998 (90) 174-57-84
Chromium, trivalent, standard solution, 50 mg/L Cr3 + (NIST), 100 ml
SKU: 1415142
Manufacturer: Hach
Availability: Order only
The 1415142 Hach standard solution is used to verify the accuracy of the assay for the determination of the total chromium concentration: test procedure, reagents and instrument, and to determine if the sample contains substances that interfere with the determination of the concentration.
Determine the concentration of the standard solution and compare the expected result with the actual result on the instrument.
Volume: 50 mL
Concentration: 50 mg/L Cr3 +
Specifications Recommended products
Specifications
Specifications
| Application area | Wastewater, Process control |
| Type | Standard solutions - one-parameter analysis |
| Industry | Power generation, Municipal |
| Parameters | Chromium |
| Concentration | 50 mg/L Cr3+ |
| Quantity |
Recommended products
Copper standard solution, 100 mg/L as Cu, 100 mL
Copper standard solution, 100 mg/L as Cu (NIST), 100 mL.
SKU: 12842
Compare
Addista Mono standard for BOD cuvette test LCK555
Addista Mono standard for BOD cuvette test LCK555, concentration 200 mg/L O2.
SKU: LCA555
Sulphate standard solution, 50 mg/L SO4 (NIST)
Sulphate standard solution, concentration 50 mg/L SO4.
SKU: 257849
ORP buffer solution for calibration, 600 mV
Reference solution for calibration of ORP electrodes (sealed plastic bottle).
SKU: 25M2A1002-115
Sulfite Equivalent Standard Solution, 5000 mg/L as SO3
Sodium Thiosulfate Standard Solution (0,125 N). For accuracy checks in Sulfite determinations. Concentration: 5000 mg/L as SO3.
SKU: 2267410
COD standard solution, 300 mg/L O2 (NIST)
COD standard solution, concentration 300 mg/L O2.
SKU: 1218649
Nitratax control standard, 200 mg/L NO3 (45.2 mg/L NO3-N)
Standard solution for calibration / verification of the Nitratax sc process probe.
SKU: LCW827
30090856 Calcium standard solution 10 mg/l Ca
A pre-mixed solution with an accurately known concentration of calcium (Ca) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090856
BOD Standard Solution, 3000 mg/L О2 (NIST)
BOD Standard Solution, concentration 3000 mg/L О2 (NIST).
SKU: 1486610
Standard Solution, Manganese, 25 mg/L Mn (NIST), PourRite Ampoules
Used to check the accuracy of the analysis when determining manganese in a water sample.
SKU: 2112820
Fluoride Standard Solution, 1 mg/L F
Standard Solution. Fluoride, 1.00 mg/L ±0.02 mg/L F- (NIST). 1 L bottle.
SKU: 29153
Chlorine standard solution, 25 - 30 mg/L Cl2 (NIST)
Chlorine standard solution, concentration 25 - 30 mg/L Cl2.
SKU: 2630020
Sodium chloride standard solution, 1000 µS/cm (NIST)
Sodium chloride standard solution, concentration 1000 µS/cm.
SKU: 1440049
Standard solution, cobalt, 1000 mg/L as Co (NIST)
Standard solution, cobalt, 100 mL. Concentration: 1000 mg/L as Co (NIST).
SKU: 2150342
Phosphate standard solution, 1 mg/L PO4
Phosphate Standard Solution, concentration 1 mg/L PO4.
SKU: 256949
Sodium Hydroxide Standard Solution, 6 N
Sodium hydroxide standard solution, 6 N, 1 L bottle.
SKU: 2332453
Nitratax control standard, 50 mg/L NO3 (11.3 mg/L NO3-N)
Standard solution for calibration / verification of the Nitratax sc process probe.
SKU: LCW825
Quality control standard hardness, low range, 500 mL
Quality control standard hardness, low range, 500 mL.
SKU: 2833449
Ammonia Standard Solution, 10 mg/L NH3 -N, 500 mL
Ammonia Standard Solution, 10 mg/L NH3 -N, 500 mL bottle.
SKU: 15349
30090852 Standard solution 10 mg/l (fluoride)
The standard fluoride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of fluoride ions (F). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of fluoride ions in the sample.
SKU: 30090852
Sodium chloride standard solution, 1990 µS/cm (NIST)
Sodium chloride standard solution, concentration 1990 µS/cm.
SKU: 210553
30090860 Ammonium standard solution 100 mg/l
A pre-mixed solution with an accurately known concentration of ammonium (NH4) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090860
Sulphuric acid standard solution, 5,25 N
Sulfuric acid standard solution, 5,25 N, 100 mL bottle.
SKU: 244932
30090859 Ammonium standard solution 1000 mg/l
A pre-mixed solution with an accurately known concentration of ammonium (NH4) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090859
Recommended products
BOD Standard Solution, 3000 mg/L О2 (NIST)
BOD Standard Solution, concentration 3000 mg/L О2 (NIST).
SKU: 1486610
Sodium chloride standard solution, 1990 µS/cm (NIST)
Sodium chloride standard solution, concentration 1990 µS/cm.
SKU: 210553
COD standard solution, 1000 mg/L O2 (NIST)
COD standard solution, concentration 1000 mg/L O2.
SKU: 2253929
Addista Mono standard for chlorine cuvette test LCK310
Addista Mono standard for chlorine cuvette test LCK310, concentration 25 - 30 mg/L Cl2.
SKU: LCA310
Sulfite Equivalent Standard Solution, 5000 mg/L as SO3
Sodium Thiosulfate Standard Solution (0,125 N). For accuracy checks in Sulfite determinations. Concentration: 5000 mg/L as SO3.
SKU: 2267410
Standard solution, zinc, 100 mg/L as Zn (NIST), 100 mL
Standard solution, zinc. For accuracy checks in zinc determinations. Concentration: 100 mg/L as Zn (NIST).
SKU: 237842
Reagent kit Amtax sc with standard, for range 10 - 1000 mg/L NH4-N
LCW866 Reagent Kit for Oline Ammonium Analyzer with Standard Calibration Solutions.
SKU: LCW866
Ammonia Standard Solution, 100 mg/L NH3-N, 500 mL
Ammonia Standard Solution, 100 mg/L NH3-N, 500 mL bottle.
SKU: 2406549
Silver, standard solution, 1000 mg/L as Ag (NIST)
Silver standard solution, 1000 mg/L as Ag (NIST).
SKU: 1461342
