HomeCatalogReagents and standards HACHStandardsSingle-parameter standards

Single-parameter standards

Reset

Application area

Drinking water 47 Environmental monitoring 22 Laboratory analysis 37 Oil and gas 1 Pharmaceuticals 13 Process control 10 Reagents 22 Soil analysis 3 Test kits 1 Treatment facilities 4 Wastewater 59

Type

Liquid reagents 6 Reagents in ampoules 3 Standard solutions - one-parameter analysis 66

Industry

Pulp and paper 47 Power generation 50 Chemical 50 Municipal 63 Transport 47 Food and Beverage 49 Ecology 42 Glass 47 Pharmaceutical 49

Brand name

Hach 63 Mettler Toledo 13

Parameters

AOX (Absorbable halogen organic compounds) 1 Alkalinity 2 Aluminum 1 Ammonia 1 Ammonium 8 BOD 3 Barium 1 Boron 1 COD 3 Calcium 3 Chloride 3 Chlorine 3 Chromium 1 Cobalt 1 Conductivity 5 Copper 2 Fluoride 4 Hardness 1 Hardness of water 1 Iodine 1 Iron 1 Manganese 3 Nickel 1 Nitrate 4 Nitrite 1 ORP (redox potential) 4 Orthophosphates 1 Phosphate 2 Phosphorus total 1 Silicon 1 Silver 1 Sulfate 2 Sulfite 1 Surfactants nonionic 1 Varies 5 Zinc 1

Measurement Range

0 - 10 meq/L 1 0.02 - 5 mg/L NH4-N 1 0.05 - 20.0 mg/L NH4-N 1 1 - 100 mg/L NH4-N 1 10 - 100 meq/L 1 10 - 1000 mg/L NH4-N 1 100 µS/cm 1 200 mV 1 600 mV 1 1000 μS/cm 2 1990 µS/cm 1 10000 µS/cm 1

Method

Hach 8288, Hach 8289 1

Number of tests

20 3

Concentration

0,04 N 1 0,100 N 1 0.020 N 1 0.035 N 1 0.5 mg/L NH4-N 1 1 mg/L F 1 1 mg/L NH4-N 1 1 mg/L PO4 1 1 mg/L SiO2 1 1,00 mg/L NH3-N 1 1g/L TRITON x 100 1 5,25 N 1 6 N 1 8,00 N 1 10 mg/L Ca 1 10 mg/L Cl 1 10 mg/L F 1 10 mg/L Mn 1 10 mg/L NH4-N 2 10,0 mg/L NH3-N 1 15 mg/L PO4 1 25 - 30 mg/L Cl2 2 25 mg/L Mn 1 25 mg/L as P 1 50 - 75 mg/L Cl2 1 50 mg/L Cr3+ 1 50 mg/L NH4-N 2 50 mg/L NO3 1 50 mg/L SO4 1 100 mg/L Ca 1 100 mg/L CaCO3 total 1 100 mg/L Cl 1 100 mg/L F 1 100 mg/L Fe 1 100 mg/L NH3-N 1 100 mg/L NH4 1 100 mg/L NO3 1 100 mg/L as Al 1 100 mg/L as Zn 1 100 мг/л Cu 1 200 mg/L NO3 1 200 mg/L O2 1 250 mg/L NO2-N 1 300 mg/L O2 3 400 mg/L NO3 1 1000 mg/L Ag 1 1000 mg/L B 1 1000 mg/L Ba 1 1000 mg/L Ca 1 1000 mg/L Cl 1 1000 mg/L Cu 1 1000 mg/L F 1 1000 mg/L I⁻ 1 1000 mg/L NH4 1 1000 mg/L O2 1 1000 mg/L SO4 1 1000 mg/L as Co 1 1000 mg/L as Mn 1 1000 mg/L as Ni 1 3000 mg/L О2 1 5000 mg/L as SO3 1 10000 mg/L CaCO3 1 Depending on the batch 1

Concentration 2

0,00435 mol/L ±0,00003 mol/L as NH3-N 1 2.5 mg/L NH4-N 1 11.3 mg/L NO3-N 1 22.6 mg/L NO3-N 1 45.2 mg/L NO3-N 1 50 mg/L as CaCO3 1 90.4 mg/L NO3-N 1 500 mg/L NH4-N 1

Sorting:

51344774 Standard solution 1000 mg/l (copper)

The standard copper solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of copper ions (Cu). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of copper ions in the sample.

SKU: 51344774