998 (90) 174-57-84
LCS360 Zinc trace cuvette test, 0,02 - 0,8 mg/L Zn
SKU: LCS360
Manufacturer: Hach
Availability: Order only
Reagent kit for determination of zinc traces.
Measurement range 0.02 - 0.8 mg / l Zn.
The number of tests in the package is 24 (the test includes a zero solution).
Digestion required: for total zinc.
Description Specifications Video Downloads Recommended products
Description
Description
Reagent kit for determination of zinc traces from Hach. The LCS360 cuvette test is easy to use and photometric evaluation, packed in a box with instructions.
Application: for waste water, drinking water, surface water, raw water and process analysis.
Method description: Zinc ions form a water-soluble orange-red complex with 4-(2-pyridylazo)-resorcin (PAR) at pH 6–11.
For trace analysis the standard solution has be diluted by a factor of 4. After dilution the following nominal values are
obtained:
Standard : 0.5 mg/L Zinc
Range of confidence: 0.48–0.52 mg/L Zinc
Special Notes: Undissolved zinc or zinc contained in complexes can only be determined after digestion with the Crack-Set LCW902.
Specifications
| Application area | Test kits, Wastewater, Reagents, Drinking water, Process control |
| Type | Cuvette tests 13 mm |
| Industry | Ecology, Pulp and paper, Pharmaceutical, Glass, Power generation, Transport, Chemical, Food and Beverage |
| Parameters | Zinc |
| Measurement Range | 0,02 - 0,8 mg/L Zn |
| Compatibility | DR6000, DR3900 |
| Method | PAR |
| Number of tests | 24 (test includes zero solution) |
| Quality control | LCA701 |
Downloads
 |
Working procedure: LCS360, Zinc trace |  |
Recommended products
LCK337 Nickel cuvette test, 0,1 - 6,0 mg/L Ni
Reagent kit for nickel, measurement range 0,1 - 6,0 mg / L Ni.
SKU: LCK337
Compare
LCK302 Ammonium cuvette test, 47 - 130 mg/L NH4-N
Reagent kit LCK302 for the determination of Ammonium, measuring range 47 - 130 mg/L NH4-N.
SKU: LCK302
LCK238 Laton Total Nitrogen cuvette test 5-40 mg/L TN
Test kit for determination of total Nitrogen, measuring range 5-40 mg/L TN.
SKU: LCK238
LCK138 Laton Total Nitrogen bonded cuvette test 1 - 16 mg/L TNb
Test kit for determination of total Nitrogen bonded, measuring range 1 - 16 mg/L TNb.
SKU: LCK138
LCK240 Iodine cuvette test (MEBAK), iodine value > 0,2
LCK240 cuvette test for the determination of iodine (direct method), iodine value > 0,2.
SKU: LCK240
LCK323 Fluoride cuvette test, 0,1 - 2,5 mg/L F
LCK323 cuvette test for determination of fluoride, measuring range 0,1 - 2,5 mg/L F.
SKU: LCK323
LCW632 Manganese reagent set 0,005 - 0,7 mg/L Mn
LCW632 reagent kit for the determination of manganese, measuring range 0.005 - 0.7 mg / l Mn.
SKU: LCW632
LCK241 Bitter units (MEBAK) cuvette test, ≥ 2 BU
LCK241 cuvette test (MEBAK) for the determination of bitter units, measurement range ≥ 2 BU.
SKU: LCK241
LCK329 Copper cuvette test 0,1 - 8,0 mg/L Cu
A set of reagents for the determination of Сopper, measuring range 0,1 - 8,0 mg / L Cu.
SKU: LCK329
LCK049 Orthophosphate cuvette test 1,6 - 30 mg/L PO4-P
A set of reagents for the determination of orthophosphate, measuring range: 1,6 - 30 mg /L PO4-P / 5 - 90 mg/L PO4.
SKU: LCK049
LCS028 Silica acid (high range) reagent set 0,8 - 100 mg/L SiO2
LCS028 reagent kit for silicic acid and silicon, measuring range 0.8 - 100 mg / l SiO2 or 0.4 - 50 mg / l Si
SKU: LCS028
LCK339 Nitrate cuvette test, 0,23 - 13,5 mg/L NO3-N
Reagent kit for the determination of Nitrate, measuring range 0,23 - 13,5 mg/L NO3-N.
