HomeCatalogMeters and probes pH Oxygen ConductivityProbes and sensorspH / ORP electrodes103635 WTW pH electrode SenTix 41 with temperature sensor

103635 WTW pH electrode SenTix 41 with temperature sensor

Name: 103635 WTW pH electrode SenTix 41 with temperature sensor
Brand: WTW
SKU: 103635
Availability: InStock

 

SKU: 103635

Manufacturer: WTW

Availability: In stock

Order Add to comparison

SenTix 41 from WTW is a standard gel electrolyte electrode with built-in temperature sensor for measuring pH in the laboratory and in the field.

Cable length - 1 meter (fixed).

Filling Solution, Reference, 3 M KCl with AgCl, 28 mL

SKU: 2841700

LYW185 Menthol in distillate cuvette test 0,5 - 15 mg Menthol/100 mL

SKU: LYW185

Orbisphere 510 controller for oxygen sensors

SKU: 510MMM/W1C0000

Description Specifications Recommended products Accessories

Description

pH electrodes with gel electrolyte and built-in temperature sensor are ideal for field analysis as well as routine laboratory measurements. SenTix 41 electrodes are suitable for applications where reliable measured values are required even under the most adverse conditions.

The electrodes require no maintenance other than occasional cleaning and are therefore particularly economical.

Cleaning SenTix 41:

Remove water soluble contaminants by rinsing with deionized water. Other types of contaminations should be removed as follows, keeping the contact time with detergents as short as possible. To remove grease or oil, the electrode must be washed with water containing household detergent. To clean the electrode from lime and hydroxide deposits, rinse it with citric acid (10% by weight).
Rinse the electrode with deionized water and soak it in the electrolyte solution for at least 1 hour. Then follow the calibration procedure.

Note: Hydrofluoric acid, hot phosphoric acid and strong alkaline solutions will destroy the glass membrane.

Storage of SenTix 41:

During short breaks in measurements: Immerse the electrode in electrolyte (KCl 3 mol/l, without Ag+). Before the next measurement, quickly rinse the electrode with the test sample or deionized water.
Overnight or longer: place a clean electrode in a storage cap filled with electrolyte (KCl 3 mol/L, with no Ag+).

Specifications of the WTW pH electrode 103635

pH measuring range 0...14
Operating temperature range 0 … 80 °C
Length 120 mm ±1
Diameter 12 mm ±0.3
Connection fixed cable (1 meter)

Specifications

Application area	Wastewater, Food production, Drinking water, Brewing, Treatment facilities, Laboratory analysis
Industry	Pharmaceutical, Chemical, Food and Beverage, Municipal
Parameters	pH
Measurement Range	0 - 14 pH
Operating temperature range	0 - 80 °C

Recommended products

Intellical PHC725 refillable pH electrode for low conductivity media RedRod, 1 m cable

High-performance Red Rod technology is now available for the HQD digital platform. Intellical PHC725 is a digital combination pH electrode with built-in temperature sensor.

SKU: PHC72501, PHC72501AP