 (90) 174-57-84
30090860 Ammonium standard solution 100 mg/l
SKU: 30090860
Manufacturer: Mettler Toledo
Availability: Order only
Pre-mixed solution 30090860 from Mettler Toledo with a well-known ammonium concentration of 100 mg/l NH4, commonly used to calibrate and verify the accuracy of ion selective electrodes.
The volume of the bottle is 500 ml.
Specifications Recommended products
Specifications
Specifications
| Type | Standard solutions - one-parameter analysis |
| Parameters | Ammonium |
| Concentration | 100 mg/L NH4 |
| Quantity |
Recommended products
Phosphate standard solution, 1 mg/L PO4
Phosphate Standard Solution, concentration 1 mg/L PO4.
SKU: 256949
Compare
Fluoride Standard Solution, 1 mg/L F
Standard Solution. Fluoride, 1.00 mg/L ±0.02 mg/L F- (NIST). 1 L bottle.
SKU: 29153
Nitratax control standard, 200 mg/L NO3 (45.2 mg/L NO3-N)
Standard solution for calibration / verification of the Nitratax sc process probe.
SKU: LCW827
Sulphuric acid standard solution, 5,25 N
Sulfuric acid standard solution, 5,25 N, 100 mL bottle.
SKU: 244932
51344772 Standard solution 1000 mg/l (chloride)
The standard chloride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of chloride ions (Cl⁻). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of chloride ions in the sample.
SKU: 51344772
51344776 Standard solution for ISE 1000 mg/l I⁻
The iodide standard solution for ion selective electrodes provides accurate reference points for reliable measurements of iodide ion concentrations in samples.
SKU: 51344776
ORP buffer solution for calibration 200 mV, 500 ml
ORP reference solution used to calibrate the ORP sensor (in resealable plastic bottles).
SKU: 25M2A1001-115
Chlorine standard solution, 25 - 30 mg/L Cl2 (NIST)
Chlorine standard solution, concentration 25 - 30 mg/L Cl2.
SKU: 2630020
Sulphate standard solution, 50 mg/L SO4 (NIST)
Sulphate standard solution, concentration 50 mg/L SO4.
SKU: 257849
30090851 Standard solution 100 mg/l (fluoride)
The standard fluoride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of fluoride ions (F). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of fluoride ions in the sample.
SKU: 30090851
Reagent kit Amtax sc with standard, for range 0.02 - 5 mg/L NH4-N
A set of reagents with standard solutions for calibration.
SKU: LCW889
COD standard solution, 300 mg/L O2 (NIST)
COD standard solution, concentration 300 mg/L O2.
SKU: 1218649
Boron standard solution, 1000 mg/L as B (NIST)
Boron standard solution, 1000 mg/L as B (NIST).
SKU: 191442
Standard solution, zinc, 100 mg/L as Zn (NIST), 100 mL
Standard solution, zinc. For accuracy checks in zinc determinations. Concentration: 100 mg/L as Zn (NIST).
SKU: 237842
Standard Solution, Manganese, 25 mg/L Mn (NIST), PourRite Ampoules
Used to check the accuracy of the analysis when determining manganese in a water sample.
SKU: 2112820
Reagent kit Amtax sc with standard, for range 0.05-20.0 mg/L NH4-N
LCW865 Reagent Kit for Oline Ammonium Analyzer with Standard Calibration Solutions.
SKU: LCW865
Addista Mono standard for AOX cuvette test LCK390
Addista Mono standard for AOX cuvette test LCK390, сoncentration depending on the batch, 250 mL bottle.
SKU: LCA390
Silver, standard solution, 1000 mg/L as Ag (NIST)
Silver standard solution, 1000 mg/L as Ag (NIST).
SKU: 1461342
30090855 Calcium standard solution 100 mg/l
A pre-mixed solution with an accurately known concentration of calcium (Ca) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090855
Nitratax control standard, 100 mg/L NO3 (22.6 mg/L NO3-N)
Standard solution for calibration / verification of the Nitratax sc process probe.
SKU: LCW826
Sulphate standard solution, 1000 mg/L SO4 (NIST)
Sulphate standard solution, concentration 1000 mg/L SO4.
SKU: 2175749
51344775 Standard solution 1000 mg/l (fluoride)
The standard fluoride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of fluoride ions (F). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of fluoride ions in the sample.
SKU: 51344775
Nitratax control standard, 400 mg/L NO3 (90.4 mg/L NO3-N)
Standard solution for calibration / verification of the Nitratax sc process probe.
SKU: LCW863
Sulphuric acid standard solution, 0,020 N, 1 L
Sulphuric acid standard solution, 0,020 N, 1 L bottle.
SKU: 20353
Recommended products
Sulphuric acid standard solution, 0,020 N, 1 L
Sulphuric acid standard solution, 0,020 N, 1 L bottle.
SKU: 20353
COD standard solution, 300 mg/L O2 (NIST)
COD standard solution, concentration 300 mg/L O2.
SKU: 1218629
Addista Mono standard for BOD cuvette test LCK555
Addista Mono standard for BOD cuvette test LCK555, concentration 200 mg/L O2.
SKU: LCA555
Addista Mono standard for AOX cuvette test LCK390
Addista Mono standard for AOX cuvette test LCK390, сoncentration depending on the batch, 250 mL bottle.
SKU: LCA390
51344772 Standard solution 1000 mg/l (chloride)
The standard chloride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of chloride ions (Cl⁻). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of chloride ions in the sample.
SKU: 51344772
Phosphate standard solution, 1 mg/L PO4
Phosphate Standard Solution, concentration 1 mg/L PO4.
SKU: 256949
Ammonia Standard Solution, 100 mg/L NH3-N, 500 mL
Ammonia Standard Solution, 100 mg/L NH3-N, 500 mL bottle.
SKU: 2406549
Sodium chloride standard solution, 1000 µS/cm (NIST)
Sodium chloride standard solution, concentration 1000 µS/cm.
SKU: 1440042
Addista Surfactants standard for LCK333 1g/L TRITON x 100
Addista Surfactants standard for LCK333, concentration 1g/L TRITON x 100.
SKU: LCA333
