998 (90) 174-57-84
The total organic carbon (TOC) and COD content of airport wastewater can change dramatically in minutes due to weather conditions or the de-icing treatment of aircraft surfaces (ethylene glycol). When you choose Hach, you choose quality and functionality that delivers 24/7 reliability and control. The robust and reliable BioTector B7000i analyzer is your solution for monitoring wastewater containing ADF, ethylene glycol, as well as storm and sanitary effluent.
Transport
Products
DR3900 Spectrophotometer without RFID Technology
Split Beam Laboratory VIS Spectrophotometer (320-1100 nm) with over 220 pre-programmed methods optimized for laboratory water analysis.
SKU: LPV440.98.00001
Compare
LCK014, COD cuvette test 1000 - 10000 mg/L O2
COD reagent kit, measuring range 1000 - 10000 mg/L O2.
SKU: LCK014
LCK1414, COD cuvette test 5 - 60 mg/L O2
COD reagent kit, measuring range 5 - 60 mg/L O2.
SKU: LCK1414
TL2300 Tungsten Lamp Turbidimeter, EPA, 0 - 4000 NTU
The new TL23 Series laboratory turbidity meters combine proven technology and advanced features to simplify industrial and wastewater analysis. Model - TL2300 EPA. Light source: tungsten lamp. Measurement method: nephelometric. Measuring range: 0 - 4000 NTU.
SKU: LPV444.99.00210
DR6000 UV VIS Spectrophotometer without RFID
The DR6000 is the most advanced laboratory spectrophotometer in the industry. It offers high-speed UV and Visible wavelength scanning and comes with over 250 pre-programmed methods that include the most common testing methods used in water analysis.
SKU: LPV441.99.00001
LCK311 Chloride cuvette test 1-70 mg/L / 70-1000 mg/L Cl
LCK311 Chloride cuvette test, measuring range 1 - 70 mg/L / 70 - 1000 mg/L Cl.
SKU: LCK311
Free Chlorine Reagent Set for chlorine analyser CL17/CL17sc
Hach reagents for the determination of Free Chlorine by DPD in the analysis of drinking, waste and process water, as well as for the control and monitoring of product quality. The volume of reagents is sufficient for 450 tests. Range 0.03 - 5.00 mg / L Cl2 for CL17 and 0.03 - 10.00 mg / L Cl2 for CL17sc.
SKU: 25569-00
DR3900 Spectrophotometer with RFID technology
High-tech VIS spectrophotometer with RFID technology for reliable and traceable measurements in routine laboratory analyzes.
SKU: LPV440.99.00001
LCW053 Sulphide reagent set 0.1 - 2.0 mg/L S2-
LCW053 sulphide reagent kit, measuring range 0.01 - 2.0 mg / l S2-.
SKU: LCW053
LCK214 COD cuvette test, 0 - 1000 mg/l O2
Reagent kit for determination of chemical oxygen demand, measuring range 0 - 1000 mg/l O2.
SKU: LCK214
LCK241 Bitter units (MEBAK) cuvette test, ≥ 2 BU
LCK241 cuvette test (MEBAK) for the determination of bitter units, measurement range ≥ 2 BU.
SKU: LCK241
LT200 / DRB200 Dry thermostat with 1 block, 9x13 mm / 2x20 mm
LT200 is a digital thermoreactor with one block and openings for 9 x 13 mm / 2 x 20 mm cuvettes. The thermostat meets the requirements for fast and high-quality decomposition in municipal, industrial and service laboratories.
SKU: LTV082.99.10002
Stablcal Turbidity Standards Calibration Kit, 0 - 4000 NTU
Five ready to use, stabilised Formazin Primary standard solutions. Kit includes sealed vials of each: <0,1 NTU, 20 NTU, 200 NTU, 1000 NTU, 4000 NTU.
SKU: 2662105
LCK320 Iron (II / III) cuvette test 0.2-6.0 mg/L Fe
A set of reagents for the determination of iron (II / III), measuring range 0.2 - 6.0 mg / l Fe.
SKU: LCK320
2100Q IS Portable Turbidimeter
Hach 2100Q IS Portable Turbidity Meter offers unmatched ease of use and turbidity measurement accuracy. Only Hach offers this unique combination of advanced features and measurement innovation to deliver accurate results.
SKU: 2100QIS01
TL2310 LED Turbidimeter, ISO, 0 - 1000 NTU
The new TL23 Series laboratory turbidity meters combine proven technology and advanced features to simplify industrial and wastewater analysis. Model TL2310 ISO. Light source: light-emitting diode (LED). Measurement method: nephelometric. Measurement range: 0 - 1000 NTU.
SKU: LPV444.99.00120
LCK321 Iron cuvette test 0,2 - 6,0 mg/L Fe
A set of reagents for the determination of iron, measuring range 0.2 - 6.0 mg / l Fe.
SKU: LCK321
Total Chlorine Reagent Set for chlorine analyser CL17/CL17sc
Hach reagents for the determination of Total Chlorine by DPD in the analysis of drinking, waste and process water, as well as for the control and monitoring of product quality. The volume of reagents is sufficient for 450 tests. Range 0.03 - 5.00 mg / L Cl2 for CL17 and 0.03 - 10.00 mg / L Cl2 for CL17sc.
SKU: 2557000
Buffer Solution Kit, Colour-coded, pH 4,01, pH 7,00 and pH 10,01
Buffer Solution Kit, Colour-coded, pH 4,01, pH 7,00 and pH 10,01 ±0.02 pH at 25°C.
SKU: 2947600
Singlet Single-Use pH Buffer Kit, pH 4,01 & 7,00
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is ±0.02 at 25°C. Pack of 20 of pH 4,01 & 7,00, 20 mL each.
SKU: 2769920
HQ430D Digital Laboratory Single Channel Multimeter
HQ430D laboratory multi-parameter meter with one input - pH, conductivity, dissolved oxygen, ORP and ISE. Without sensors (electrodes).
SKU: HQ430D.98.00002
HQ430D Laboratory Single Input, Multi-Parameter Meter Electrode Holder
The HQD digital measuring / electrode system combines reliability, flexibility and ease of use. The replaceable INTELLICAL electrodes are automatically recognized and store all the necessary data.
SKU: HQ430D.98.00012
Titralab AT1000 Series Potentiometric Titrator, 1 Burette
Titralab AT1000 Series Potentiometric Titrator for fast and accurate titration.
SKU: AT1102.98
TL2360 LED Turbidimeter, ISO, 0-10000 NTU
The new TL23 Series laboratory turbidity meters combine proven technology and advanced features to simplify industrial and wastewater analysis. Model TL2360 ISO. Light source: Light-emitting diode (LED) at 860 ± 30 nm. Measurement method: nephelometric. Measurement range: 0 - 10000 NTU.
SKU: LPV444.99.00320
