+998 (90) 174-57-84
STPL-WRT test kit for wastewater analysis
SKU: 188703
Manufacturer: Hach
Availability: Order only
Includes: seven reagents, measuring tube, bottle, clippers, viewing tubes, stoppers, color comparator block, copper siphon tube for dissolved oxygen determination, thermometer, BOD bottle, Imhoff funnel and stand, cone brush, latex tubes, graduated cylinder , color discs, instructions and carrying case.
Description Specifications Recommended products
Description
Description
Wastewater treatment plant operators are required to perform basic process control analyzes at multiple points within the wastewater treatment facility. On-site testing and fast results can help optimize and understand changes in the water treatment process. Using titration and colorimetry methods, the Hach STPL-WRT Test Kit monitors sludge settling, temperature, pH, dissolved oxygen and chlorine concentration.
- The kit is designed as a complete and self-contained portable laboratory that provides easy-to-use measurements for wastewater treatment plant operators.
- Includes required reagents / equipment to check temperature, pH, sludge settling, dissolved oxygen and chlorine.
- Uses simple and economical drop titration and color disc methods.
- The kit contains all the reagents and accessories you need in a robust portable case for field analysis.
STPL-WRT Parameters and Ranges
- Dissolved oxygen 0 - 1 mg/l; 0-10 mg/l O2
- Total chlorine 0 - 3.4 mg/l Cl2
- pH 4 - 10 pH units
- Temperature -10 - 110 °C
- Settleable matter ml/l
- Sludge Settability — Plots the percentage of solids settled over time to obtain the sedimentation rate. The procedure for pretreating activated sludge samples is contained in the step-by-step instructions supplied with the kit.
Specifications
| Application area | Test kits, Wastewater, Treatment facilities, Process control |
| Type | Portable-field |
| Industry | Municipal |
| Parameters | Temperature, Dissolved oxygen, pH, Chlorine total |
Recommended products
Surface water test kit
Test kit for monitoring source water and water at treatment facilities. Drop count titration and color disk methods are used to perform analyzes for ammonia, chlorine, pH, nitrate, dissolved oxygen, phosphorus and temperature.
SKU: 2559800
CompareTest kit NPK-1 for assessing soil fertility
NPK-1 test kit designed for easy assessment of soil fertility. Provides an efficient way to measure nitrogen (0 - 40 mg/l), phosphorus (0 - 40 mg/l) and potassium in soil.
SKU: 2495900
Pool Master test kit for pool water analysis
The Hach Pool Master kit combines several tests in one kit: alkalinity, chlorine, hardness and pH, as well as specific tests for total alkalinity, calcium hardness and cyanuric acid.
SKU: 2315001
Test kit CY-3 for the analysis of cyanuric acid in swimming pool water
Cyanuric acid is a chlorine stabilizer and is used in swimming pool water treatment. The kit contains all the reagents and accessories you need in a robust portable case for field analysis.
SKU: 185102
Test kit CN-67, chlorine and pH (pools and spas)
Chlorine and pH control in pools and spas to maintain safe bathing conditions and protect systems from corrosion.
SKU: 1411100
Test kit CA-10WR for water analysis (ecology)
The kit contains all the necessary reagents and equipment in a rugged portable case for analyzing pH, dissolved oxygen and CO2 in the field conditions.
SKU: 143801
Saltwater aquaculture test kit FF-3
The test kit contains the necessary reagents and accessories for the analysis of water in the field of marine aquaculture. Analyze 10 key salt water parameters to maintain profitable fish production.
SKU: 243003
Test kit FF-1A for water analysis in fish farming (9 parameters)
Test set FF-1A with reagents and accessories for determining 9 parameters of water quality in fish ponds: pH, ammonia, dissolved oxygen, nitrites, chlorides, hardness, alkalinity, carbon dioxide content, supersaturation.
SKU: 243002
Test kit for analysis of boiler feed water, model BSC-1
BSC-1 is an economical set for the control of scale formation in small industrial boilers. A drop titration method is used to determine the levels of alkalinity, chloride and hardness in boiler water.
SKU: 2350300
Test kit AL-36B for water analysis in the field of ecology
The test kit contains reagents and necessary accessories for measuring the levels of acidity, alkalinity, carbon dioxide 1.25 - 100 mg/l, dissolved oxygen 0.2 - 20 mg/l, hardness and pH 4 - 10 in water.
SKU: 180202
Test kit FF-2 for water analysis in fish farming (aquaculture)
Maintaining good water quality is essential for profitable fish farming. The Hach test kit model FF-2 measures 10 key parameters of fresh water quality using titration and colorimetry methods.
SKU: 243001
Test kit CN-39WR: chlorine, hardness, iron and pH
The CN-39WR test kit includes the necessary reagents and accessories for the analysis of the concentration of total chlorine, hardness, iron and pH in water.
SKU: 223002
Test kit for analysis of boiler water, model AL-94 MG-L
The kit is used to monitor boiler and cooling water and to check for corrosion. Allows you to control alkalinity, chloride content, hardness, iron content and pH.
SKU: 222403
Test kit BC-3 for analysis of boiler and cooling water
The kit includes everything you need to measure important parameters in boiler and cooling water: alkalinity, chloride concentration, total chlorine, hardness, iron, pH, phosphates, silica and sulphites.
SKU: 2350500
Recommended products
Test kit BC-3 for analysis of boiler and cooling water
The kit includes everything you need to measure important parameters in boiler and cooling water: alkalinity, chloride concentration, total chlorine, hardness, iron, pH, phosphates, silica and sulphites.
SKU: 2350500
Test kit for analysis of boiler water, model AL-94 MG-L
The kit is used to monitor boiler and cooling water and to check for corrosion. Allows you to control alkalinity, chloride content, hardness, iron content and pH.
SKU: 222403
Surface water test kit
Test kit for monitoring source water and water at treatment facilities. Drop count titration and color disk methods are used to perform analyzes for ammonia, chlorine, pH, nitrate, dissolved oxygen, phosphorus and temperature.
SKU: 2559800
Test kit CA-10WR for water analysis (ecology)
The kit contains all the necessary reagents and equipment in a rugged portable case for analyzing pH, dissolved oxygen and CO2 in the field conditions.
SKU: 143801
Test kit CN-67, chlorine and pH (pools and spas)
Chlorine and pH control in pools and spas to maintain safe bathing conditions and protect systems from corrosion.
SKU: 1411100
Saltwater aquaculture test kit FF-3
The test kit contains the necessary reagents and accessories for the analysis of water in the field of marine aquaculture. Analyze 10 key salt water parameters to maintain profitable fish production.
SKU: 243003
Test kit CN-39WR: chlorine, hardness, iron and pH
The CN-39WR test kit includes the necessary reagents and accessories for the analysis of the concentration of total chlorine, hardness, iron and pH in water.
SKU: 223002
Test kit FF-1A for water analysis in fish farming (9 parameters)
Test set FF-1A with reagents and accessories for determining 9 parameters of water quality in fish ponds: pH, ammonia, dissolved oxygen, nitrites, chlorides, hardness, alkalinity, carbon dioxide content, supersaturation.
SKU: 243002
Test kit for analysis of boiler feed water, model BSC-1
BSC-1 is an economical set for the control of scale formation in small industrial boilers. A drop titration method is used to determine the levels of alkalinity, chloride and hardness in boiler water.
SKU: 2350300