SKU: LCK339
LCK313 Chromium (III and VI) cuvette test 0,03 - 1,0 mg/L Cr
A set of reagents for the determination of Chromium (III and VI), measuring range 0,03 - 1,0 mg / L Cr.
SKU: LCK313
LCK319 Cyanide (easily liberatable) cuvette test 0,03 - 0,35 mg/L CN
Cyanide test kit, measuring range 0.03 - 0.35 mg / l CN.
SKU: LCK319
LCW 902 CRACK SET Reagent set for metal digestions
LCW 902 Crack Set for metal digestions, 50 tests per pack.
SKU: LCW902
LCK229 Acidic copper plating baths cuvette test 2-100 g/L Cu
Reagent kit LCK229 for the determination of copper for acidic galvanic baths, measuring range 2 - 100 g / l Cu.
SKU: LCK229
LCK314 COD cuvette test, 15 - 150 mg/L O2
Ragents set for COD determination, measuring range 15 - 150 mg/L O2
SKU: LCK314
LCK1414, COD cuvette test for samples with high Chloride loads 100 - 2000 mg/L O2
COD reagent kit for samples with high chloride content, measuring range 100 - 2000 mg / l O2.
SKU: LCK1014
LCW058 hydrogen peroxide pipette test, 1 - 10 g/L H2O2
LCW058 hydrogen peroxide test. Measurement range 1 - 10 g/L H2O2
SKU: LCW058
LCK349 Phosphate (Ortho/Total) cuvette test 0,05 - 1,5 mg/L PO4-P
Phosphate reagent kit (Ortho/Total), measuring range 0,05 - 1,5 mg/L PO4-P / 0,15 - 4,5 mg/L PO4.
SKU: LCK349
LYW185 Menthol in distillate cuvette test 0,5 - 15 mg Menthol/100 mL
Test kit for determination of menthol in distillate, range 0,5 - 15 mg menthol / 100 ml.
SKU: LYW185
LCK114 COD cuvette test, 150 - 1000 mg/L O
A set of reagents for the determination of COD; measuring range 150 - 1000 mg / L O2.
SKU: LCK114
LCW054 Sulphite test kit, 0,1 - 5,0 mg/L SO3
LCW054 test kit for the determination of Sulphites, measuring range 0,1 - 5,0 mg/L SO3.
SKU: LCW054
LCK1914 COD cuvette test for salt water, 70 - 700 mg/L O2
Reagent kit for the determination of COD in salt water. Measurement range 70 - 700 mg / l O2.
SKU: LCK1914
Recommended products
LCW021 Iron trace, reagent set, 0,005 - 2,0 mg/L Fe
Reagent kit for determination of iron traces, measuring range 0,005 - 0,25 mg/L Fe / 0,05 - 2,0 mg/L Fe.
SKU: LCW021
LCI400 COD cuvette test, 0 - 1000 мг/л O2
A set of reagents for the determination of COD; measuring range 0 - 1000 mg/L O2
SKU: LCI400
LCK653 Sulphide cuvette test, 0,1 - 2,0 mg/L S2-
Test kit for the determination of Sulphide, measuring range 0,1 - 2,0 mg/L S2-.
SKU: LCK653
LCK365 Organic Acids cuvette test 50 - 2500 mg/L
LCK365 cuvette test for determination of Organic Acids, measurement range 50 - 2500 mg/L.
SKU: LCK365
LCK357 Starch cuvette test, 2 - 150 mg/L
LCK357 cuvette test for the determination of Starch, measuring range 2 - 150 mg/L
SKU: LCK357
LCK914 COD cuvette test 5 - 60 g/L О2
LCK914 set of reagents for determination of COD, measuring range 5 - 60 g/L O2
SKU: LCK914
LCK302 Ammonium cuvette test, 47 - 130 mg/L NH4-N
Reagent kit LCK302 for the determination of Ammonium, measuring range 47 - 130 mg/L NH4-N.
SKU: LCK302
LCK425 Formaldehyde cuvette test, 0,5 - 10 mg/L H2CO
A set of reagents for the determination of Formaldehyde; measurement range 0,5 - 10 mg/L H2CO
SKU: LCK425
LCK238 Laton Total Nitrogen cuvette test 5-40 mg/L TN
Test kit for determination of total Nitrogen, measuring range 5-40 mg/L TN.
SKU: LCK238
