A critical element of disinfection is accurate dosing and monitoring of the ClO2 level in the water. Adding chlorine dioxide in the right concentration saves material, protects the environment and the health of the end user of your product. Continuously monitor the chlorine dioxide level in the water with the Hach Lange 9187 sc analyzer.
Products
DR3900 Spectrophotometer without RFID Technology
Split Beam Laboratory VIS Spectrophotometer (320-1100 nm) with over 220 pre-programmed methods optimized for laboratory water analysis.
SKU: LPV440.98.00001
LCK014, COD cuvette test 1000 - 10000 mg/L O2
COD reagent kit, measuring range 1000 - 10000 mg/L O2.
SKU: LCK014
LCK1414, COD cuvette test 5 - 60 mg/L O2
COD reagent kit, measuring range 5 - 60 mg/L O2.
SKU: LCK1414
TL2300 Tungsten Lamp Turbidimeter, EPA, 0 - 4000 NTU
The new TL23 Series laboratory turbidity meters combine proven technology and advanced features to simplify industrial and wastewater analysis. Model - TL2300 EPA. Light source: tungsten lamp. Measurement method: nephelometric. Measuring range: 0 - 4000 NTU.
SKU: LPV444.99.00210
DR6000 UV VIS Spectrophotometer without RFID
The DR6000 is the most advanced laboratory spectrophotometer in the industry. It offers high-speed UV and Visible wavelength scanning and comes with over 250 pre-programmed methods that include the most common testing methods used in water analysis.
SKU: LPV441.99.00001
103635 WTW pH electrode SenTix 41 with temperature sensor
Standard electrode with gel electrolyte and built-in temperature sensor for measuring pH in the laboratory and in the field.
SKU: 103635
51343031 pH electrode InLab Versatile Pro
Combined pH electrode in plastic housing with built-in temperature sensor and fixed cable. It is intended for performance of the general laboratory tasks.
SKU: 51343031
LT200 / DRB200 Dry thermostat with 1 block, 9x13 mm / 2x20 mm
LT200 is a digital thermoreactor with one block and openings for 9 x 13 mm / 2 x 20 mm cuvettes. The thermostat meets the requirements for fast and high-quality decomposition in municipal, industrial and service laboratories.
SKU: LTV082.99.10002
2100Q IS Portable Turbidimeter
Hach 2100Q IS Portable Turbidity Meter offers unmatched ease of use and turbidity measurement accuracy. Only Hach offers this unique combination of advanced features and measurement innovation to deliver accurate results.
SKU: 2100QIS01
HI7004L Calibration Buffer pH 4.01
A pH buffer with this value is widely used in water treatment plants, the food industry and anywhere a slightly acidic pH is expected.
SKU: HI7004L
51343101 InLab Expert Pro combination pH electrode
Combination pH electrode with integrated temperature sensor, PEEK shaft and fixed cable. Designed for general use in laboratory and field conditions; durable and maintenance free.
SKU: 51343101
LCK311 Chloride cuvette test 1-70 mg/L / 70-1000 mg/L Cl
LCK311 Chloride cuvette test, measuring range 1 - 70 mg/L / 70 - 1000 mg/L Cl.
SKU: LCK311
HI7006L Calibration solution pH 6.86, volume 500 ml
pH buffer for calibration of pH meters and electrodes, volume 500 ml.
SKU: HI7006L
LCK320 Iron (II / III) cuvette test 0.2-6.0 mg/L Fe
A set of reagents for the determination of iron (II / III), measuring range 0.2 - 6.0 mg / l Fe.
SKU: LCK320
HI7033L Conductivity standard 84 µS/cm (500 ml bottle)
HI7033L is a superior conductivity standard with a conductivity value of 84 µS/cm, prepared from a potassium chloride solution, traceable to NIST.
SKU: HI7033L
LCK241 Bitter units (MEBAK) cuvette test, ≥ 2 BU
LCK241 cuvette test (MEBAK) for the determination of bitter units, measurement range ≥ 2 BU.
SKU: LCK241
LCK321 Iron cuvette test 0,2 - 6,0 mg/L Fe
A set of reagents for the determination of iron, measuring range 0.2 - 6.0 mg / l Fe.
SKU: LCK321
51350018 Technical buffer pH 4.01, 6 x 250 ml
pH buffer with a value of 4.01 for calibrating ph electrodes and ph meters.
SKU: 51350018
LCK394 cuvette test Permanganate Index, 0,5 - 10 mg/L O2, (CODMn)
A set of reagents for the determination of permanganate oxidizability; measuring range 0,5 - 10 mg/L O2.
SKU: LCK394
Singlet Single-Use pH Buffer Kit, pH 4,01 & 7,00
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is ±0.02 at 25°C. Pack of 20 of pH 4,01 & 7,00, 20 mL each.
SKU: 2769920
51350022 Technical buffer pH 9.21, 6 x 250 ml
pH buffer for calibrating electrodes and pH meters.
SKU: 51350022
Stablcal Turbidity Standards Calibration Kit, 0 - 4000 NTU
Five ready to use, stabilised Formazin Primary standard solutions. Kit includes sealed vials of each: <0,1 NTU, 20 NTU, 200 NTU, 1000 NTU, 4000 NTU.
SKU: 2662105
51350024 Technical buffer pH 10.00, 6 x 250 ml
Buffer solution with a pH value of 10.00 for calibrating pH meters and electrodes.
SKU: 51350024
Buffer Solution Kit, Colour-coded, pH 4,01, pH 7,00 and pH 10,01
Buffer Solution Kit, Colour-coded, pH 4,01, pH 7,00 and pH 10,01 ±0.02 pH at 25°C.
SKU: 2947600