BOD Standard Solution, 300 mg/L О2 (NIST)
SKU: 1486510
Manufacturer: Hach
Availability: Order only
BOD Standard Solution.
Concentration 300 mg/L О2 (NIST).
Formula: Glucose & Glutamic Acid (GGA).
Pack of 16 Ampuls of 10 mL each.
Description Specifications Downloads Recommended products
Description
Description
The use of standard solutions can provide control of the laboratory process, increase confidence, and help provide a clear demonstration of performance to various inspectors, regulatory agencies and clients. One-parameter analysis can be performed on different analyzed samples and concentrations to confirm accuracy.
BOD Standard Solution (1486510) from Hach. For water and wastewater. For accuracy checks in Biochemical Oxygen Demand (BOD) determinations.
Summary of method: Biochemical oxygen demand (BOD) is a measurement of the oxygen requirements of municipal and industrial wastewaters and sewage. The test results are used to calculate the effect of waste discharges on the oxygen resources of the receiving waters. The BOD test gives a limited value in the measurement of the actual oxygen demand because the environmental factors (e.g., temperature change, biological population, water movement, sunlight, oxygen concentration and other factors) cannot be simulated accurately in the laboratory. The BOD test is a very important value after patterns of oxygen uptake for a specified effluent and receiving water are identified. For this test, a sealed wastewater sample (or a prepared dilution) is incubated for the standard 5-day period. Then, the change in dissolved oxygen content is identified. The BOD value is calculated from the results of the dissolved oxygen tests.
Parameter: BOD.
Platform: Solution.
Quantity: 16 pcs 300 mg/L BOD.
Specifications
Application area | Wastewater, Drinking water, Laboratory analysis |
Type | Standard solutions - one-parameter analysis |
Industry | Ecology, Pulp and paper, Pharmaceutical, Glass, Power generation, Transport, Chemical, Food and Beverage, Municipal |
Parameters | BOD |
Concentration | 300 mg/L O2 |
Quantity | 16 ampules 10-mL |
Recommended products
Phosphorus Standard Solution, 25 mg/L as P (NIST)
Phosphorus Standard Solution. For accuracy checks in phosphorus determinations. Concentration: 25 mg/L as P (NIST).
SKU: 2109210
Sodium chloride standard solution, 1000 µS/cm (NIST)
Sodium chloride standard solution, concentration 1000 µS/cm.
SKU: 1440049
Nitratax control standard, 200 mg/L NO3 (45.2 mg/L NO3-N)
Standard solution for calibration / verification of the Nitratax sc process probe.
SKU: LCW827
Standard solution, zinc, 100 mg/L as Zn (NIST), 100 mL
Standard solution, zinc. For accuracy checks in zinc determinations. Concentration: 100 mg/L as Zn (NIST).
SKU: 237842
30090856 Calcium standard solution 10 mg/l Ca
A pre-mixed solution with an accurately known concentration of calcium (Ca) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090856
Nitratax control standard, 100 mg/L NO3 (22.6 mg/L NO3-N)
Standard solution for calibration / verification of the Nitratax sc process probe.
SKU: LCW826
51344774 Standard solution 1000 mg/l (copper)
The standard copper solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of copper ions (Cu). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of copper ions in the sample.
SKU: 51344774
COD standard solution, 1000 mg/L O2 (NIST)
COD standard solution, concentration 1000 mg/L O2.
SKU: 2253929
ORP calibration solution in ampoules (Light's solution)
Light's solution in ampoules for calibration of ORP meters. The package contains 20 ampoules of 20 ml.
SKU: 2612520
30090854 Standard solution 10 mg/l (chloride)
The standard chloride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of chloride ions (Cl⁻). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of chloride ions in the sample.
SKU: 30090854
Boron standard solution, 1000 mg/L as B (NIST)
Boron standard solution, 1000 mg/L as B (NIST).
SKU: 191442
30090853 Standard solution 100 mg/l (chloride)
The standard chloride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of chloride ions (Cl⁻). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of chloride ions in the sample.
SKU: 30090853
Standard Solution, Manganese, 25 mg/L Mn (NIST), PourRite Ampoules
Used to check the accuracy of the analysis when determining manganese in a water sample.
SKU: 2112820
Reagent kit Amtax sc with standard, for range 1 - 100 mg/L NH4-N
LCW871 Reagent Kit for Oline Ammonium Analyzer with Standard Calibration Solutions.
SKU: LCW871
Standard solution, manganese, 100 mL
Standard solution, manganese, 100 mL. Concentration: 1000 mg/L as Mn (NIST). For accuracy checks in manganese determinations (HNO3 matrix).
SKU: 1279142
ORP buffer solution for calibration 200 mV, 500 ml
ORP reference solution used to calibrate the ORP sensor (in resealable plastic bottles).
SKU: 25M2A1001-115
30090860 Ammonium standard solution 100 mg/l
A pre-mixed solution with an accurately known concentration of ammonium (NH4) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090860
Addista Mono standard for BOD cuvette test LCK555
Addista Mono standard for BOD cuvette test LCK555, concentration 200 mg/L O2.
SKU: LCA555
Calcium Hardness Standard Solution, 10000 mg/L CaCO3 (NIST)
Calcium Hardness Standard Solution. For accuracy checks in calcium hardness determinations. Concentration: 10000 mg/L CaCO3 (NIST).
SKU: 218710
Iron standard solution, 100 mg/L Fe (NIST)
Iron standard solution, concentration 100 mg/L Fe.
SKU: 1417542
Chromium, trivalent, standard solution, 50 mg/L Cr3 + (NIST), 100 ml
Solution for checking the accuracy of the analysis when determining the concentration of total chromium.
SKU: 1415142
51344771 Calcium standard solution 1000 mg/l
A pre-mixed solution with an accurately known concentration of calcium (Ca) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 51344771
ORP / Redox calibration solution (ZoBell's solution)
Standard solution for calibration and accuracy verification of ORP electrodes.
SKU: 2316949
Ammonia Standard Solution, 100 mg/L NH3-N, 500 mL
Ammonia Standard Solution, 100 mg/L NH3-N, 500 mL bottle.
SKU: 2406549
Recommended products
Sodium chloride standard solution, 100 µS/cm (NIST)
Sodium chloride standard solution, concentration 100 µS/cm.
SKU: 2971849
Addista Mono standard for chlorine cuvette test LCK310
Addista Mono standard for chlorine cuvette test LCK310, concentration 25 - 30 mg/L Cl2.
SKU: LCA310
30090860 Ammonium standard solution 100 mg/l
A pre-mixed solution with an accurately known concentration of ammonium (NH4) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090860
ORP calibration solution in ampoules (Light's solution)
Light's solution in ampoules for calibration of ORP meters. The package contains 20 ampoules of 20 ml.
SKU: 2612520
Nitratax control standard, 50 mg/L NO3 (11.3 mg/L NO3-N)
Standard solution for calibration / verification of the Nitratax sc process probe.
SKU: LCW825
Phosphax sc LR Standard Solution S
Standard concentration solution for the Phosphax sc LR industrial orthophosphate analyzer.
SKU: LCW958
Chlorine standard solution, 25 - 30 mg/L Cl2 (NIST)
Chlorine standard solution, concentration 25 - 30 mg/L Cl2.
SKU: 2630020
Ammonia Standard Solution, 100 mg/L NH3-N, 500 mL
Ammonia Standard Solution, 100 mg/L NH3-N, 500 mL bottle.
SKU: 2406549
Copper standard solution, 100 mg/L as Cu, 100 mL
Copper standard solution, 100 mg/L as Cu (NIST), 100 mL.
SKU: 12842