+998 (90) 174-57-84
Tannin & Lignin Reagent Set, 0.1-9.0 mg/L
SKU: 2244600
Manufacturer: Hach
Availability: Order only
For the determination of tannin and lignin using the Hach 8193 - Tyrosine method.
Range: 0.1 - 9.0 mg / L as tannic acid
The kit includes: Sodium carbonate solution and TanniVer ™ 3 Tannin Lignin-Reagent for up to 100 tests.
Description Specifications Downloads Recommended products
Description
Description
Reagent kit 2244600.
Parameter: tannin and lignin
Range: 0.1 - 9.0 mg/L as tannic acid
Application: For water, waste water and boiler water.
Method Description [Hach 8193]: This test measures all hydroxylated aromatic compounds including tannin, lignin, phenol and cresol. This method gives a blue color proportional to the amount of these compounds in the sample. Results are presented as total tannin and lignin and are expressed as mg/l tannic acid. The measurement wavelength is 700 nm for spectrophotometers or 610 nm for colorimeters.
Specifications
| Application area | Wastewater, Reagents, Treatment facilities, Process control |
| Type | Liquid reagents |
| Industry | Pulp and paper, Pharmaceutical, Power generation, Transport, Chemical, Food and Beverage, Municipal |
| Parameters | Tannin and Lignin |
| Measurement Range | 0.1-9.0 mg/L C76H52O46 |
| Compatibility | DR6000, DR1900, DR900, DR3900, DR5000, DR2800, DR3800 |
| Method | Tyrosine |
| Number of tests | 100 |
Downloads
 |
Tannin and Lignin, Tyrosine Method 8193 |  |
Recommended products
Formaldehyde Reagent Set, 3-500 µg/L CH2O
Hach reagents for the determination of Formaldehyde in water. Range: 3-500 μg / L CH2O. Number of tests - 100.
SKU: 2257700
Compare
Calibration Verification set for chlorine analyzers CL17sc
The kit includes the necessary reagents and accessories to complete the Cl17sc Series Chlorine Analyzer Calibration Check procedure.
SKU: 8568200
SPADNS Fluoride Reagent Solution, 0.02 - 2.00 мг/л F 500 mL
Hach reagents for the determination of Fluoride. Range: 0.02 to 2.00 mg / L. Volume 500 ml.
SKU: 44449
Manganese Reagent Set, PAN, 0.006-0.700mg/L Mn
Hach reagents for the determination of low manganese concentrations. Range: 0.006 - 0.700 mg / L Mn.
SKU: 2651700
Silica Reagent Set, Bulk Solution, 3 - 1000 µg/L SiO2
Hach reagent kit for the determination of silicon dioxide in the ultra-low range 3 - 1000 μg / l SiO2. The kit is enough for 100 analyzes.
SKU: 2553500
Cobalt / Nickel Reagent Set, PAN Method
For determination of Cobalt and Nickel by the PAN method. Hach Method 8078 (Co) and 8150 (Ni). Range: 0.01 - 2.00 mg/L Co, 0.006 - 1.000 mg/L Ni. Sample Size: 10 mL. Reagent set includes EDTA Reagent Powder Pillows, Phthalate-Phosphate Reagent Powder Pillows, and PAN Indicator Solution (0.3%) for approximately 100 tests.
SKU: 2651600
ORP / Redox calibration solution (ZoBell's solution)
Standard solution for calibration and accuracy verification of ORP electrodes.
SKU: 2316949
Sulfide Reagent Set, 5 - 800 µg/L S2-
Hach reagent kit for the determination of Sulfide 5 - 800 μg / l S2-. The kit is enough for 100 analyzes.
SKU: 2244500
Reagent for BioTector 6 N sulfuric acid with Mn catalyst
Container with reagent for process TOC analyzer.
SKU: 2563890, 2038162
Hardness reagent kit, 4 - 1000 μg/L CaCO3
Determination of ultra-low level of water hardness by the chlorophosphonazo method.
SKU: 2603101
Solution for determination of free ammonia
It is used to determine the concentration of free ammonia by the Indophenol method.
SKU: 2877436
Reagent for BioTector 1,2 N sodium hydroxide
Alkaline reagent for industrial TOC analyzer.
