998 (90) 174-57-84
COD standard solution, 300 mg/L O2 (NIST)
SKU: 1218629
Manufacturer: Hach
Availability: Order only
COD standard solution.
Сoncentration 300 mg/L O2.
200 mL bottle.
Description Specifications Downloads Recommended products
Description
Description
The use of standard solutions can provide control of the laboratory process, increase confidence, and help provide a clear demonstration of performance to various inspectors, regulatory agencies and clients. One-parameter analysis can be performed on different analyzed samples and concentrations to confirm accuracy.
COD standard solution (1218629) from Hach for one-parameter water analysis. For accuracy checks in Chemical Oxygen Demand (COD) determinations. 200 mL bottle.
Application: For water and wastewater. Digestion is required.
Parameter: COD.
Platform: Solution.
Summary of method: The results in mg/L COD are defined as the milligrams of O2 consumed per liter of sample under the conditions of this procedure. The sample is heated for 2 hours with sulfuric acid and a strong oxidizing agent, potassium dichromate. Oxidizable organic compounds react, reducing the dichromate ion (Cr2O7 2–) to green chromic ion (Cr3+). When the 0.7–40.0 or the 3–150 mg/L colorimetric method is used, the amount of Cr6+ that remains is measured. When the 20–1500 mg/L or 200–15,000 mg/L colorimetric method is used, the amount of Cr3+ that is produced is measured. The COD reagent also contains silver and mercury ions. Silver is a catalyst, and mercury is used to complex chloride interferences
Specifications
| Application area | Wastewater, Drinking water, Laboratory analysis |
| Type | Standard solutions - one-parameter analysis |
| Industry | Ecology, Pulp and paper, Pharmaceutical, Glass, Power generation, Transport, Chemical, Food and Beverage, Municipal |
| Parameters | COD |
| Concentration | 300 mg/L O2 |
| Quantity | 200 mL |
Downloads
 |
Oxygen Demand, Chemical-Reactor Digestion COD Method 8000 ULR, LR, HR, HR plus+ |  |
Recommended products
Boron standard solution, 1000 mg/L as B (NIST)
Boron standard solution, 1000 mg/L as B (NIST).
SKU: 191442
Compare
30090853 Standard solution 100 mg/l (chloride)
The standard chloride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of chloride ions (Cl⁻). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of chloride ions in the sample.
SKU: 30090853
Quality control standard hardness, low range, 500 mL
Quality control standard hardness, low range, 500 mL.
SKU: 2833449
Standard solution, cobalt, 1000 mg/L as Co (NIST)
Standard solution, cobalt, 100 mL. Concentration: 1000 mg/L as Co (NIST).
SKU: 2150342
Sulphate standard solution, 50 mg/L SO4 (NIST)
Sulphate standard solution, concentration 50 mg/L SO4.
SKU: 257849
Nitrite standard solution, 250 mg/L NO2-N, APHA
Nitrite standard solution, concentration 250 mg/L NO2-N.
SKU: 2340249
Phosphax sc LR Standard Solution S
Standard concentration solution for the Phosphax sc LR industrial orthophosphate analyzer.
SKU: LCW958
Chromium, trivalent, standard solution, 50 mg/L Cr3 + (NIST), 100 ml
Solution for checking the accuracy of the analysis when determining the concentration of total chromium.
SKU: 1415142
Phosphorus Standard Solution, 25 mg/L as P (NIST)
Phosphorus Standard Solution. For accuracy checks in phosphorus determinations. Concentration: 25 mg/L as P (NIST).
SKU: 2109210
SKU: 1054322511
Nitratax control standard, 400 mg/L NO3 (90.4 mg/L NO3-N)
Standard solution for calibration / verification of the Nitratax sc process probe.
SKU: LCW863
Chlorine standard solution, 25 - 30 mg/L Cl2 (NIST)
Chlorine standard solution, concentration 25 - 30 mg/L Cl2.
SKU: 2630020
Standard solution, aluminum, 100 mg/L as Al (NIST), 100 mL
Standard solution, aluminum, 100 mg/L as Al (NIST), 100 mL.
SKU: 1417442
Nitratax control standard, 200 mg/L NO3 (45.2 mg/L NO3-N)
Standard solution for calibration / verification of the Nitratax sc process probe.
SKU: LCW827
Sodium chloride standard solution, 1000 µS/cm (NIST)
Sodium chloride standard solution, concentration 1000 µS/cm.
SKU: 1440049
51344776 Standard solution for ISE 1000 mg/l I⁻
The iodide standard solution for ion selective electrodes provides accurate reference points for reliable measurements of iodide ion concentrations in samples.
SKU: 51344776
30090854 Standard solution 10 mg/l (chloride)
The standard chloride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of chloride ions (Cl⁻). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of chloride ions in the sample.
SKU: 30090854
Addista Mono standard for BOD cuvette test LCK555
Addista Mono standard for BOD cuvette test LCK555, concentration 200 mg/L O2.
SKU: LCA555
SKU: 227142
BOD Standard Solution, 300 mg/L О2 (NIST)
BOD Standard Solution, concentration 300 mg/L О2 (NIST).
SKU: 1486510
Ammonia Standard Solution, 1 mg/L NH3 -N, 500 mL
Ammonia Standard Solution, 1 mg/L NH3 -N, 500 mL bottle.
SKU: 189149
Sulphuric acid standard solution, 5,25 N
Sulfuric acid standard solution, 5,25 N, 100 mL bottle.
SKU: 244932
Sulphuric acid standard solution, 0,035 N, 100 mL
Sulphuric acid standard solution, 0,035 N, 100 mL marked drpping bottle (MDB).
SKU: 2349732
COD standard solution, 300 mg/L O2 (NIST)
COD standard solution, concentration 300 mg/L O2.
SKU: 1218649
Recommended products
Sodium Hydroxide Standard Solution, 6 N
Sodium hydroxide standard solution, 6 N, 1 L bottle.
SKU: 2332453
51344776 Standard solution for ISE 1000 mg/l I⁻
The iodide standard solution for ion selective electrodes provides accurate reference points for reliable measurements of iodide ion concentrations in samples.
SKU: 51344776
Sodium chloride standard solution, 1000 µS/cm (NIST)
Sodium chloride standard solution, concentration 1000 µS/cm.
SKU: 1440049
30090853 Standard solution 100 mg/l (chloride)
The standard chloride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of chloride ions (Cl⁻). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of chloride ions in the sample.
SKU: 30090853
Nitratax control standard, 100 mg/L NO3 (22.6 mg/L NO3-N)
Standard solution for calibration / verification of the Nitratax sc process probe.
SKU: LCW826
Nitratax control standard, 400 mg/L NO3 (90.4 mg/L NO3-N)
Standard solution for calibration / verification of the Nitratax sc process probe.
SKU: LCW863
Quality control standard hardness, low range, 500 mL
Quality control standard hardness, low range, 500 mL.
SKU: 2833449
SKU: 1054322511
Sulfuric Acid Standard Solution, 0,04 N
Sulfuric acid standard solution, 0,04 N, 500 ml bottle.
SKU: 2339349
