Aquaanalytics

Laboratory and industrial analysis of COD of effluents of any industry

Hach has developed a range of complete solutions adapted for laboratories and factories performing COD tests. Coordinated instrumentation and reagent systems enable you to run your analysis safer, faster, and with confidence in your results.

 

Products

DR3900 Spectrophotometer without RFID Technology

Split Beam Laboratory VIS Spectrophotometer (320-1100 nm) with over 220 pre-programmed methods optimized for laboratory water analysis.

SKU: LPV440.98.00001

View product Compare

LCK014, COD cuvette test 1000 - 10000 mg/L O2

COD reagent kit, measuring range 1000 - 10000 mg/L O2.

SKU: LCK014

View product Compare

LCK1414, COD cuvette test 5 - 60 mg/L O2

COD reagent kit, measuring range 5 - 60 mg/L O2.

SKU: LCK1414

View product Compare

TL2300 Tungsten Lamp Turbidimeter, EPA, 0 - 4000 NTU

The new TL23 Series laboratory turbidity meters combine proven technology and advanced features to simplify industrial and wastewater analysis. Model - TL2300 EPA. Light source: tungsten lamp. Measurement method: nephelometric. Measuring range: 0 - 4000 NTU.

SKU: LPV444.99.00210

View product Compare

DR6000 UV VIS Spectrophotometer without RFID

The DR6000 is the most advanced laboratory spectrophotometer in the industry. It offers high-speed UV and Visible wavelength scanning and comes with over 250 pre-programmed methods that include the most common testing methods used in water analysis.

SKU: LPV441.99.00001

View product Compare

51343031 pH electrode InLab Versatile Pro

Combined pH electrode in plastic housing with built-in temperature sensor and fixed cable. It is intended for performance of the general laboratory tasks.

SKU: 51343031

View product Compare

HI7004L Calibration Buffer pH 4.01

A pH buffer with this value is widely used in water treatment plants, the food industry and anywhere a slightly acidic pH is expected.

SKU: HI7004L

View product Compare

51343101 InLab Expert Pro combination pH electrode

Combination pH electrode with integrated temperature sensor, PEEK shaft and fixed cable. Designed for general use in laboratory and field conditions; durable and maintenance free.

SKU: 51343101

View product Compare

Free Chlorine Reagent Set for chlorine analyser CL17/CL17sc

Hach reagents for the determination of Free Chlorine by DPD in the analysis of drinking, waste and process water, as well as for the control and monitoring of product quality. The volume of reagents is sufficient for 450 tests. Range 0.03 - 5.00 mg / L Cl2 for CL17 and 0.03 - 10.00 mg / L Cl2 for CL17sc.

SKU: 25569-00

View product Compare

DR3900 Spectrophotometer with RFID technology

High-tech VIS spectrophotometer with RFID technology for reliable and traceable measurements in routine laboratory analyzes.

SKU: LPV440.99.00001

View product Compare

HI7006L Calibration solution pH 6.86, volume 500 ml

pH buffer for calibration of pH meters and electrodes, volume 500 ml.

SKU: HI7006L

View product Compare

HI7033L Conductivity standard 84 µS/cm (500 ml bottle)

HI7033L is a superior conductivity standard with a conductivity value of 84 µS/cm, prepared from a potassium chloride solution, traceable to NIST.

SKU: HI7033L

View product Compare

Buffer Solution Kit, Colour-coded, pH 4,01, pH 7,00 and pH 10,01

Buffer Solution Kit, Colour-coded, pH 4,01, pH 7,00 and pH 10,01 ±0.02 pH at 25°C.

SKU: 2947600

View product Compare

51350018 Technical buffer pH 4.01, 6 x 250 ml

pH buffer with a value of 4.01 for calibrating ph electrodes and ph meters.

SKU: 51350018

View product Compare

SKU: PD20047S5

View product Compare

Singlet Single-Use pH Buffer Kit, pH 4,01 & 7,00

pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is ±0.02 at 25°C. Pack of 20 of pH 4,01 & 7,00, 20 mL each.

SKU: 2769920

View product Compare

51350022 Technical buffer pH 9.21, 6 x 250 ml

pH buffer for calibrating electrodes and pH meters.

SKU: 51350022

View product Compare

SKU: HI5002

View product Compare

103635 WTW pH electrode SenTix 41 with temperature sensor

Standard electrode with gel electrolyte and built-in temperature sensor for measuring pH in the laboratory and in the field.

SKU: 103635

View product Compare

51350010 Buffer pH 10.00, 250 ml

Technical buffer solution for calibration of ph meters and electrodes.

SKU: 51350010

View product Compare

2100Q IS Portable Turbidimeter

Hach 2100Q IS Portable Turbidity Meter offers unmatched ease of use and turbidity measurement accuracy. Only Hach offers this unique combination of advanced features and measurement innovation to deliver accurate results.

SKU: 2100QIS01

View product Compare