998 (90) 174-57-84
Online analyzers
Filters
Sorting:
Ammonium analyzers Hach Amtax sc
High-precision industrial device for the determination of ammonium in water, waste water and activated sludge. Amtax sc measures ammonium concentration using a gas selective electrode (GSE). Designed for outdoor or indoor installation.
SKU: LXV421.99.???1
Compare
CL17 sc Photometric Chlorine Analyzer
The Hach CL17 sc analyzer is used for continuous monitoring and determination of the concentration of free or total residual chlorine in water. Readings are not affected by changes in chlorine concentration, sample pH, temperature, flow rate, or pressure. The CL17 sc is also suitable for measuring residual permanganate content. Research demonstrates the analyzer's analytical capabilities and confirms that it is a reliable solution and a good tool for managing complex water purification and disinfection processes.
SKU: 8574500, 8574400
CL17sc Colorimetric Chlorine Analyzer, Ultra Low Range 0.008 - 5.0 mg/L Cl2
The CL17sc analyzer is best suited for pure water, which measures either the presence of chlorine in small quantities or its absence. It measures the total chlorine concentration from 0.008 to 5.0 mg/l. If your processes include reverse osmosis membranes or any form of dechlorination such as chemical (eg sulfite/bisulfite) and/or adsorptive (eg activated carbon), then the ultra-low detection range CL17sc can be used to monitor the presence of chlorine at very low levels or its complete absence, depending on the needs of your process and equipment.
SKU: 9790400, 9790500
Amperometric sensors for total and free chlorine CLT10 sc and CLF10 sc
The amperometric sensors CLT10 sc and CLF10 sc complement real-time chemical analysis solutions for free and total chlorine in the laboratory and industry. Amperometric sensors continuously monitor the chlorine concentration without the use of reagents. Measurement range 0 - 20 ppm Cl2.
SKU: LXV45A.98.23022, LXV45B.98.23022
Industrial titrator - Ammonium Analyzer EZ4005
The EZ4005 ammonium analyzer is a single parameter titrator with a wide measuring range: Standard measuring range: 100 - 5000 mg/L NH4-N.
SKU: EZ4005.99001C02
SKU: TPNA-500
SKU: HU-200TB-IM
SKU: HR-480
SKU: HR-200
EZ1006 / EZ1007 Free and Total Chlorine Analyzers
The EZ Series online analyzers offer several options for monitoring chlorine in water. Typical applications are drinking water, surface water, process water. The EZ1000 Series analyzers use colorimetric method to measure chlorine. EZ1006 Chlorine free. EZ1007 Chlorine, total. Standard measuring range: 0.025 - 1.5 mg / l Cl2.
SKU: EZ1006.99001C02, EZ1007.99001C02
SKU: UV500 ATEX
EZ1002 / EZ1003 Ammonium Colorimetric Analyzer
EZ1002 is a colorimetric measurement of ammonium concentration at 630 nm based on the APHA 3500-NH3 standard method (Berthelot). EZ1003 - colorimetric measurement at 450 nm in accordance with EPA Standard Method 350.1 (Nessler).
SKU: EZ1002.99001C02, EZ1003.99001C02
SKU: UV300-5D
Colorimetric Hardness Analyzer Envirolyzer EZ1000 Series
EZ1000 series analyzers use the colorimetric method of analysis: EZ1016 total hardness, EZ1017 calcium hardness, EZ1304 total hardness and calcium hardness, EZ1306 total hardness, calcium and magnesium hardness. Standard measuring range: 0.025 - 1 mg/L CaCO3.
SKU: EZ1016.99001C02
SKU: UV500-Compact
Titrimetric analyzer of total and calcium hardness EZ4043 / EZ4041 / EZ4044
The EZ4000 Series Hardness Analyzers are single parameter titrators: total hardness EZ4043 - Calmagit / EDTA method with a submersible LED probe, standard measurement range: 0.25 - 10 mg/L CaCO3; EZ4041 total hardness; calmagit / EDTA method, standard measurement range: 100 - 1000 mg/L CaCO3; EZ4044 Calcium hardness, standard measuring range: 10 - 1000 mg/L CaCO3.
SKU: EZ4041.99001C02, EZ4043.99001C02, EZ4044.99001C02
SKU: EL200
EZ4003 Free Alkalinity Analyzer
The EZ4003 Free Alkalinity Analyzers use an acid-base titration. Standard range 100 - 2500 mg/l CaCO3.
SKU: EZ4003.99001C02
SKU: LXV462.99.12321
EZ4004 Process Total Alkalinity Analyzer
Online analyzer to determine the total alkalinity of water in real time.
SKU: EZ4004.99001C02
SKU: TC007
Orthophosphate analyzer PHOSPHAX sc
With detection limits ranging from 0.05 mg/L to 50 mg/L, the Phosphax sc phosphate analyzer can be used anywhere in the wastewater treatment process, from water entering the treatment plant or starting a phosphorus removal process where phosphate levels can be high, to discharged wastewater with a low level of phosphate.