SKU: 2563887, 2985562
Total Chlorine Reagent Set for chlorine analyser CL17/CL17sc
Hach reagents for the determination of Total Chlorine by DPD in the analysis of drinking, waste and process water, as well as for the control and monitoring of product quality. The volume of reagents is sufficient for 450 tests. Range 0.03 - 5.00 mg / L Cl2 for CL17 and 0.03 - 10.00 mg / L Cl2 for CL17sc.
SKU: 2557000
Solution for the determination of molybdenum, 50 mL
Determination of molybdenum in the low range by Hach 8169 method.
SKU: 2352512
Reagent set for chlorine analyzer CL17sc, ultra low range
The reagent kit includes a total chlorine indicator solution, a total chlorine buffer solution, and a DPD compound.
SKU: 9791100
Chlorine Dioxide Reagent Set, 0.01-1.00 mg/L ClO2
Hach reagents for the determination of chlorine dioxide. The volume of reagents is enough for 100 tests.
SKU: 2242300
Standard solution, sodium hydroxide, 0.035 N, 100 ml
Solution for determining the acidity of a water sample.
SKU: 2349332
LeadTrak™ Reagent Set, Fast Column Extraction Method
Hach reagents for the determination of lead. Range: 5 - 150 μg/L Pb.
SKU: 2375000
Chlorine, liquid DPD reagent set, 0.02-2.00mg/L Cl2
Hach reagents for the determination of Chlorine in the analysis of drinking, waste and process water, as well as for control and monitoring of product quality. The reagent volume is sufficient for approximately 100 tests. Range 0.02 - 2.00 mg/L Cl2
SKU: HPT310
Reagent for BioTector 4.0 N NaOH (sodium hydroxide)
Container (10, 20 liters) with a reagent for an industrial TOC analyzer.
SKU: 2563891, 2038062
Reagent A for Phosphax sc LR Analyzer
Reagent for Hach Lange Low Range Orthophosphate Analyzer.
SKU: LCW956
181732 Sulfide 2 Reagent, 100 ml
For the determination of sulfide 5-800 µg/l S2-. Convenient dropper bottle.
SKU: 181732
Ferric ion solution
Solution for the colorimetric determination of chlorides in water by the mercury thiocyanate method.
SKU: 2212242
Phosphax sc LR reagent kit
Reagent kit for industrial analyzer of orthophosphate concentration in wastewater (contains LCW956 + LCW957).
SKU: LCW955
Recommended products
Reagent kit Amtax sc with standard, for range 0.02 - 5 mg/L NH4-N
A set of reagents with standard solutions for calibration.
SKU: LCW889
Sulfite reagent set 0.1-5.0 mg/L SO3
Hach reagent kit for the determination of Sulfite in the range of 0.1-5.0 mg/l SO3. The kit is enough for 100 analyzes.
SKU: HPT430
Chlorine, liquid DPD reagent set, 0.02-2.00mg/L Cl2
Hach reagents for the determination of Chlorine in the analysis of drinking, waste and process water, as well as for control and monitoring of product quality. The reagent volume is sufficient for approximately 100 tests. Range 0.02 - 2.00 mg/L Cl2
SKU: HPT310
Chlorine Dioxide Reagent Set, 0.01-1.00 mg/L ClO2
Hach reagents for the determination of chlorine dioxide. The volume of reagents is enough for 100 tests.
SKU: 2242300
Total Trihalomethanes Plus Reagent Set (THM)
Hach reagent kit for the determination of trihalomethanes (THM) in the range of 10 - 600 μg/L CHCl3. The kit is enough to carry out 50 - 99 analyzes.
SKU: 2790800
Buffer solution Hardness 1, 500 ml.
For hardness determination at pH 10.1 ± 0.1 and 20 °C.
SKU: 42449
Mercury Reagent Set, 0.1-2.5µg/L Hg
Hach reagents for the determination of mercury. Range: 0.1 - 2.5 μg/L Hg. The test kit is enough for 25 tests.
SKU: 2658300
Reagent kit Amtax sc with standard, for range 0.05-20.0 mg/L NH4-N
LCW865 Reagent Kit for Oline Ammonium Analyzer with Standard Calibration Solutions.
SKU: LCW865
Calibration Verification set for chlorine analyzers CL17sc
The kit includes the necessary reagents and accessories to complete the Cl17sc Series Chlorine Analyzer Calibration Check procedure.
SKU: 8568200
