998 (90) 174-57-84
LCK319 Cyanide (easily liberatable) cuvette test 0,03 - 0,35 mg/L CN
SKU: LCK319
Manufacturer: Hach
Availability: Order only
Reagent kit for the determination of easily liberatable cyanide.
Measuring range 0.03 - 0.35 mg / l CN.
The number of tests in a package is 24 pieces (the test includes a zero reagent).
Storage temperature: 2 - 8 ° C (keep refrigerated).
Description Specifications Video Downloads Recommended products
Description
Description
Cuvette test LCK319 for the determination of cyanide from Hach. The reagent kit is easy to use and photometric evaluation, packed in a box with instructions.
Application: for waste water and process analysis.
Parameter: Cyanide, easily liberatable
Description of the method: The reaction converts easily liberated cyanide into gaseous HCN (hydrogen cyanide), which passes through a membrane into the indicator cuvette. The color change of the indicator is photometrically evaluated
Note: The pH of the water sample must be between pH 7–10. If this is not the case, the water sample must be adjusted to the correct pH:
pH < 7 Add sodium hydroxide solution drop by drop until the specified pH range is reached.
pH > 10 Add sulphuric acid drop by drop until the specified pH range is reached.
Make sure that the pH does not fall below 7, as hydrocyanic acid (HCN gas) can then escape!
The temperature of the water sample and reagents must be between 15–25 °C (59–77 °F).
The analysis should be carried out immediately after sampling.
Specifications
| Application area | Test kits, Wastewater, Reagents, Process control |
| Type | Cuvette tests 13 mm |
| Industry | Ecology, Pulp and paper, Power generation, Transport, Chemical, Food and Beverage, Municipal |
| Parameters | Cyanide |
| Measurement Range | 0,03 - 0,35 mg/L CN |
| Compatibility | DR6000, DR1900, DR3900, DR5000, DR2800, DR3800 |
| Method | Hach Method |
| Number of tests | 24 (test includes zero solution) |
Downloads
 |
Working procedure: LCK319 Cyanide easily liberated |  |
Recommended products
LCK327 Water Hardness cuvette test 1-20° dH
Test kit for determining water hardness, measuring range 1-20 ° dH; 5 - 100 mg / l Ca; 3 - 50 mg / l Mg.
SKU: LCK327
Compare
LCW632 Manganese reagent set 0,005 - 0,7 mg/L Mn
LCW632 reagent kit for the determination of manganese, measuring range 0.005 - 0.7 mg / l Mn.
SKU: LCW632
LCK337 Nickel cuvette test, 0,1 - 6,0 mg/L Ni
Reagent kit for nickel, measurement range 0,1 - 6,0 mg / L Ni.
SKU: LCK337
LCK714, COD cuvette test 100 - 600 mg/L O2
COD reagent kit, measuring range 100 - 600 mg/L O2.
SKU: LCK714
LCI400 COD cuvette test, 0 - 1000 мг/л O2
A set of reagents for the determination of COD; measuring range 0 - 1000 mg/L O2
SKU: LCI400
LCK355 Silver cuvette test, 5 - 2500 mg/L Ag
Test kit for the determination of Silver, two measuring ranges 5 - 400 mg/L Ag / 400 - 2500 mg/L Ag.
SKU: LCK355
LCK549 Orthophosphate cuvette test, 0,01 - 0,5 mg/L PO4-P
Cuvette test for the determination of Orthophosphate, measuring range 0,01 - 0,5 mg/L PO4-P.
SKU: LCK549
LCW250 Reducing agent for boiler water reagent set, 0,05 - 1,0 mg/L (DEHA)
LCW250 reagent set for the determination of reducing agents for boiler water. Measuring range 0,05 - 1,0 mg/L (DEHA)
SKU: LCW250
LCK365 Organic Acids cuvette test 50 - 2500 mg/L
LCK365 cuvette test for determination of Organic Acids, measurement range 50 - 2500 mg/L.
SKU: LCK365
LCK1914 COD cuvette test for salt water, 70 - 700 mg/L O2
Reagent kit for the determination of COD in salt water. Measurement range 70 - 700 mg / l O2.
SKU: LCK1914
LCS313 Chromium (III and VI) trace cuvette test, 0,005 - 0,25 mg/L Cr
A set of reagents for the determination of chromium traces (III and VI), measuring range 0,005 - 0,25 mg/L Cr.
SKU: LCS313
LCK340 Nitrate cuvette test, 5 - 35 mg/L NO3-N
Reagent kit for the determination of Nitrate, measuring range 5 - 35 mg/L NO3-N / 22 - 155 mg/L NO3.