SKU: LXV422.99.13001
Sorting:
Ammonium analyzers Hach Amtax sc
High-precision industrial device for the determination of ammonium in water, waste water and activated sludge. Amtax sc measures ammonium concentration using a gas selective electrode (GSE). Designed for outdoor or indoor installation.
SKU: LXV421.99.???1
CL17 sc Photometric Chlorine Analyzer
The Hach CL17 sc analyzer is used for continuous monitoring and determination of the concentration of free or total residual chlorine in water. Readings are not affected by changes in chlorine concentration, sample pH, temperature, flow rate, or pressure. The CL17 sc is also suitable for measuring residual permanganate content. Research demonstrates the analyzer's analytical capabilities and confirms that it is a reliable solution and a good tool for managing complex water purification and disinfection processes.
SKU: 8574500, 8574400
CL17sc Colorimetric Chlorine Analyzer, Ultra Low Range 0.008 - 5.0 mg/L Cl2
The CL17sc analyzer is best suited for pure water, which measures either the presence of chlorine in small quantities or its absence. It measures the total chlorine concentration from 0.008 to 5.0 mg/l. If your processes include reverse osmosis membranes or any form of dechlorination such as chemical (eg sulfite/bisulfite) and/or adsorptive (eg activated carbon), then the ultra-low detection range CL17sc can be used to monitor the presence of chlorine at very low levels or its complete absence, depending on the needs of your process and equipment.
SKU: 9790400, 9790500
Amperometric sensors for total and free chlorine CLT10 sc and CLF10 sc
The amperometric sensors CLT10 sc and CLF10 sc complement real-time chemical analysis solutions for free and total chlorine in the laboratory and industry. Amperometric sensors continuously monitor the chlorine concentration without the use of reagents. Measurement range 0 - 20 ppm Cl2.
SKU: LXV45A.98.23022, LXV45B.98.23022
Industrial titrator - Ammonium Analyzer EZ4005
The EZ4005 ammonium analyzer is a single parameter titrator with a wide measuring range: Standard measuring range: 100 - 5000 mg/L NH4-N.
SKU: EZ4005.99001C02
SKU: TPNA-500
SKU: HU-200TB-IM
SKU: HR-480
SKU: HR-200
EZ1006 / EZ1007 Free and Total Chlorine Analyzers
The EZ Series online analyzers offer several options for monitoring chlorine in water. Typical applications are drinking water, surface water, process water. The EZ1000 Series analyzers use colorimetric method to measure chlorine. EZ1006 Chlorine free. EZ1007 Chlorine, total. Standard measuring range: 0.025 - 1.5 mg / l Cl2.
SKU: EZ1006.99001C02, EZ1007.99001C02
SKU: UV500 ATEX
EZ1002 / EZ1003 Ammonium Colorimetric Analyzer
EZ1002 is a colorimetric measurement of ammonium concentration at 630 nm based on the APHA 3500-NH3 standard method (Berthelot). EZ1003 - colorimetric measurement at 450 nm in accordance with EPA Standard Method 350.1 (Nessler).
SKU: EZ1002.99001C02, EZ1003.99001C02
SKU: UV300-5D
Colorimetric Hardness Analyzer Envirolyzer EZ1000 Series
EZ1000 series analyzers use the colorimetric method of analysis: EZ1016 total hardness, EZ1017 calcium hardness, EZ1304 total hardness and calcium hardness, EZ1306 total hardness, calcium and magnesium hardness. Standard measuring range: 0.025 - 1 mg/L CaCO3.
SKU: EZ1016.99001C02
SKU: UV500-Compact
Titrimetric analyzer of total and calcium hardness EZ4043 / EZ4041 / EZ4044
The EZ4000 Series Hardness Analyzers are single parameter titrators: total hardness EZ4043 - Calmagit / EDTA method with a submersible LED probe, standard measurement range: 0.25 - 10 mg/L CaCO3; EZ4041 total hardness; calmagit / EDTA method, standard measurement range: 100 - 1000 mg/L CaCO3; EZ4044 Calcium hardness, standard measuring range: 10 - 1000 mg/L CaCO3.
SKU: EZ4041.99001C02, EZ4043.99001C02, EZ4044.99001C02
SKU: EL200
EZ4003 Free Alkalinity Analyzer
The EZ4003 Free Alkalinity Analyzers use an acid-base titration. Standard range 100 - 2500 mg/l CaCO3.
SKU: EZ4003.99001C02
SKU: LXV462.99.12321
EZ4004 Process Total Alkalinity Analyzer
Online analyzer to determine the total alkalinity of water in real time.
SKU: EZ4004.99001C02
SKU: TC007
Orthophosphate analyzer PHOSPHAX sc
With detection limits ranging from 0.05 mg/L to 50 mg/L, the Phosphax sc phosphate analyzer can be used anywhere in the wastewater treatment process, from water entering the treatment plant or starting a phosphorus removal process where phosphate levels can be high, to discharged wastewater with a low level of phosphate.
SKU: LXV422.99.13001