SKU: LCK340
LCS349 Phosphate (Ortho/Total) cuvette test, 0,01 - 0,5 mg/L PO4-P
Phosphate reagent kit (Ortho/Total), measuring range 0,01 - 0,5 mg/L PO4-P / 0,03 - 1,5 mg/L PO4.
SKU: LCS349
LCW510 Reagent set Chlorine (Cl2)/Ozone (О3), 0,03 - 0,4/0,05 - 1,5 mg/L
LCW510 Reagent Kit for determination of Free and total Chlorine (Cl2) + Ozone (O3), measuring range 0,03 - 0,4/0,05 - 1,5 mg/L
SKU: LCW510
LCK303 Ammonium cuvette test, 2,0 - 47,0 mg/L NH4-N
Reagent kit LCK303 for the determination of Ammonium, measuring range: 2,0 - 47,0 mg/L NH4-N / 2,5 - 60 mg/L NH4.
SKU: LCK303
LCK323 Fluoride cuvette test, 0,1 - 2,5 mg/L F
LCK323 cuvette test for determination of fluoride, measuring range 0,1 - 2,5 mg/L F.
SKU: LCK323
LCK321 Iron cuvette test 0,2 - 6,0 mg/L Fe
A set of reagents for the determination of iron, measuring range 0.2 - 6.0 mg / l Fe.
SKU: LCK321
LCW532 Manganese reagent set, 0,005 - 0,5 mg/L Mn
A set of reagents for the determination of manganese, measuring range 0,005 - 0,5 mg/L Mn.
SKU: LCW532
LCS360 Zinc trace cuvette test, 0,02 - 0,8 mg/L Zn
Reagent kit for determination of zinc traces, measuring range 0,02 - 0,8 mg / l Zn.
SKU: LCS360
LCK308 Cadmium cuvette test, 0,02 - 0,3 mg/L Cd
Cadmium test kit, measuring range 0,02 - 0,3 mg/L Cd.
SKU: LCK308
LCK339 Nitrate cuvette test, 0,23 - 13,5 mg/L NO3-N
Reagent kit for the determination of Nitrate, measuring range 0,23 - 13,5 mg/L NO3-N.
SKU: LCK339
LCK353 Sulphate cuvette test, 150 - 900 mg/L SO4
LCK353 Sulphate cuvette test, measuring range 150 - 900 mg/L SO4.
SKU: LCK353
LCK391 AOX cuvette test 0.005 - 0.5 mg/L
LCK391 cuvette test for the determination of AOX (Adsorbable organic halogen compounds), measuring range 0.005 - 0.5 mg / l
SKU: LCK391
LCK214 COD cuvette test, 0 - 1000 mg/l O2
Reagent kit for determination of chemical oxygen demand, measuring range 0 - 1000 mg/l O2.
SKU: LCK214
Recommended products
LCK346 Phenols cuvette test 5 - 150 mg/L
Test kit for phenols determination, measuring range 5 - 150 mg/L.
SKU: LCK346
LCK240 Iodine cuvette test (MEBAK), iodine value > 0,2
LCK240 cuvette test for the determination of iodine (direct method), iodine value > 0,2.
SKU: LCK240
LCK427 Residual Hardness cuvette test, 0,02 - 0,6 °dH (Ca+Mg)
LCK427 cuvette test for determination of residual hardness, measuring range 0,02 - 0,6 °dH.
SKU: LCK427
LCK914 COD cuvette test 5 - 60 g/L О2
LCK914 set of reagents for determination of COD, measuring range 5 - 60 g/L O2
SKU: LCK914
LCK153 Sulphate cuvette test, 40 - 150 mg/L SO4
LCK153 Sulphate cuvette test, measuring range 40 - 150 mg/L SO4.
SKU: LCK153
LCK549 Orthophosphate cuvette test, 0,01 - 0,5 mg/L PO4-P
Cuvette test for the determination of Orthophosphate, measuring range 0,01 - 0,5 mg/L PO4-P.
SKU: LCK549
LCK301 Aluminum cuvette test 0,02-0,5 mg/L Al
Reagent kit LCK301 for the determination of aluminum, measuring range 0.02 - 0.5 mg / l Al.
SKU: LCK301
LCK318 Sludge activity (TTC) cuvette test
Test kit for determination of sludge activity, 5-200 µg Formazan (SA); 0 - 500% Residual Activity (RA).
SKU: LCK318
LCW028 Silica Reagent Set, 0,01 - 0,8 mg/L SiO2
LCW028 reagent kit for determination of Silicа, measuring range 0,01 - 0,8 mg/L SiO2.
SKU: LCW028
